RAM 3500

POWER TRAIN:AUTOMATIC TRANSMISSION:GEAR POSITION INDICATION (PRNDL)

Chrysler (FCA US, LLC) is recalling certain Ram 2500 and Ram 3500 vehicles equipped with a 3.5" cluster and column shifter. A software error may cause the gear selection display to be inaccurate. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 101, "Control and Displays."

Risk: An inaccurate gear selection display may mislead the driver as to what gear is actually selected, leading to unexpected vehicle movement and increasing the risk of a crash.

AIR BAGS:SIDE/WINDOW:CURTAIN:INFLATOR

Chrysler (FCA US, LLC) is recalling certain 2016-2019 Ram 3500, Ram 1500, 2016-2020 Ram 2500, and 2016 Ram 3500 Cab Chassis vehicles. The right and left side curtain air bag inflators may rupture due to a manufacturing defect.

Risk: An inflator rupture may result in sharp metal fragments striking occupants, resulting in injury.

SERVICE BRAKES

Chrysler (FCA US, LLC) is recalling certain 2026 Ram 3500, 3500 Cab Chassis, 2500, 4500 Cab Chassis, and 5500 Cab Chassis vehicles. The instrument panel may display an incorrect brake system warning light. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 101, "Control and Displays."

Risk: An incorrect warning light can fail to alert the driver to critical safety information, increasing the risk of a crash.

AIR BAGS:SIDE/WINDOW:CURTAIN:INFLATOR

Chrysler (FCA US, LLC) is recalling certain 2018 Ram 1500, Ram 2500, and Ram 3500 vehicles. The right and left side curtain air bag inflators may rupture due to a manufacturing defect.

Risk: An inflator rupture may result in sharp metal fragments striking occupants, resulting in injury.

BACK OVER PREVENTION: SENSING SYSTEM: CAMERA

Chrysler (FCA US, LLC) is recalling certain 2021-2022 Dodge Durango, 2021-2023 Chrysler Pacifica, Jeep Grand Cherokee L, 2022 Ram 1500, 2500, 3500, Chrysler Voyager, 2022-2023 Jeep Compass, Grand Cherokee, Wagoneer, Grand Wagoneer, and Ram Promaster vehicles. The radio software may prevent the rearview image from displaying. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 111, "Rear Visibility."

Risk: A rearview camera image that does not display decreases the driver's visibility, increasing the risk of a crash.

POWER TRAIN:AUTOMATIC TRANSMISSION

Chrysler (FCA US, LLC) is recalling certain 2023 Ram 1500, 2500, and 3500 vehicles. An insufficient weld in the transmission control unit can allow transmission fluid to leak on to electrical components, resulting in a loss of drive power or loss of park function.

Risk: A loss of drive power or a loss of park function increase the risk of a crash.

STEERING:COLUMN

Chrysler (FCA US, LLC) (Stellantis) is recalling certain 2023-2024 Ram 1500, Jeep Wrangler, Jeep Wagoneer, Jeep Grand Wagoneer, Chrysler Pacifica, Ram 3500, Ram 3500 cab chassis, Ram 2500, Ram 4500 cab chassis, Ram 5500 cab chassis, 2023 Jeep Gladiator, Jeep Grand Cherokee, Jeep Grand Cherokee L, Ram 3500 Cab Chassis with a GVWR less than 10,000 lbs., and Chrysler Voyager vehicles. The steering column control module may not be welded properly, which can prevent the driver's air bag from deploying in a crash. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 208, "Occupant Crash Protection."

Risk: An air bag that does not deploy in a crash can increase the risk of injury.

SERVICE BRAKES, HYDRAULIC:ANTILOCK/TRACTION CONTROL/ELECTRONIC LIMITED SLIP:CONTROL UNIT/MODULE

Chrysler (FCA US, LLC) is recalling certain 2017-2018 Ram 2500 Pickup, Ram 3500 Pickup, 3500 Cab Chassis, 4500 and 5500 Cab Chassis vehicles. The hydraulic control unit (HCU) may fail, which can cause the anti-lock brake (ABS), electronic stability control (ESC), and traction control systems to fail.

Risk: A loss of anti-lock brakes, electronic stability control, or traction control can increase the risk of a crash.

ELECTRONIC STABILITY CONTROL (ESC):CONTROL MODULE

Chrysler (FCA US, LLC) is recalling certain 2022 Dodge Durango and Ram 2500 and 3500 vehicles. Due to a software malfunction, the ABS control module may disable the electronic stability control system. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 126, "Electronic Stability Control Systems."

Risk: Driving with a disabled electronic stability control system can increase the risk of a crash.

SERVICE BRAKES, HYDRAULIC

The contact owns a 2017 Ram 3500. The contact received notification of NHTSA Campaign Number: (SERVICE BRAKES, HYDRAULIC); however, the part to do the recall repair was unavailable. The local dealer was contacted, and it was confirmed that the part was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact stated that while operating the vehicle, the ABS and traction control warning light remained illuminated, with the cruise control feature was inoperable. The failure mileage was 92,000.

WHEELS

V06 Recall was attempted, but welding could not be done correctly - was told that was the "best they could do" truck continued to steer poorly (constantly have to hold the steering wheel to one side or the truck will veer out of the lane) bc steer ahead wrong, and to wear outer edge of the tires to an unsafe level in less than half the normal mileage. Now Dodge dealership/Stellantis claims the drag link assembly was permanently damaged by their prior recall work, and that truck cannot be aligned or driven safely but also won't fix it. They have been telling me they will action the case "today" or "one businesses day" since 27 Aug. I found out that the alignment and steering problem I had been spending money to fix since 2019 was a result of their poor recall repair and trying to get a response from Dodge Stellantis since AUG 06, and I have been without the use of the truck and unable to care for my horses since then. I have spent more than 14 hours directly on the phone with them without any action - my truck remains essentially impounded at the dealership. Est 20k miles at initial recall V06 failed repair attempt but their records should say. Current document is currently dealership that admitted the initial recall repair attempt damaged the draglink assembly beyond any hope of salvage/alignment.

SUSPENSION

V06 Recall was attempted, but welding could not be done correctly - was told that was the "best they could do" truck continued to steer poorly (constantly have to hold the steering wheel to one side or the truck will veer out of the lane) bc steer ahead wrong, and to wear outer edge of the tires to an unsafe level in less than half the normal mileage. Now Dodge dealership/Stellantis claims the drag link assembly was permanently damaged by their prior recall work, and that truck cannot be aligned or driven safely but also won't fix it. They have been telling me they will action the case "today" or "one businesses day" since 27 Aug. I found out that the alignment and steering problem I had been spending money to fix since 2019 was a result of their poor recall repair and trying to get a response from Dodge Stellantis since AUG 06, and I have been without the use of the truck and unable to care for my horses since then. I have spent more than 14 hours directly on the phone with them without any action - my truck remains essentially impounded at the dealership. Est 20k miles at initial recall V06 failed repair attempt but their records should say. Current document is currently dealership that admitted the initial recall repair attempt damaged the draglink assembly beyond any hope of salvage/alignment.

STEERING

V06 Recall was attempted, but welding could not be done correctly - was told that was the "best they could do" truck continued to steer poorly (constantly have to hold the steering wheel to one side or the truck will veer out of the lane) bc steer ahead wrong, and to wear outer edge of the tires to an unsafe level in less than half the normal mileage. Now Dodge dealership/Stellantis claims the drag link assembly was permanently damaged by their prior recall work, and that truck cannot be aligned or driven safely but also won't fix it. They have been telling me they will action the case "today" or "one businesses day" since 27 Aug. I found out that the alignment and steering problem I had been spending money to fix since 2019 was a result of their poor recall repair and trying to get a response from Dodge Stellantis since AUG 06, and I have been without the use of the truck and unable to care for my horses since then. I have spent more than 14 hours directly on the phone with them without any action - my truck remains essentially impounded at the dealership. Est 20k miles at initial recall V06 failed repair attempt but their records should say. Current document is currently dealership that admitted the initial recall repair attempt damaged the draglink assembly beyond any hope of salvage/alignment.

FUEL SYSTEM, DIESEL

The contact owns a 2020 Ram 3500. The contact stated that while driving at various speeds, the vehicle made an abnormal ticking sound. The vehicle was taken to the dealer, where it was diagnosed with high-pressure fuel pump failure, but the vehicle was not repaired at the time. The contact stated that upon pulling into a parking lot, the vehicle stalled. The vehicle failed to restart and was towed to the dealer, where it was diagnosed and determined that the high-pressure fuel pump had imploded, causing damage to the fuel system. The dealer related the failure to NHTSA Campaign Number: 21V880000 (Fuel System, Diesel), and the vehicle was repaired; however, the contact later became aware that the dealer had replaced the high-pressure fuel pump with the same part. The contact stated that upon taking the vehicle to an independent mechanic to be serviced, the mechanic informed the contact that the high-pressure fuel pump installed on the vehicle was not the recall part, but the same defective part. The mechanic recorded the high-pressure fuel pump and part number, and the vehicle was taken back to the dealer, where it was confirmed that the recall part had not been installed on the vehicle. The manufacturer was notified of the failure and referred the contact to the dealer for assistance. The contact stated that the dealer delayed performing the recall repair free of charge, which required the contact to pay for the replacement of the high-pressure fuel pump with the correct part. The vehicle was repaired. The contact stated that the manufacturer failed to complete the recall repair free of charge. The failure mileage was approximately 38,000.

SERVICE BRAKES, HYDRAULIC

The contact owns a 2017 Ram 3500. The contact stated that the messages "Service ABS System" and "Service Traction Control System" were displayed, and other unknown warning lights were illuminated intermittently. The contact received notification of NHTSA Campaign Number: 24V896000 (Service Brakes, Hydraulic); however, the part to do the recall repair was not yet available. The contact stated that while driving 70 MPH, the failure recurred, and the brake pedal was pulsating. The contact stated that it felt like the ABS was engaging and disengaging unintendedly, causing the vehicle to be pulled to one side. The contact was able to pull over to the side of the road. The vehicle was taken to an independent mechanic, where it was determined that the HCU needed to be replaced. The local dealer and several unknown dealers were contacted for the recall repair, but informed the contact the part was not yet available. The vehicle was not repaired. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the failure. The failure mileage was approximately 60,000.

TIRES:TREAD/BELT

The contact owns a 2017 Ram 3500 equipped with Nexen Tires, Tire size: 235/80/R17, Tire Line: Roadian ATX, DOT Numbers: 8EX6CMDL4517, 8EX6CMLL1616, 8EX6CMDR1017, 8EX6CMDL1017 and 8EX6CMCL1017. The contact stated while driving at various speeds, two of the tires exploded into pieces on different occasions. The contact was able to pull over to the side of the road. The vehicle was taken to a tire shop, where the tires were replaced. The contact stated that a third tire exploded while driving. The vehicle was taken to a tire shop, where it was recommended to replace all four tires because the tire brand and line was defective. The contact was informed that the tires were separating from inside out. The contact stated that the failure mainly occurred while hauling a camper. The manufacturer was contacted and advised the contact to install a gauge on each tire. The contact followed the manufacturer's instructions; however, the failure persisted. The contact filed a refund claim with the manufacturer and was informed that the claim was approved. The manufacturer advised the contact to destroy the tires and to send a picture of the destroyed tires. The contact followed the manufacturer's instructions but was later informed that the pictures were not received. The contact had not received a refund from the manufacturer. The tires were replaced with a different brand tire. The tires were original tires. The tire failure mileage was approximately 14,000. The vehicle mileage was approximately 14,000. The VIN was not available.

SERVICE BRAKES, HYDRAULIC

The contact owns a 2018 Ram 3500. The contact stated that while driving at an undisclosed speed, the ABS warning light illuminated. The vehicle was taken to the local dealer, who replaced the brakes, but the failure recurred. The contact received notification of NHTSA Campaign Number: 24V896000 (Service Brakes, Hydraulic). The local dealer was contacted ten times, but the vehicle was not diagnosed or repaired. The manufacturer was contacted on five occasions, but no assistance was provided. The failure mileage was approximately 56,843.

VEHICLE SPEED CONTROL

I have experienced two major issues. The dash cluster went blank. Not able to see any of the gauges. Vehicle ran, drove. Turned the truck on and off. Opening & closing the door to power off the truck. 15+/- minutes for the dash to return to normal. Supposedly an update to the program is pending. Second and major issue; while backing up, the truck came to a stop by itself, blocking an intersection. I was not able to place the truck in any gear. Warning light notified me that the truck was not in park. We were unable to push the truck out of the intersection. The dealer says when the "Wheel Speed Sensor" failed the truck is programed to be immobilized. I have recently returned from a trip to the Rockies pulling a 35 foot 5th wheel RV. I have traveled several mountain roads. One 12 mile stretch with a 8% grade. Had the wheel sensors failed on any of these roads the chance of and accident were great. Potentially deadly. This is a known issue. Ram has decided to use the newly redesigned parts for production of new vehicles. No parts are available or estimated ship date. My truck has been towed to Capitol Ram of Garner, NC and will sit until Ram decides to provide parts. Part numbers: 68646345AA Left & 68646344AA Right