2009 TOYOTA SEQUOIA Complaints and Recall Information
The 2009 TOYOTA SEQUOIA has 0 complaints and 23 recalls filed with NHTSA. Owners most frequently report issues related to recall campaigns involving various vehicle systems. There are no recorded customer complaints detailing specific problems or failures.
There are 23 recalls affecting the 2009 TOYOTA SEQUOIA. These recalls involve multiple systems including the accelerator pedal, tire pressure monitoring, power window controls, seat heaters, and steering components among others.
Recalls- Accelerator pedal issue. Recall 10V017000 affects 2,230,661 vehicles including the 2009 Sequoia. The friction lever in the accelerator pedal sensor assembly can wear smooth, causing the pedal to become harder to press, slower to return, or stuck partially depressed, increasing crash risk. Dealers will install a reinforcement bar to ensure smooth operation at no charge.
- Incorrect tire labels. Recall 10V035000 affects 271,417 vehicles sold without proper load capacity labels required by federal safety standards. Dealers will provide corrected labels via mail or install them free of charge and update the owner’s manual accordingly.
- Tire pressure monitoring system non-compliance. Recall 11V148000 affects 22,000 vehicles, addressing failure to calibrate TPMS correctly on certain accessory wheels and tires, which prevents low tire pressure warning illumination. Dealers will recalibrate the system and update the information label at no charge.
- Power window master switch overheating. Recalls 12V491000 and 15V689000 cover over 4 million vehicles combined, including the 2009 Sequoia. Lubrication irregularities in the power window switch can cause overheating and melting, posing fire risk. Dealers will inspect, lubricate, or replace affected switches free of charge.
- Seat heater wiring damage. Recalls 14V743000 and 16V396000, affecting more than 11,000 vehicles, involve aftermarket seat heaters with copper strand elements. Seat cushion compression can damage wiring, potentially causing shorts and fire risk. Dealers will disconnect heaters and refund accessory costs at no charge.
- Power steering gear oil leaks. Recalls 21V920000 and 21E103000 affect over 22,500 vehicles. Improperly manufactured power steering gear assemblies may leak oil, leading to sudden loss of power steering assist and increased crash risk. Dealers will inspect and replace assemblies free of charge.
Owners of the 2009 TOYOTA SEQUOIA affected by repeated safety-related recalls or unresolved repairs should consider their state’s lemon law protections. These laws may provide rights for vehicles with persistent defects that impact safety or reliability.
2009 TOYOTA SEQUOIA Summary
2009
Model Year
0
Total Complaints
9
Total Recalls
6891381
Vehicles Affected
Recalls
2009 TOYOTA SEQUOIA
151 vehicles affected
STEERING:HYDRAULIC POWER ASSIST SYSTEM
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain JTEKT power steering gear assembly service parts for 2007-2021 Tundra and 2008-2022 Sequoia, part numbers 44250-0C160, 44250-0C131, 44250-0C170, and 11250-0C121. The power steering gear assembly may have been manufactured incorrectly, which can result in an oil leak.
Risk: An oil leak may cause a sudden loss of power steering assist, increasing the risk of a crash.
2009 TOYOTA SEQUOIA
22462 vehicles affected
STEERING:RACK AND PINION
Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2008-2022 Sequoia and 2007-2021 Tundra vehicles. The power steering gear assembly may have been manufactured incorrectly, which can result in an oil leak.
Risk: An oil leak may cause a sudden loss of power steering assist, increasing the risk of a crash.
2009 TOYOTA SEQUOIA
7749 vehicles affected
SEATS:FRONT ASSEMBLY:SEAT HEATER/COOLER
Southeast Toyota Distributors, LLC (SET) is recalling certain 2005-2011 4Runner, Highlander, Sequoia, and Sienna, 2005-2010 Avalon and Tundra, 2006-2008 Camry Solara, 2006-2010 Highlander hybrid, 2006-2011 Rav4 and Tacoma, 2007-2010 FJ Cruiser, 2007-2011 Camry hybrid, 2009-2010 Venza, 2010-2012 Prius, 1988-1990 and 2005-2010 Camry, and 1989 and 2009-2010 Corolla vehicles equipped with aftermarket accessory seat heaters with a copper strand heating element. The electrical wiring in the seat heaters may be damaged when the seat cushion is compressed.
Risk: If damaged, the copper strand heating element may short circuit, increasing the risk of a fire.
2009 TOYOTA SEQUOIA
1814284 vehicles affected
VISIBILITY:POWER WINDOW DEVICES AND CONTROLS
Toyota Motor Company (Toyota) is recalling certain model year 2009-2011 Tundra, Sequoia, Corolla, Corolla Matrix and Scion xB, 2008-2011 Highlander and Highlander Hybrid, 2007 Camry and Camry Hybrid, 2009 Camry and Camry Hybrid, 2006-2011 RAV4, 2006-2010 Yaris, and 2009-2010 Scion xD and Pontiac Vibe vehicles. During the manufacturing of the Power Window Master Switch (PWMS), grease lubricant may have been inconsistently applied to the sliding electrical contacts.
Risk: If the sliding electrical contacts are not protected by lubricant, debris and moisture that get into the switch may cause a short circuit and the switch assembly may overheat and melt, increasing the risk of a fire.
2009 TOYOTA SEQUOIA
3233 vehicles affected
SEATS:FRONT ASSEMBLY:SEAT HEATER/COOLER
Southeast Toyota Distributors, LLC (SET) is recalling certain model year 2010-2011 Prius and Corolla, 2009-2011 Venza, 2006-2010 Avalon, 2007-2010 FJ Cruiser, 2005-2011 Sienna and Sequoia, 2006-2011 Tacoma 4x2 and 4x4, Camry, Highlander, Tundra 4x2 and 4x4, and 2007-2011 Rav4 and 4Runner. The affected vehicles may experience compression of the seat cushion which may damage the seat heater wiring.
Risk: Damage to the seat heater wiring could cause the wires to short, increasing the risk of the seat burning and causing personal injury to the occupant.
2009 TOYOTA SEQUOIA
2519424 vehicles affected
VISIBILITY:POWER WINDOW DEVICES AND CONTROLS
Toyota is recalling certain model year 2007-2009 Camry, Camry Hybrid, RAV4, Corolla, Corolla Matrix, Tundra, Sequoia, Highlander, Highlander Hybrid, Yaris, Scion xB, Scion xD and Pontiac Vibe vehicles. The power window master switch assemblies in some of these vehicles were built using a less precise process for lubricating the internal components of the switch assemblies. Irregularities in this lubrication process may cause the power window master switch assemblies to malfunction and overheat.
Risk: If the switch overheats, it may melt, possibly resulting in a fire.
2009 TOYOTA SEQUOIA
22000 vehicles affected
TIRES:PRESSURE MONITORING AND REGULATING SYSTEMS
TOYOTA IS RECALLING CERTAIN MODEL YEAR 2008 THROUGH 2011 FJ CRUISER, LAND CRUISER, TACOMA, SEQUOIA AND TUNDRA VEHICLES FOR FAILING TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 138, "TIRE PRESSURE MONITORING SYSTEM (TPMS)." WHEN FACTORY-INSTALLED WHEELS AND TIRES WERE REPLACED WITH TOYOTA AUTHORIZED ACCESSORY WHEELS AND LT TIRES PRIOR TO FIRST SALE, THE TIRE PRESSURE MONITORING SYSTEMS WERE NOT RE-CALIBRATED CORRECTLY AND THEREFORE DO NOT START ILLUMINATING THE LOW TIRE PRESSURE WARNING TELLTALE AT THE REQUIRED MINIMUM ACTIVATION PRESSURE.
Risk: FAILURE TO WARN OF TIRE DEFLATIONS IS A NON-COMPLIANCE WITH FMVSS 138 AND COULD LEAD TO TIRE FAILURE INCREASING THE RISK OF A CRASH.
2009 TOYOTA SEQUOIA
271417 vehicles affected
EQUIPMENT:OTHER:LABELS
GULF STATES TOYOTA IS RECALLING CERTAIN MODEL YEAR 2005-2010 VEHICLES FOR FAILING TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 110, "TIRE SELECTION AND RIMS." THESE VEHICLES WERE SOLD BETWEEN SEPTEMBER 1, 2005 AND JUNE 2, 2008 WITHOUT THE REQUISITE LOAD CARRYING CAPACITY MODIFICATION LABELS.
Risk: THIS DOES NOT MEET THE STANDARD REQUIREMENTS.
2009 TOYOTA SEQUOIA
2230661 vehicles affected
VEHICLE SPEED CONTROL:ACCELERATOR PEDAL
TOYOTA IS RECALLING CERTAIN MODEL YEAR 2005-2010 AVALON, MODEL YEAR 2007-2010 CAMRY, MODEL YEAR 2009-2010 COROLLA, COROLLA MATRIX, RAV4, MODEL YEAR 2010 HIGHLANDER, MODEL YEAR 2008-2010 SEQUOIA, AND MODEL YEAR 2007-2010 TUNDRA VEHICLES. DUE TO THE MANNER IN WHICH THE FRICTION LEVER INTERACTS WITH THE SLIDING SURFACE OF THE ACCELERATOR PEDAL INSIDE THE PEDAL SENSOR ASSEMBLY, THE SLIDING SURFACE OF THE LEVER MAY BECOME SMOOTH DURING VEHICLE OPERATION. IN THIS CONDITION, IF CONDENSATION OCCURS ON THE SURFACE, AS MAY OCCUR FROM HEATER OPERATION (WITHOUT A/C) WHEN THE PEDAL ASSEMBLY IS COLD, THE FRICTION WHEN THE ACCELERATOR PEDAL IS OPERATED MAY INCREASE, WHICH MAY RESULT IN THE ACCELERATOR PEDAL BECOMING HARDER TO DEPRESS, SLOWER TO RETURN, OR, IN THE WORST CASE, MECHANICALLY STUCK IN A PARTIALLY DEPRESSED POSITION.
Risk: THE ACCELERATOR PEDAL MAY BECOME HARD TO DEPRESS, SLOW TO RETURN TO IDLE, OR, IN THE WORST CASE, MECHANICALLY STUCK IN A PARTIALLY DEPRESSED POSITION, INCREASING THE RISK OF A CRASH.
Complaints
No complaints found.