FORD RANGER

BACK OVER PREVENTION:SOFTWARE

Ford Motor Company (Ford) is recalling certain 2018-2022 Transit Connect, 2019-2020 MKZ, Edge, Continental, F-150, Nautilus, Fusion, 2019-2023 Ranger, Mustang, 2020-2021 EcoSport, Expedition, Navigator, 2020-2022 Escape, F-250 SD, Corsair, 2020-2023 Aviator, Transit, 2020-2024 Explorer, 2021-2024 Bronco Sport, and 2022-2024 Maverick vehicles. A software error may cause the rearview camera to display a blank image, or the image may remain on the display after the backing event has ended.

Risk: A rearview camera that displays a blank image can reduce the driver's view behind the vehicle. A rearview image that continues to be displayed after the vehicle is shifted out of reverse may distract the driver. Both of these situations can increase the risk of a crash.

SEATS:CRITICAL FASTENERS

Ford Motor Company (Ford) is recalling certain 2025 Ranger and Bronco vehicles. The bolts that secure the driver's seat frame to the body may be loose or missing. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 207, "Seating Systems."

Risk: A seat with loose or missing fasteners may not properly restrain an occupant during a crash, increasing the risk of injury.

AIR BAGS:SIDE/WINDOW:CURTAIN

Ford Motor Company (Ford) is recalling certain 2024-2026 Ranger vehicles. The side curtain air bags may contact the B-Pillar inner reinforcements and tear during deployment. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 226, "Ejection Mitigation."

Risk: Air bags that deploy improperly during a crash increase the risk of injury.

ELECTRICAL SYSTEM:SOFTWARE

Ford Motor Company (Ford) is recalling certain 2025 Ranger trucks. The instrument panel was not properly configured, preventing many of the the warning lights or gauges from properly displaying. This includes forward collision warnings, auto emergency braking, traction control, roll stability, and other gauges. The fuel gauge, distance to empty, and fuel economy may also not show accurately. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard numbers 101, "Control and Displays" and 126, "Electronic Stability Control Systems."

Risk: An instrument panel that does not clearly display critical safety information increases the risk of a crash.

SERVICE BRAKES, HYDRAULIC:POWER ASSIST:ELECTRIC:CONTROL MODULE:SOFTWARE

Ford Motor Company (Ford) is recalling certain 2025 Lincoln Navigator, F-150, Expedition, Bronco, and Ranger vehicles. The Electronic Brake Booster (EBB) module may malfunction while driving or when the driver is utilizing an Advanced Driver Assistance System (ADAS) feature, resulting in a loss of power brake assist.

Risk: An unexpected loss of power brake assist while driving can extend stopping distance and increase the risk of a crash. Additionally, a loss of power brake assist while ADAS features are engaged can result in the vehicle not braking as expected, increasing the risk of a crash.

BACK OVER PREVENTION: SENSING SYSTEM: CAMERA

Ford Motor Company (Ford) is recalling certain 2015-2019 Lincoln MKC, Mustang, F-350 SD, F-250 SD, F-450 SD, 2015-2017 Lincoln Navigator, Expedition, 2015-2018 Edge, Transit Connect, 2016-2019 F-550 SD, Transit, 2017-2019 Econoline, and 2019 Ranger vehicles. The rearview camera may display a distorted, inverted, or blank image when the vehicle is in reverse.

Risk: A rearview camera that displays an inverted, distorted, or blank image can reduce the driver’s view behind the vehicle, increasing the risk of a crash.

BACK OVER PREVENTION:SOFTWARE

Ford Motor Company (Ford) is recalling certain 2021-2024 Bronco, F-150, 2021-2024 Edge, 2022-2025 Escape, F-250, F-350, F-450, F-550, F-600, 2022-2024 Expedition, 2022-2025 Transit, 2021-2023 Mach-E, 2024 Ranger, Mustang, 2021-2023 Lincoln Nautilus, 2022-2024 Navigator, and 2023-2024 Corsair vehicles. A software error may cause the rearview camera image to delay, freeze, or not display when the vehicle is in reverse.

Risk: A frozen or missing rearview camera image can reduce the driver's view behind the vehicle, increasing the risk of a crash.

SUSPENSION:FRONT:CONTROL ARM:UPPER BALL JOINT

Ford Motor Company (Ford) is recalling certain 2024-2025 Bronco and Ranger vehicles. The front upper control arm ball joint fastener may be missing or tightened improperly, allowing the front upper control arm to detach from the knuckle assembly.

Risk: A detached control arm can cause a loss of vehicle steering and control, increasing the risk of a crash.

POWER TRAIN:AUTOMATIC TRANSMISSION:FLUID/LUBRICANT:VALVES/VALVE BODY

Ford Motor Company (Ford) is recalling certain 2024-2025 F-150, Bronco, 2024 Ranger, 2025 Mustang, Explorer, and Aviator vehicles. The transmission valve body may have been machined incorrectly, which can cause reverse gear failure, or unexpected forward movement in reverse or neutral gear.

Risk: Unexpected vehicle movement increases the risk of a crash.

POWER TRAIN

The contact owns a 2019 Ford Ranger. The contact stated that while driving at an undisclosed speed, the accelerator pedal was depressed; however, the vehicle failed to accelerate as intended. The contact stated that the transmission shuddered abnormally. In addition, while driving approximately 45 MPH, the vehicle drove without issues. No warning light was illuminated. The vehicle was taken to the dealer, and the failure was diagnosed as an internal transmission pump failure. The contact was informed that the transmission pump needed to be replaced. The vehicle was not repaired. In addition, the contact was informed that the manufacturer was aware of the failure; however, the repair was not covered under the recall. The manufacturer was made aware of the failure, and a case was filed. The contact was advised to contact the NHTSA Hotline to report the failure. The failure mileage was approximately 78,000.

AIR BAGS

Why hasn't Ford found replacement parts for this airbag defect. I don't feel safe driving a car that may cause more injury to my person if I'm in an accident. This should fixed immediately. Or I would like to return my vehicle for full refund or get a new one with out safety issues.

SEAT BELTS

Air bag malfunctions and not active passanger and driver side, hvac malfunction replaced twice, power train shifting out of gears, PCM malfunctions and triggering failures to sensors. Passanger seat belt not working. Collision sensor malfunction and not working.

POWER TRAIN

Air bag malfunctions and not active passanger and driver side, hvac malfunction replaced twice, power train shifting out of gears, PCM malfunctions and triggering failures to sensors. Passanger seat belt not working. Collision sensor malfunction and not working.

ELECTRICAL SYSTEM

Air bag malfunctions and not active passanger and driver side, hvac malfunction replaced twice, power train shifting out of gears, PCM malfunctions and triggering failures to sensors. Passanger seat belt not working. Collision sensor malfunction and not working.

SERVICE BRAKES

I have had the truck for 2 weeks. Three times I've almost rearended a car in front because of a braking system that doesn't stop the truck quickly enough. The pedal will travel 6" at times before it engages. This is very dangerous especially when braking when travelling around curves or round a bouts. I've taken the vehicle to two dealers and an independent brake shop. Dealers say it's normal. Independent brake shop warned against driving the truck. Town and Country stated that the pedal going to the floor is normal. No warning prior to this incident.

POWER TRAIN

Rough shift and jerkings around 35 to 40 mph

ENGINE

I was slowing down, foot off of throttle, to make a left turn. After completing turn and wanting to speed up, I had no throttle response for 2 or 3 seconds. Then all of a sudden back to normal. There was no accident. This has happened before, at least 3 times. Same/similar circumstances and result. I have not taken it to the dealer yet after reading other owners doing so and was not resolved.

ELECTRICAL SYSTEM

The Drive Mode Control has been malfunctioning and selecting different drive modes while the vehicle is in motion without any physical input from myself, the driver. While driving in the normal two-wheel drive high (2H) at various rates of speed the Drive Mode Control will start clicking and selecting different drive modes, such as going to four-wheel drive low (4L) or four-wheel drive high (4H) and a pop-up message in the instrument cluster display showing the change displaying Mud/Ruts, Sand, Slippery modes being selected. This has been continuously occurring randomly at both low and high rates of speed. There are never any objects or materials in contact with the Drive mode Control when this happens, it does it on it's own with an audible clicking noise. This is effectively putting myself, my family and other drivers safety at risk since the truck is making changes to the power train without any input from myself and I have to take my attention off the road to bring the truck back into normal two-wheel drive high (2H) mode. I have contacted both Ford Motor Company directly and my local Ford Dealer Service Center to try to have the vehicle inspected but have not been able to due their delay in being able to diagnose the vehicle. This has been going on for 4+ months and the date provided below is the last occurrence of the issue.