RAM 2500

POWER TRAIN:AUTOMATIC TRANSMISSION:GEAR POSITION INDICATION (PRNDL)

Chrysler (FCA US, LLC) is recalling certain Ram 2500 and Ram 3500 vehicles equipped with a 3.5" cluster and column shifter. A software error may cause the gear selection display to be inaccurate. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 101, "Control and Displays."

Risk: An inaccurate gear selection display may mislead the driver as to what gear is actually selected, leading to unexpected vehicle movement and increasing the risk of a crash.

AIR BAGS:SIDE/WINDOW:CURTAIN:INFLATOR

Chrysler (FCA US, LLC) is recalling certain 2016-2019 Ram 3500, Ram 1500, 2016-2020 Ram 2500, and 2016 Ram 3500 Cab Chassis vehicles. The right and left side curtain air bag inflators may rupture due to a manufacturing defect.

Risk: An inflator rupture may result in sharp metal fragments striking occupants, resulting in injury.

SERVICE BRAKES

Chrysler (FCA US, LLC) is recalling certain 2026 Ram 3500, 3500 Cab Chassis, 2500, 4500 Cab Chassis, and 5500 Cab Chassis vehicles. The instrument panel may display an incorrect brake system warning light. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 101, "Control and Displays."

Risk: An incorrect warning light can fail to alert the driver to critical safety information, increasing the risk of a crash.

AIR BAGS:SIDE/WINDOW:CURTAIN:INFLATOR

Chrysler (FCA US, LLC) is recalling certain 2018 Ram 1500, Ram 2500, and Ram 3500 vehicles. The right and left side curtain air bag inflators may rupture due to a manufacturing defect.

Risk: An inflator rupture may result in sharp metal fragments striking occupants, resulting in injury.

BACK OVER PREVENTION: SENSING SYSTEM: CAMERA

Chrysler (FCA US, LLC) is recalling certain 2021-2022 Dodge Durango, 2021-2023 Chrysler Pacifica, Jeep Grand Cherokee L, 2022 Ram 1500, 2500, 3500, Chrysler Voyager, 2022-2023 Jeep Compass, Grand Cherokee, Wagoneer, Grand Wagoneer, and Ram Promaster vehicles. The radio software may prevent the rearview image from displaying. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 111, "Rear Visibility."

Risk: A rearview camera image that does not display decreases the driver's visibility, increasing the risk of a crash.

POWER TRAIN:AUTOMATIC TRANSMISSION

Chrysler (FCA US, LLC) is recalling certain 2023 Ram 1500, 2500, and 3500 vehicles. An insufficient weld in the transmission control unit can allow transmission fluid to leak on to electrical components, resulting in a loss of drive power or loss of park function.

Risk: A loss of drive power or a loss of park function increase the risk of a crash.

STEERING:COLUMN

Chrysler (FCA US, LLC) (Stellantis) is recalling certain 2023-2024 Ram 1500, Jeep Wrangler, Jeep Wagoneer, Jeep Grand Wagoneer, Chrysler Pacifica, Ram 3500, Ram 3500 cab chassis, Ram 2500, Ram 4500 cab chassis, Ram 5500 cab chassis, 2023 Jeep Gladiator, Jeep Grand Cherokee, Jeep Grand Cherokee L, Ram 3500 Cab Chassis with a GVWR less than 10,000 lbs., and Chrysler Voyager vehicles. The steering column control module may not be welded properly, which can prevent the driver's air bag from deploying in a crash. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 208, "Occupant Crash Protection."

Risk: An air bag that does not deploy in a crash can increase the risk of injury.

SERVICE BRAKES, HYDRAULIC:ANTILOCK/TRACTION CONTROL/ELECTRONIC LIMITED SLIP:CONTROL UNIT/MODULE

Chrysler (FCA US, LLC) is recalling certain 2017-2018 Ram 2500 Pickup, Ram 3500 Pickup, 3500 Cab Chassis, 4500 and 5500 Cab Chassis vehicles. The hydraulic control unit (HCU) may fail, which can cause the anti-lock brake (ABS), electronic stability control (ESC), and traction control systems to fail.

Risk: A loss of anti-lock brakes, electronic stability control, or traction control can increase the risk of a crash.

ELECTRONIC STABILITY CONTROL (ESC):CONTROL MODULE

Chrysler (FCA US, LLC) is recalling certain 2022 Dodge Durango and Ram 2500 and 3500 vehicles. Due to a software malfunction, the ABS control module may disable the electronic stability control system. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 126, "Electronic Stability Control Systems."

Risk: Driving with a disabled electronic stability control system can increase the risk of a crash.

STEERING

Truck was "repaired" under Recall V06. Drag link/track bar was welded in place, which was supposed to be a temporary fix until parts became available to replace the bad drag link. In Mar of this year, I had the ball joints replaced. Upon repair, my steering wheel was cocked to the left in order to drive straight. Brought the truck back to have that repaired. Service center told me that because the part had been welded, they would have to break the weld, center the steering wheel, and reweld the part. That took place but did not fix the problem. My truck still turns right when the steering wheel is level. I have since been caught between Ram Customer Care and the dealership with each telling me the other needs to "do something" and both referring me to the other for assistance. I have attached photos of the work done and a copy of the recall. The weld job done on my truck is horrible, if not unsafe. But, I have to drive my truck. I think Ram is taking advantage of the good faith the Administration has shown them by allowing them to decide whether to make the replacement of the part. It should be mandatory. Probably thousands of Ram trucks in a similar situation on America's roads. The welded adjustment sleeve makes a proper alignment of the steering wheel impossible. The alignment is designed to be adjusted. Finally, I noted that the dealership violated the "do not sell" of the recall. I bought the truck in March 2019, without the recall call work done - unbeknownst to me. They did not take the recall seriously.

SERVICE BRAKES, HYDRAULIC

The contact owns a 2018 Ram 2500. The contact received notification of NHTSA Campaign Number: 24V896000 (Service Brakes, Hydraulic); however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The contact had not experienced a failure.

ENGINE AND ENGINE COOLING

The contact owned a 2018 Ram 2500. The contact stated that while her husband was driving and pulling a fifth wheel RV, the check engine warning light and another unknown red warning light were illuminated. The contact's husband stopped in the middle of the road and immediately exited the vehicle with the contact's nephews and dog, who were also occupying the vehicle. The contact stated that the driver then noticed that there was a fire underneath the hood. The contact stated that her husband attempted to open the hood to extinguish the fire with a fire extinguisher, but the hood failed to open. The contact met her family at the scene. The contact stated that the front end of the vehicle exploded, there were abnormal popping sounds, and fire projectiles coming out from underneath the hood. The contact stated that the entire vehicle burned to the ground, and the front of the RV also caught on fire and burned. The contact stated that the fuel tank of the vehicle was full at the time of the incident. The contact stated that the forest near the camping ground nearly caught on fire. The fire department extinguished the fire, and a report was filed. A police report was filed, but the police report information was not available. Both the vehicle and the RV were towed and totaled. Both the contact and the passengers of the vehicle sustained emotional trauma from the incident. The dealer and the manufacturer were not notified of the failure. The failure mileage was approximately 95,000.

STEERING

The contact owns a 2015 Ram 2500. The contact stated that the vehicle was initially repaired under NHTSA Campaign Number: 19V021000 (Steering) at a local dealer; however, after the recall repair was performed, the vehicle was unable to receive a front alignment. The contact requested that the welds be removed to perform the alignment; however, several dealers and independent mechanics refused to remove the welds. The dealer had spoken with the manufacturer, but neither had offered any assistance. The Mopar manufacturer was also notified of the failure, and the contact was given a case number. The vehicle remained in the possession of the dealer. The failure mileage was approximately 106,000. The VIN was not available.

ELECTRICAL SYSTEM

While driving my 2025 RAM 2500, the entire digital dash is intermittently going dark and will stay dark for several minutes, powering back up and functions as it should then goes back out. This presents the possibility for significant hazard potential as all visual indicators for speed etc are lost. The vehicle loses the ability to use turn signals as well as many other functions while this is occurring.

VEHICLE SPEED CONTROL:CRUISE CONTROL

The contact owns a 2018 Ram 2500. The contact received notification of NHTSA Campaign Number: 24V896000 (Service Brakes, Hydraulic); however, the part to do the recall repair was not yet available. The contact stated that while driving at various speeds, the cruise control failed to activate as intended. The traction control and ABS warning lights were illuminated. Several local dealers were contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the failure. The failure mileage was approximately 40,000.

SERVICE BRAKES, HYDRAULIC

The contact owns a 2018 Ram 2500. The contact received notification of NHTSA Campaign Number: 24V896000 (Service Brakes, Hydraulic); however, the part to do the recall repair was not yet available. The contact stated that while driving at various speeds, the cruise control failed to activate as intended. The traction control and ABS warning lights were illuminated. Several local dealers were contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the failure. The failure mileage was approximately 40,000.

SERVICE BRAKES, HYDRAULIC

The contact owns a 2018 Ram 2500. The contact received notification of NHTSA Campaign Number: 24V896000 (Service Brakes, Hydraulic); however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The contact stated that while driving at an undisclosed speed, the check engine, ABS, and traction control warning lights illuminated intermittently. The dealer was made aware of the failure but confirmed that parts were not yet available. The vehicle was not repaired. The manufacturer was made aware of the failure. The failure mileage was approximately 100,000.

SERVICE BRAKES, HYDRAULIC

The contact owns a 2018 Ram 2500. The contact received notification of NHTSA Campaign Number: 24V896000 (SERVICE BRAKES, HYDRAULIC). The contact stated that the local dealer was contacted; however, the contact was informed that parts were not yet available. The vehicle was not repaired. The manufacturer was contacted about parts availability. The contact had not experienced a failure.