INFINITI QX30
View complaints and recalls by year, or see all recent reports below.
INFINITI QX30 Summary
3
Model Years
9
Total Complaints
8
Total Recalls
2017 - 2019
Year Range
Recent Recalls
2017 INFINITI QX30
1959 vehicles affected
STEERING
Nissan North America, Inc. (Nissan) is recalling certain 2017 Infiniti QX30 vehicles. The steering shaft bore hole for the universal joint bearing may allow excessive movement that, over time, could result in the separation of the bearing and universal joint.
Risk: A separated universal joint bearing can cause a loss of steering control and increase the risk of a crash.
2019 INFINITI QX30
1228830 vehicles affected
BACK OVER PREVENTION: SENSING SYSTEM: CAMERA
Nissan North America, Inc. (Nissan) is recalling certain 2018-2019 Nissan Altima, Armada, Frontier, Kicks, Leaf, Maxima, Murano, NV, NV200, Pathfinder, Rogue, Rogue Sport, Sentra, Titan, Titan Diesel, Versa Note and Versa Sedan vehicles, as well as Infiniti Q50, Q60, QX30 and QX80 vehicles. Additionally included are 2019 Nissan GT-R and Taxi and Infiniti QX50, QX60, Q70, Q70L vehicles. The back-up camera and display settings can be adjusted such that the rear view image is no longer visible and the system will retain that setting the next time the vehicle is placed in reverse. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 111, "Rear Visibility."
Risk: The lack of an image in the back-up camera display increases the risk of a crash.
2018 INFINITI QX30
6 vehicles affected
SEAT BELTS:FRONT:ANCHORAGE
Nissan North America, Inc. (Nissan) is recalling certain 2018 Infiniti QX30 vehicles. The bolt securing the right-hand side lower seat belt anchorage may have been incorrectly installed during production. This can result in the lower seat belt anchorage detaching in a crash. As such, these vehicles fail to comply with certain requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 210, "Seat Belt Assembly Anchorages", number 209, "Seat Belt Assemblies, and number 208, "Occupant Crash Protection."
Risk: If the lower seat belt anchorage detaches in a crash, it can increase the risk of injury.
2018 INFINITI QX30
17507 vehicles affected
AIR BAGS:FRONTAL
Nissan North America, Inc. (Nissan) is recalling 2017-2018 Infiniti QX30 vehicles. The driver's air bag may unexpectedly deploy due to insufficient grounding of the steering components if an electrostatic discharge occurs and the air bag clockspring is broken.
Risk: If the driver air bag inadvertently deploys, it can increase the risk of injury and a crash.
2017 INFINITI QX30
79 vehicles affected
AIR BAGS:SIDE/WINDOW
Nissan North America Inc. (Nissan) is recalling certain 2017 Infiniti QX30 vehicles. The affected vehicles have a driver-side curtain air bag inflator initiator that may fail to ignite during a crash, preventing the air bag from deploying.
Risk: If the air bag fails to deploy in the event of a crash, it can increase the risk of injury.
2017 INFINITI QX30
509 vehicles affected
AIR BAGS:FRONTAL:PASSENGER SIDE:INFLATOR MODULE
Nissan North America, Inc. (Nissan) is recalling certain 2017 Infiniti QX30 vehicles manufactured August 11, 2016, to September 27, 2016. The affected vehicles have a passenger air bag inflator initiator that may fail to ignite during a crash, preventing the air bag from deploying. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 208, "Occupant Crash Protection."
Risk: A passenger air bag that fails to deploy in the event of a crash can increase the risk of injury.
Recent Complaints
2017 INFINITI QX30
ID: 2122706STEERING
The driver’s side heater does not function correctly. When heat is turned on, the passenger side warms but the driver’s side only blows cold air. This prevents the windshield on the driver’s side from properly defrosting/defogging in cold or wet conditions, which creates a serious visibility hazard. Additionally, none of the steering wheel controls function due to a diagnosed clock spring failure. This failure also affects the horn and may impact the driver’s airbag connection. A non-functioning horn prevents warning other drivers/pedestrians, and loss of airbag function creates a major crash safety risk. The vehicle was inspected at an Infiniti dealership, and the problems were confirmed. The issues appeared shortly after purchase and have been consistent since. Safety risk: – Reduced visibility due to inability to defrost/defog the driver’s side of the windshield. – Loss of horn function. – Potential failure of driver’s airbag deployment due to faulty clock spring.
2017 INFINITI QX30
ID: 2122705AIR BAGS
The driver’s side heater does not function correctly. When heat is turned on, the passenger side warms but the driver’s side only blows cold air. This prevents the windshield on the driver’s side from properly defrosting/defogging in cold or wet conditions, which creates a serious visibility hazard. Additionally, none of the steering wheel controls function due to a diagnosed clock spring failure. This failure also affects the horn and may impact the driver’s airbag connection. A non-functioning horn prevents warning other drivers/pedestrians, and loss of airbag function creates a major crash safety risk. The vehicle was inspected at an Infiniti dealership, and the problems were confirmed. The issues appeared shortly after purchase and have been consistent since. Safety risk: – Reduced visibility due to inability to defrost/defog the driver’s side of the windshield. – Loss of horn function. – Potential failure of driver’s airbag deployment due to faulty clock spring.
2017 INFINITI QX30
ID: 2122704VISIBILITY/WIPER
The driver’s side heater does not function correctly. When heat is turned on, the passenger side warms but the driver’s side only blows cold air. This prevents the windshield on the driver’s side from properly defrosting/defogging in cold or wet conditions, which creates a serious visibility hazard. Additionally, none of the steering wheel controls function due to a diagnosed clock spring failure. This failure also affects the horn and may impact the driver’s airbag connection. A non-functioning horn prevents warning other drivers/pedestrians, and loss of airbag function creates a major crash safety risk. The vehicle was inspected at an Infiniti dealership, and the problems were confirmed. The issues appeared shortly after purchase and have been consistent since. Safety risk: – Reduced visibility due to inability to defrost/defog the driver’s side of the windshield. – Loss of horn function. – Potential failure of driver’s airbag deployment due to faulty clock spring.
2018 INFINITI QX30
ID: 2100280UNKNOWN OR OTHER
I am reporting a serious manufacturer defect in my 2018 Infiniti QX30. The headliner has detached and is sagging, obstructing rear window visibility and presenting a potential distraction while driving. This impairment significantly reduces rear visibility and has created an ongoing safety risk, especially when changing lanes or reversing. Infiniti Consumer Affairs has acknowledged the defect and its safety concerns but has only offered partial repair coverage, which I have refused on the basis that no consumer should bear any cost for a safety-related manufacturer defect. The defect is not due to misuse, damage, or wear, and the vehicle is otherwise in good condition. This issue has been reported to multiple regulatory agencies. I am requesting that NHTSA investigate this matter as a potential safety hazard and evaluate whether it qualifies for a recall or manufacturer accountability. Vehicle Information: Year: 2018 Make: Infiniti Model: QX30 My vehicle is available for inspection although inspected by the dealership and they reportedit as CRITICAL. . .
2018 INFINITI QX30
ID: 2100279VISIBILITY/WIPER
I am reporting a serious manufacturer defect in my 2018 Infiniti QX30. The headliner has detached and is sagging, obstructing rear window visibility and presenting a potential distraction while driving. This impairment significantly reduces rear visibility and has created an ongoing safety risk, especially when changing lanes or reversing. Infiniti Consumer Affairs has acknowledged the defect and its safety concerns but has only offered partial repair coverage, which I have refused on the basis that no consumer should bear any cost for a safety-related manufacturer defect. The defect is not due to misuse, damage, or wear, and the vehicle is otherwise in good condition. This issue has been reported to multiple regulatory agencies. I am requesting that NHTSA investigate this matter as a potential safety hazard and evaluate whether it qualifies for a recall or manufacturer accountability. Vehicle Information: Year: 2018 Make: Infiniti Model: QX30 My vehicle is available for inspection although inspected by the dealership and they reportedit as CRITICAL. . .
2017 INFINITI QX30
ID: 2084338AIR BAGS
The contact owns a 2017 Infiniti QX30. The contact stated that while driving at an undisclosed speed, the air bag warning light illuminated. The vehicle was taken to the dealer, where it was diagnosed and determined that the clock spring module had failed and needed to be replaced. The vehicle was not repaired. The manufacturer was not made aware of the failure. The failure mileage was approximately 107,892.
2018 INFINITI QX30
ID: 2081368LANE DEPARTURE: BLIND SPOT DETECTION
Car has been having issues related to recall but is not on list.
2018 INFINITI QX30
ID: 2081367AIR BAGS
Car has been having issues related to recall but is not on list.
2017 INFINITI QX30
ID: 2073790AIR BAGS
Instrument panel showed "Front Left Malfunction Service Required ". I believe it says bad grounding circuit due to rust accumulation.