2016 THOMAS BUILT BUSES SAF-T-LINER EFX

STRUCTURE:BODY:ROOF AND PILLARS

Daimler Trucks North America, LLC (DTNA) is recalling certain 2011-2023 Thomas Built EFX and HDX school buses. The exterior roof panel was manufactured with insufficient joint strength. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 221, "School Bus Body Joint Strength."

Risk: A school bus exterior roof panel with insufficient joint strength may separate during a crash, increasing the risk of injury.

SEATS

Daimler Trucks North America LLC (DTNA) is recalling certain 2014-2020 Thomas Built Saf-T-Liner EFX, Minotour, Saf-T-Liner C2, and Saf-T-Liner HDX school buses equipped with SynTec S3B or S3C seats. The seats may have been manufactured with styrene blocks that may not provide sufficient impact absorption in certain specific areas around the steel seat frame of the back support. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 222, "School Bus Passenger Seating and Crash Protection."

Risk: The lack of impact absorption increases the risk of injury in the event of a crash.

SEATS

Daimler Trucks North America LLC (DTNA) is recalling certain 2014-2018 Thomas Built Buses Saf-T-Liner C2, Saf-T-Liner HDX, Saf-T-Liner EFX, and Minotour school buses equipped with S3B Restraint Wall Mounted Seats. The wall mounting bracket may crack, causing the seat to not remain secured in place in the event of a crash.

Risk: In the event of a crash, if the seat does not remain secured to the wall, the occupant has an increased risk of an injury.

SEATS

Daimler Trucks North America LLC (DTNA) is recalling certain 2014-2018 Thomas Built Buses Saf-T-Liner C2, Saf-T-Liner HDX, Saf-T-Liner EFX, and Minotour transit buses, equipped with certain Syntec-brand S3B, Non-Restraint, Wall Mounted Seats. The wall mounting bracket may crack, which may cause the seat to not remain secured in place in the event of a crash.

Risk: In the event of a crash, if the seat does not remain secured to the wall, the occupant has an increased risk of an injury.

SEATS

Daimler Trucks North America LLC (DTNA) is recalling certain 2014-2018 Thomas Built Buses Saf-T-Liner C2, Saf-T-Liner HDX, Saf-T-Liner EFX, and Minotour school buses, equipped with certain Syntec-brand S3B, Non-Restraint, Wall Mounted Seats. The wall mounting bracket may crack, which may cause the seat to not remain secured in place in the event of a crash.

Risk: In the event of a crash, if the seat does not remain secured to the wall, the occupant has an increased risk of an injury.

SEATS

Daimler Trucks North America LLC (DTNA) is recalling certain 2014-2018 Thomas Built Buses Saf-T-Liner C2, Saf-T-Liner EFX, Saf-T-Liner HDX, and Minotour transit buses, equipped with certain S3B Restraint Wall Mounted Seats. The wall mounting bracket may crack, causing the seat to not remain secured in place in the event of a crash.

Risk: In the event of a crash, if the seat does not remain secured to the wall, the occupant has an increased risk of an injury.

SEAT BELTS

Daimler Trucks North America LLC (DTNA) is recalling certain 2016-2017 Thomas Built Buses Saf-T-Liner C2, Saf-T-Liner EFX, Saf-T-Liner HDX, and Minotour SRW school buses, equipped with IMMI-brand 3-point lap and shoulder belts. Under load, the seat belt buckle mount rod can fracture. As such, these seats fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 210, "Seat Belt Assembly Anchorages."

Risk: In the event of a crash, if the buckle mount rod fractures, the seat occupant may not be restrained, increasing their risk of injury.

SEATS

Daimler Trucks North America LLC (DTNA) is recalling certain 2014-2018 Thomas Built Buses Saf-T-Liner EFX and Saf-T-Liner HDX school buses. The occupant seats may have been installed without under-rail washers, reducing their anchorage strength.

Risk: Without under-rail washers, in the event of a crash, the seats may come loose, increasing the risk of injury.

OTHER:SCHOOL BUS STOP ARM ASSEMBLY

Daimler Trucks North America LLC (DTNA) is recalling certain model year 2016-2017 Thomas Built Buses Saf-T-Liner C2, Saf-T-Liner HDX, Saf-T-Liner EFX, and Minotour DRW school buses manufactured from May 1, 2015, through November 16, 2015, equipped with certain Transpec T6000, T6100, and T7000 series school bus stop arms. The affected stop arms have a reflective decal that may peel loose from the stop arm. As such, these stop arms fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 131, "School Bus Pedestrian Safety Devices."

Risk: Without a reflective decal, the stop arms would have reduced visibility to other drivers, increasing the risk of a crash.

EQUIPMENT ADAPTIVE/MOBILITY

Daimler Trucks North America LLC (DTNA) is recalling certain model year 2015-2017 Thomas Built Buses Safe-T-Liner C2, Saf-T-Liner HDX, Saf-T-Liner EFX, and Minotour DRW school buses manufactured July 15, 2014, to July 21, 2016, and equipped with certain model S2005, S2010, S5005, S5010, S5505, and S5510 wheelchair lifts by Ricon. The affected lifts are equipped with folding link arms that may have pivot holes that are too big, allowing the bearings to move out of position.

Risk: If the bearings move out of position, the stowed platform may have excessive movement resulting in failure of the platform mounting. This failure could cause the wheel chair lift platform to fall out of the vehicle when the doors are opened, increasing the risk of injury for the lift operator.