INFINITI QX56

AIR BAGS:FRONTAL:DRIVER SIDE:INFLATOR MODULE

Nissan North America, Inc. (Nissan) is recalling certain 2012-2017 NV Cargo and NV Passenger Van, 2013-2015 Titan and Armada and 2011-2012 Infiniti QX56 vehicles. Due to a manufacturing issue, the air bag inflator may not function properly or may rupture during deployment.

Risk: An inflator rupture may result in metal fragments striking the driver or other occupants resulting in serious injury or death.

AIR BAGS:FRONTAL:DRIVER SIDE:INFLATOR MODULE

Nissan North America, Inc. (Nissan) is recalling certain model year 2013 Infiniti QX56 vehicles manufactured September 1, 2012, to April 26, 2013, and 2014 Infiniti QX80 vehicles manufactured June 18, 2013, to February 11, 2014. In the affected vehicles, the driver's frontal air bag inflator may have been manufactured with an incorrect part.

Risk: In the event of a crash necessitating deployment of the driver's air bag, the incorrect part may block the flow of propellant to the air bag and the air bag's inflator may rupture. The rupture could cause metal fragments to strike and potentially seriously injure the vehicle occupants.

FUEL SYSTEM, GASOLINE

Nissan North America, Inc. (Nissan) is recalling certain model year 2012-2014 Nissan Juke, 2012-2013 Infiniti M56, QX56, and 2014-2015 Infiniti Q70 (V8 engine vehicles only), and QX80 vehicles. The fuel pressure sensors may not have been sufficiently tightened during production. As a result, the fuel pressure sensor may loosen with vehicle usage and cause a fuel leak.

Risk: A fuel leak in the presence of an ignition source could cause a vehicle fire.

AIR BAGS:SIDE/WINDOW

NISSAN IS RECALLING MODEL YEAR 2008 NISSAN ARMADA AND INFINITI QX56 VEHICLES MANUFACTURED FROM FEBRUARY 7, 2007 THROUGH FEBRUARY 14, 2007. THESE VEHICLES FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 201, "PROTECTION IN INTERIOR IMPACT." AN OUT-OF-SPECIFICATION A-PILLAR FINISHER MIGHT IMPEDE THE CORRECT INFLATION OF THE SIDE CURTAIN AIR BAG NEAR THE UPPER PORTION OF THE B-PILLAR.

Risk: INCORRECT INFLATION OF THE SIDE CURTAIN AIR BAG MAY INCREASE THE RISK OF INJURY TO A VEHICLE OCCUPANT IN THE EVENT OF A CRASH REQUIRING DEPLOYMENT OF THAT AIR BAG.

SUSPENSION:FRONT:CONTROL ARM:LOWER ARM

NISSAN IS RECALLING CERTAIN MODEL YEAR 2010 TITAN, ARMADA, QX56, FRONTIER, XTERRA, AND PATHFINDER VEHICLES MANUFACTURED FROM NOVEMBER 19, 2009 THROUGH MARCH 3, 2010. THE LOWER CONTROL LINK ASSEMBLY HAS TWO CYLINDRICAL COLLARS FORMING THE INBOARD ATTACHMENT POINTS TO THE CHASSIS. DUE TO AN IMPROPER WELDING PROCESS SOME COLLARS MAY CONTAIN WELDS THAT DO NOT MEET STRENGTH SPECIFICATIONS.

Risk: IF THE COLLAR WELD SEPARATES, THE VEHICLE HANDLING WILL DETERIORATE, POSSIBLY RESULTING IN A VEHICLE CRASH.

SERVICE BRAKES, HYDRAULIC:PEDALS AND LINKAGES

NISSAN IS RECALLING CERTAIN MODEL YEAR 2008-2010 TITAN, ARMADA, AND INFINITI QX56, AND MODEL YEAR 2008-2009 NISSAN QUEST VEHICLES. THE BRAKE PEDAL PIVOT PIN END WAS NOT SPIN-FORMED TO SPECIFICATION DURING THE MANUFACTURING PROCESS OF THE BRAKE PEDAL ASSEMBLY. THE PIVOT PIN COULD SLIDE AND CAUSE THE BRAKE PEDAL TO PARTIALLY DISENGAGE FROM THE BRAKE PEDAL BRACKET.

Risk: THE DRIVER WILL EXPERIENCE UNUSUAL AND NOTICEABLE LOOSENESS IN THE PEDAL AND A REDUCTION IN BRAKING FORCE INCREASING THE RISK OF A CRASH.

ENGINE AND ENGINE COOLING

NISSAN IS RECALLING CERTAIN MODEL YEAR 2004-2006 ARMADA, TITAN, INFINITI QX56 AND MODEL YEAR 2005-2006 FRONTIER, PATHFINDER AND XTERRA VEHICLES. THE INTELLIGENT POWER DISTRIBUTION MODULE (IPDM) ASSEMBLY CONTAINS AN ENGINE CONTROL MODULE (ECM) RELAY THAT HAS A DIODE FOR ELECTRICAL CURRENT NOISE REDUCTION. THE ECM RELAY MAY ALLOW SILICON VAPOR TO FORM AND, OVER TIME, THE SILICON EVAPORATES FROM THE DIODE MOLDING WHICH CAUSES SILICON OXIDE TO DEVELOP ON THE ECM RELAY CONTACT DUE TO ARCING.

Risk: THIS COULD CAUSE ENGINE STALLING INCREASING THE RISK OF A CRASH.

SUSPENSION:FRONT:CONTROL ARM:LOWER ARM

NISSAN IS RECALLING CERTAIN FRONT AND REAR LOWER LINKS, P/NOS. 54501ZQ00A, 54500ZQ00A, 551A1ZQ00A, 551A0ZQ00A , 54501EA00A, 54500EA00A, 551A1EA500, 551A0EA500, 54501ZR00A, AND 54500ZR00A, SOLD BETWEEN NOVEMBER 25, 2009 AND MAY 14, 2010 AS REPLACEMENT PARTS FOR MODEL YEAR 2004 THROUGH 2010 TITAN, ARMADA, AND QX56, AND MODEL YEARS 2005 THROUGH 2010 FRONTIER, XTERRA, AND PATHFINDER VEHICLES. THE LOWER CONTROL LINK ASSEMBLY HAS TWO CYLINDRICAL COLLARS FORMING THE INBOARD ATTACHMENT POINTS TO THE CHASSIS. DUE TO AN IMPROPER WELDING PROCESS SOME COLLARS MAY CONTAIN WELDS THAT DO NOT MEET STRENGTH SPECIFICATIONS.

Risk: IF THE COLLAR WELD SEPARATES, THE VEHICLE HANDLING WILL DETERIORATE, POSSIBLY RESULTING IN A VEHICLE CRASH.

SERVICE BRAKES

There are times when driving under 50 mph brake light comes on and the brakes have goes out which cause me to do an emergency pullover turn off the truck for a few minutes and the brakes reset. This is very concerning for me. This has happened on a few occasions.