2012 THOMAS BUILT BUSES SAF-T-LINER C2

SERVICE BRAKES, AIR:DISC

Daimler Trucks North America LLC (DTNA) is recalling certain 2010-2020 Thomas Built Buses Saf-T-Liner C2, 2016-2019 HDX, and 2017-2019 EFX school buses equipped with Bendix Air Disc Brakes. The driver side rear brakes may drag.

Risk: The dragging brakes may lead to high temperatures at the wheel end, increasing the risk of smoke and fire, possibly resulting in the bus having to be evacuated, which can increase the risk of injury.

EQUIPMENT

Daimler Trucks North America LLC (DTNA) is recalling certain 2002-2017 Thomas Built Buses Saf-T-Liner C2, Saf-T-Liner HDX, FS65, and Minotour school buses, equipped with Kidde Plastic-Handle or Push Button 'Pindicator' Fire Extinguishers. These extinguishers may become clogged, preventing the extinguisher from discharging as expected or requiring excessive force to activate the extinguisher. Additionally, in certain models, the nozzle may detach from the valve assembly with enough force that it could cause injury and also render the product inoperable. For a full list of the affected fire extinguisher models visit: https://static.nhtsa.gov/odi/rcl/2017/RMISC-17E062-5427.pdf

Risk: In the event of a fire, if the fire extinguisher does not function properly, it can increase the risk of injury.

FUEL SYSTEM, OTHER:DELIVERY:HOSES, LINES/PIPING, AND FITTINGS

Daimler Trucks North America LLC (DTNA) is recalling certain 2012-2018 Thomas Built Bus Saf-T-Liner C2 school buses. The affected vehicles are propane-powered and have propane fuel lines that may contact the transmission yoke, possibly causing a propane leak.

Risk: A propane leak in the presence of an ignition source can increase the risk of a fire.

EQUIPMENT

Daimler Trucks North America LLC (DTNA) is recalling certain 2005-2018 Thomas Built Buses Saf-T-Liner C2 school buses. In the event of a crash, the wheelchair pocket track anchorage may not adequately secure a the wheelchair.

Risk: In the event of a crash, an unsecured wheelchair may increase the risk of injury.

EQUIPMENT

Daimler Trucks North America LLC (DTNA) is recalling certain 2005-2018 Thomas Built Buses Saf-T-Liner C2 transit buses. In the event of a crash, the wheelchair pocket track anchorage may not adequately secure a the wheelchair.

Risk: In the event of a crash, an unsecured wheelchair may increase the risk of injury.

EQUIPMENT ADAPTIVE/MOBILITY

Daimler Trucks North America LLC (DTNA) is recalling certain model year 2006-2015 Thomas Built Buses FS-65, Saf-T-Liner C2, Saf-T-Liner EF, Saf-T-Liner EFX, Saf-T-Liner HDX, and Minotour DRW school buses manufactured January 3, 2006, to August 1, 2014, and equipped with certain Ricon model S2005, S2010, S5005, S5010, S5505, S5510 wheelchair lifts. The affected lifts are equipped with folding link arms that may have pivot holes that are too big, allowing the bearings to move out of position.

Risk: If the bearings move out of position, the stowed platform may have excessive movement resulting in failure of the platform mounting. This failure could cause the wheel chair lift platform to fall out of the vehicle when the doors are opened, increasing the risk of injury for the lift operator.

STRUCTURE:BODY:DOOR

Daimler Trucks North America LLC (DTNA) is recalling certain model year 2002-2004 Thomas Built Buses Saf-T-Liner ER, 2001-2005 Saf-T-Liner Conventional, 2002-2013 Saf-T-Liner MVP-EF, 2013 Saf-T-Liner EFX, 2001-2008 Saf-T-Liner FS65, 2005-2013 Saf-T-Liner C2, 2003-2013 Saf-T-Liner HDX, 2002-2003 Saf-T-Liner MVP-ER, 2002 Vista, and 2002-2003 TL-960 non-school buses. In the affected vehicles, the stem that connects the outside emergency door handle to the emergency door opening mechanism may corrode.

Risk: If the stem corrodes, the door handle could detach from the emergency door opening mechanism, delaying the opening of the door and the evacuation of the bus. In the event of an emergency, this may increase the risk of injury to the bus occupants.

STRUCTURE:BODY:DOOR

Daimler Trucks North America LLC (DTNA) is recalling certain model year 2002-2013 Thomas Built Buses Saf-T-Liner ER, 2001-2005 Saf-T-Liner Conventional, 2002-2013 Saf-T-Liner MVP-EF, 2013 Saf-T-Liner EFX, 2001-2008 Saf-T-Liner FS65, 2005-2013 Saf-T-Liner C2, 2003-2013 Saf-T-Liner HDX, 2002-2003 Saf-T-Liner MVP-ER, 2002 Vista, and 2002-2003 TL-960 school buses manufactured from February 5, 2001, through May 29, 2012. In the affected vehicles, the stem that connects the outside emergency door handle to the emergency door opening mechanism may corrode.

Risk: If the stem corrodes, the door handle could detach from the emergency door opening mechanism, delaying the opening of the door and the evacuation of the bus. In the event of an emergency, this may increase the risk of injury to the bus occupants.

POWER TRAIN:AUTOMATIC TRANSMISSION

Daimler Trucks North America (DTNA) is recalling certain model year 2011-2013 Thomas Built Saf-T-Liner C2 school buses manufactured December 3, 2009, through February 8, 2012, and equipped with Eaton hybrid automated transmissions. The software controlling the affected transmissions may improperly raise the vehicle's engine speed during downshifts without the driver's input.

Risk: The increase in engine speed may result in unintended acceleration, increasing the risk of a crash.

ENGINE AND ENGINE COOLING:ENGINE:DIESEL

Daimler Trucks North America (DTNA) is recalling certain model year 2011 through 2013 Thomas Built non-school buses manufactured from March 2010 through July 2012, equipped with Cummins ISB6.7 diesel engines manufactured from February 16, 2010, through May 4, 2012, containing a fan pulley, part number 3914462. The subject fan pulley is part of the accessory drive system on the front of the engine. This system is used to drive such components as the refrigerant compressors, the radiator fan, and the engine water pump. The web of the pulley can fatigue over time, causing the pulley to fail.

Risk: If this occurs, the fan belt may lose engagement of the water pump, allowing the cooling system to overheat. This may result in exceeding temperature limits, potentially disabling the school bus. If the school bus is occupied when it becomes disabled, the occupants would need to exit the vehicle and be transferred to another vehicle, putting them at risk of injury.

STRUCTURE:BODY:ROOF AND PILLARS

DAIMLER TRUCKS NORTH AMERICA (DTNA) IS RECALLING CERTAIN MODEL YEAR 2010 THROUGH 2013 THOMAS BUILT SAF-T-LINER EF, SAF-T-LINER HDX, SAF-T-LINER C2, AND MINOTOUR NON SCHOOL BUSES MANUFACTURED FROM APRIL 5, 2011, THROUGH APRIL 23, 2012, EQUIPPED WITH SPECIALTY MANUFACTURING INC. (SMI) PROLO ROOF HATCHES. INCREASED FRICTION BETWEEN THE REAR PLATE ASSEMBLIES, P/NO. 009327, AND THE NYLON REAR POP-UP SUPPORT, P/NO. 008956, MAY RESULT IN AN OPENING FORCE OF THE PROLO ROOF HATCHES THAT EXCEEDS FEDERAL STANDARD REQUIREMENTS. THUS, THESE HATCHES FAIL TO CONFORM TO THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 217, "BUS EMERGENCY EXITS AND WINDOW RETENTION AND RELEASE."

Risk: IN THE EVENT OF AN EMERGENCY, EGRESS OF THE BUS MAY BE HINDERED POSSIBLY RESULTING IN INJURY TO THE VEHICLE OCCUPANTS.

STRUCTURE:BODY:ROOF AND PILLARS

DAIMLER TRUCKS NORTH AMERICA (DTNA) IS RECALLING CERTAIN MODEL YEAR 2010 THROUGH 2013 THOMAS BUILT SAF-T-LINER EF, SAF-T-LINER HDX, SAF-T-LINER C2, AND MINOTOUR SCHOOL BUSES MANUFACTURED FROM APRIL 5, 2011, THROUGH APRIL 23, 2012, EQUIPPED WITH SPECIALTY MANUFACTURING INC. (SMI) PROLO ROOF HATCHES. INCREASED FRICTION BETWEEN THE REAR PLATE ASSEMBLIES, P/NO. 009327, AND THE NYLON REAR POP-UP SUPPORT, P/NO. 008956, MAY RESULT IN AN OPENING FORCE OF THE PROLO ROOF HATCHES THAT EXCEEDS FEDERAL STANDARD REQUIREMENTS. THUS, THESE HATCHES FAIL TO CONFORM TO THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 217, "BUS EMERGENCY EXITS AND WINDOW RETENTION AND RELEASE."

Risk: IN THE EVENT OF AN EMERGENCY, EGRESS OF THE BUS MAY BE HINDERED POSSIBLY RESULTING IN INJURY TO THE VEHICLE OCCUPANTS.

ENGINE AND ENGINE COOLING:ENGINE:DIESEL

Daimler Trucks North America (DTNA) is recalling certain model year 2011 through 2013 Thomas Built school buses manufactured from March 2010 through July 2012, equipped with Cummins ISB6.7 diesel engines manufactured from February 16, 2010, through May 4, 2012, containing a fan pulley, part number 3914462. The subject fan pulley is part of the accessory drive system on the front of the engine. This system is used to drive such components as the refrigerant compressors, the radiator fan, and the engine water pump. The web of the pulley can fatigue over time, causing the pulley to fail.

Risk: If this occurs, the fan belt may lose engagement of the water pump, allowing the cooling system to overheat. This may result in exceeding temperature limits, potentially disabling the school bus. If the school bus is occupied when it becomes disabled, the occupants would need to exit the vehicle and be transferred to another vehicle, putting them at risk of injury.

EXTERIOR LIGHTING:TURN SIGNAL

DAIMLER TRUCKS (DTNA) IS RECALLING CERTAIN MODEL YEAR 2012 THOMAS BUILT SAF-T-LINER SCHOOL BUSES MANUFACTURED FROM FEBRUARY 24, 2011, THROUGH AUGUST 3, 2011, EQUIPPED WITH BULK-HEAD MODULE SOFTWARE RELEASE 2.1 AND REFERENCE PARAMETER RELEASE P38407-06. INACCURATE FAULT DETECTION VALUES IN THE BULK-HEAD MODULE SOFTWARE MAY CAUSE THE SIDE MARKER/DIRECTIONAL LIGHTS TO STOP FUNCTIONING AFTER 5 TO 13 MINUTES OF VEHICLE OPERATION.

Risk: FAILURE OF THE SIDE MARKER/DIRECTIONAL LIGHTS TO ILLUMINATE WILL RESULT IN DECREASED VISIBILITY OF THE BUS AND/OR ITS INTENDED DIRECTION OF TRAVEL TO OTHER DRIVERS WHICH COULD INCREASE THE RISK OF A CRASH.

ENGINE AND ENGINE COOLING

DAIMLER TRUCKS IS RECALLING CERTAIN MODEL YEAR 2011- 2012 THOMAS BUILT SAF-T-LINER C2, SAF-T-LINER MVP-EF, AND SAF-T-LINER HDX SCHOOL BUSES MANUFACTURED FROM SEPTEMBER 1, 2010, THROUGH DECEMBER 31, 2010, EQUIPPED WITH A CUMMINS ISX OR ISL DIESEL ENGINE. THE V-BAND CLAMP ASSEMBLY, PART NUMBERS Q187684, Q187685, AND Q187686, USED TO CONNECT THE INLET AND OUTLET CONE SECTIONS TO THE DIESEL OXIDATION CATALYST (DOC)/DIESEL PARTICULATE FILTER (DPF) INCLUDE A T-BOLT WHICH CAN FRACTURE AND FAIL WHEN SUBJECTED TO STRESS OR LOAD. A FRACTURE OR FAILURE OF THE T-BOLT MAY CAUSE THE CLAMP TO LOOSEN AND THE INLET OR OUTLET SECTIONS ATTACHED TO THE DOC/DPF HOUSING TO DISCONNECT.

Risk: IF THE INLET OR OUTLET SECTIONS DISCONNECT, HOT EXHAUST GASES CAN VENT PRIOR TO EXITING THE TAILPIPE, CREATING THE RISK OF COMBUSTION AND A FIRE. IF BOTH CLAMPS FAIL, THERE IS A RISK IN SOME APPLICATIONS THAT THE DOC/DPF HOUSING MAY DETACH COMPLETELY, CREATING A ROAD HAZARD.