📧 info@texaslemonlaw.com 📞 +1 866 777 5045
Free Consultation Available

KENWORTH C500

View complaints and recalls by year, or see all recent reports below.

KENWORTH C500 Summary

18

Model Years

0

Total Complaints

50

Total Recalls

2007 - 2025

Year Range

Recent Recalls

2021 KENWORTH C500

996 vehicles affected

24V145000

SERVICE BRAKES, AIR:SUPPLY:RESERVOIR/TANK

PACCAR Incorporated (PACCAR) is recalling certain 2009-2021 Kenworth C500, 2012-2021 Kenworth T440, 2009-2015 Kenworth T660, 2015-2024 Kenworth T680, 2008-2024 Kenworth T800, 2009-2020 Kenworth T370, 2013-2023 Kenworth T880, 2011-2016 Kenworth T470, 2023 Kenworth T480, 2021-2023 Kenworth T800B, and 2009-2019 Kenworth W900 vehicles. The air tanks have an insufficient volume of air for the brake system. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 121, "Air Brake Systems."

Risk: Insufficient air volume can reduce braking performance and increase the risk of a crash.

2025 KENWORTH C500

5690 vehicles affected

24V789000

FUEL SYSTEM, DIESEL:DELIVERY:FUEL PUMP

PACCAR Incorporated (PACCAR) is recalling certain 2025 Kenworth C500, T680, T800, T880, W900, W990, Peterbilt 567, 579, and 589 trucks, equipped with Cummins X15 diesel engines. The fuel pump barrels may fracture and cause a fuel leak, which can result in an engine stall.

Risk: An engine stall increases the risk of a crash.

2022 KENWORTH C500

47500 vehicles affected

22V547000

STEERING

PACCAR Incorporated (PACCAR) is recalling certain 2022-2023 Kenworth T170, T270, T280, T370, T380, T440, T470, T480, T680, T800, T880, W900, W990, C500, and 2022-2023 Peterbilt 325, 330, 337, 348, 365, 367, 389, 520, 536, 537, 548, 567, and 579 vehicles. The steering gears may have been assembled incorrectly, which can cause the gears to fracture.

Risk: A fractured steering gear can cause a loss of steering control, increasing the risk of a crash.

2019 KENWORTH C500

25556 vehicles affected

18V931000

POWER TRAIN:CLUTCH ASSEMBLY

PACCAR Incorporated (PACCAR) is recalling certain 2018-2019 Peterbilt 337, 348, 365, 367, 389, 567, 579 and 587 trucks and 2018-2019 Kenworth C500, T270, T370, T440, T660, T680, T800, T880 and W900 trucks equipped with automated manual transmissions. An internal component in the clutch assembly may fail, possibly resulting in unintended vehicle movement.

Risk: Unintended movement of a vehicle can increase the risk of a crash.

2017 KENWORTH C500

48896 vehicles affected

18V657000

ENGINE AND ENGINE COOLING:ENGINE:DIESEL

PACCAR Incorporated (PACCAR) is recalling certain 2017-2019 Kenworth C500, T600, T660, T680, T800, T880 and W900 trucks, as well as Peterbilt 367, 386, 389, 567, 579 and 587 trucks, equipped with Cummins ISX15 or X15 diesel engines. In certain driving conditions, such as on a long down-hill grade, the fuel line may burst if the fuel pump cooling circuit screen becomes restricted.

Risk: If the fuel line bursts, fuel may leak onto the road resulting in a roadway hazard for other motorists. The engine may also stall without warning, resulting in the vehicle's inability to restart, increasing the risk of a crash.

2016 KENWORTH C500

11429 vehicles affected

18V555000

ENGINE AND ENGINE COOLING:ENGINE:DIESEL

PACCAR Incorporated (PACCAR) is recalling certain 2016-2019 Kenworth C500, T660, T800, and W900 vehicles, equipped with 1.9M ISX15 engines. The engine harnesses may have been manufactured without check engine light (CEL) and stop engine light (SEL) circuits, preventing the driver from being warned of a serious engine problem.

Risk: If the driver is not warned of a serious engine problem, the engine may unexpectedly fail, increasing the risk of a crash.

2018 KENWORTH C500

1737 vehicles affected

17V443000

FUEL SYSTEM, DIESEL

PACCAR Incorporated (PACCAR) is recalling certain 2017-2018 Peterbilt 367, 389, 567, 579 and 587 trucks, and 2018 Kenworth C500, T680, T800, T880 and W900 trucks equipped with Cummins ISX 15L engines. These engines have a fuel pump whose drive gear could possibly slip on its drive shaft, causing a fuel pump function loss, resulting in an engine stall.

Risk: An engine stall can increase the risk of a crash.

2017 KENWORTH C500

3227 vehicles affected

16V426000

ELECTRICAL SYSTEM:IGNITION:MODULE

PACCAR Incorporated (PACCAR) is recalling certain model year 2017 Kenworth C500, T660, T680, T800, T880, and W900 vehicles manufactured March 9, 2016, to April 26, 2016 and 2017 Peterbilt 320, 365, 367, 389, 567, 579, and 587 vehicles manufactured March 10, 2016, to May 6, 2016. The affected vehicles are equipped with Cummins ISX12 or ISX15 engines and have an engine control module (ECM) that may short circuit, causing the engine to stall without warning without the ability to restart it.

Risk: An engine stall can increase the risk of a crash.

2016 KENWORTH C500

104807 vehicles affected

15V271000

VISIBILITY:WINDSHIELD WIPER/WASHER:MOTOR

PACCAR Incorporated (PACCAR) is recalling certain model year 2011-2016 Kenworth T270, T370, T440, T470, C500, C540, C550, T660, T800, W900, and 963 trucks manufactured November 1, 2010, to April 6, 2015. In the affected trucks, water may leak into the wiper motor.

Risk: As water leaks in, the wiper may cease to function on the 'intermittent' setting, reducing the driver's visibility and increasing the risk of a crash. Additionally, the water may cause corrosion which, over time, may result in an electrical short, increasing the risk of a fire.

2014 KENWORTH C500

10414 vehicles affected

14V013000

SEAT BELTS

PACCAR Incorporated (PACCAR) is recalling certain model year 2014 Kenworth T660, T680, T700,T800, T880, W900, T440, T470, T370, T270, T170, C500, and C550 chassis manufactured between August 7, 2013, and October 31, 2013, and Peterbilt 320, 325, 330, 337, 348, 365, 367, 382, 384, 386, 388, 389, and 587 chassis manufactured between August 7, 2013, and November 3, 2013, and equipped with IMMI-brand L9 seat belt buckles. When the button is pressed to release the seat belt, the latch plate can become partially engaged with the buckle, making the seat belt difficult to unlatch. Thus, these vehicles fail to conform to the requirements of Federal Motor Vehicle Safety Standard (FMVSS) No. 209, "Seat Belt Assemblies."

Risk: If the latch plate remains partially engaged after the button is pressed, egress from the vehicle could be hindered which would increase the risk of injury in the event of an emergency.

Recent Complaints

No recent complaints found.