2010 MORGAN OLSON WALK IN VAN
View all complaints and recalls for this specific model year.
2010 MORGAN OLSON WALK IN VAN Summary
2010
Model Year
0
Total Complaints
3
Total Recalls
16193
Vehicles Affected
Recalls
2010 MORGAN OLSON WALK IN VAN
7853 vehicles affected
LATCHES/LOCKS/LINKAGES:DOORS:LATCH
Morgan Olson is recalling certain model year 2009-2011 walk-in van type vehicles with a gross vehicle weight rating in excess of 4,536kg (10,000lbs), manufactured from September 1, 2009, through January 19, 2012, with sliding front doors. These vehicles do not have either a primary door latch system, or a door closure warning system. Therefore, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard No. 206, "Door Locks and Door Retention Components."
Risk: Without either a primary door latch system or a door latch system with a fully latched position and a door closure warning system as required by FMVSS 206, the door could partially open without warning and the driver may not be aware that the door is not fully latched, putting the driver at an increased risk of injuries in the event of a crash.
2010 MORGAN OLSON WALK IN VAN
8316 vehicles affected
LATCHES/LOCKS/LINKAGES:DOORS:LATCH
CERTAIN MODEL YEAR 2009-2012 MORGAN OLSON WALK-IN VAN TYPE VEHICLES, MANUFACTURED FROM SEPTEMBER 1, 2009, THROUGH FEBRUARY 2, 2012, WITH SLIDING FRONT SIDE DOORS, HAVE DOOR LATCH SYSTEMS THAT FAIL TO MEET THE STRENGTH REQUIREMENTS OF S4.2.1.1(a) OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 206, "DOOR LOCKS AND DOOR RETENTION COMPONENTS," AND THEREFORE DO NOT COMPLY.
Risk: A DOOR LATCH SYSTEM THAT DOES NOT COMPLY WITH STRENGTH REQUIREMENTS MAY NOT REMAIN FULLY LATCHED KEEPING THE DOOR CLOSED, ESPECIALLY IN THE EVENT OF A CRASH, AND MAY INCREASE THE POSSIBILITY OF OCCUPANT PARTIAL OR FULL EJECTION.
2010 MORGAN OLSON WALK IN VAN
24 vehicles affected
EXTERIOR LIGHTING
Morgan Olson is recalling certain model year 2009 through 2011 walk-in trucks due to failure to conform to various Federal Motor Vehicle Safety Standards (FMVSS). These vehicles may fail to comply with one or more of the following: FMVSS No. 101, "Controls and Displays;" FMVSS No. 103, "Windshield Defrosting and Defogging Systems;" FMVSS No. 104, "Windshield Wiping and Washing Systems;" FMVSS No. 108, "Lamps, Reflective Devices, and Associated Equipment;" FMVSS No. 206, "Door Locks and Door Retention Components;" and 49 CFR Part 567 "Certification."
Risk: Failure of the vehicles to meet one or more required safety standards may increase the risk of a crash or personal injury.
Complaints
No complaints found.