MITSUBISHI OUTLANDER PHEV

STRUCTURE:BODY:HATCHBACK/LIFTGATE:SUPPORT DEVICE/STRUT

Mitsubishi Motors North America, Inc. (MMNA) is recalling certain 2018-2022 Outlander PHEV and 2014-2020 Outlander vehicles sold and/or currently registered in Alaska, Connecticut, Delaware, District of Columbia, Illinois, Indiana, Iowa, Kansas, Kentucky, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, North Dakota, Nebraska, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, South Dakota, Utah, Vermont, West Virginia, and Wisconsin. The liftgate gas spring cylinders may corrode and lose pressure, which can result in a gas spring cylinder rupture or the liftgate falling unexpectedly.

Risk: A gas spring cylinder rupture or a liftgate falling unexpectedly can increase the risk of injury.

BACK OVER PREVENTION:SOFTWARE

Mitsubishi Motors North America, Inc. (Mitsubishi) is recalling certain 2022-2024 Outlander and 2023-2025 Outlander PHEV vehicles. Due to a software error in the in-vehicle infotainment system (A-IVI), the rearview camera image may freeze, or not appear on the display. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 111, "Rear Visibility."

Risk: A rearview image that does not display properly reduces the driver's view of what is behind the vehicle, increasing the risk of a crash.

BACK OVER PREVENTION:DISPLAY FUNCTION

Mitsubishi Motors North America, Inc. (MMNA) is recalling certain 2022-2023 Outlander and 2023 Outlander PHEV vehicles. Due to a software error in the in-vehicle infotainment system (A-IVI), the backup camera rearview image may not appear on the display. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 111, "Rear Visibility."

Risk: A rearview camera that does not display an image can reduce the driver's rear view, increasing the risk of a crash or injury.

SEAT BELTS:REAR/OTHER

Mitsubishi Motors North America, Inc. (MMNA) is recalling certain 2019-2020 Outlander and 2019 Outlander PHEV vehicles. The seat belt for the right side second-row seat may have been assembled incorrectly.

Risk: An incorrectly assembled seat belt may not properly restrain the occupant, increasing the risk of injury in a crash.

SEAT BELTS: REAR/OTHER:BUCKLE ASSEMBLY

Mitsubishi Motors North America, Inc. (MMNA) is recalling certain 2014-2019 Outlander and 2018-2019 Outlander PHEV vehicles. The second-row center seat belt buckle may interfere with the right-side seat belt buckle when the seat backs are folded down. The interference may cause the right-side seat belt buckle cover to come off, making the buckle latch inoperable and unable to restrain an occupant.

Risk: An unrestrained occupant has an increased risk of injury in the event of a crash.

SERVICE BRAKES, HYDRAULIC:ANTILOCK/TRACTION CONTROL/ELECTRONIC LIMITED SLIP

Mitsubishi Motors North America, Inc. (MMNA) is recalling certain 2018 Mitsubishi Outlander Sport vehicles equipped with a Forward Collision Mitigation (FCM) system and 2018 Mitsubishi Outlander PHEV and Eclipse Cross vehicles and 2017-2018 Outlander vehicles equipped with an Adaptive Cruise Control (ACC) system and/or an Electric Parking Brake (EPB) system. The software for the Hydraulic Unit Electronic Control Unit (ECU) may be incorrect, possibly preventing the intervention of a safety system such as automatic emergency braking, Anti-lock Braking (ABS), Electronic Stability Control (ESC), or the Brake Auto Hold (BAH) function when any of these systems are in use.

Risk: If the safety systems do not function as intended, it can increase the risk of a crash.

ENGINE

The contact owns a 2023 Mitsubishi Outlander PHEV. The contact stated while driving at various speeds, the vehicle lost automotive power. The check engine warning light was illuminated. The vehicle was taken to a local dealer; however, the vehicle was not diagnosed. The vehicle was not repaired. The manufacturer was not made aware of the failure. The failure mileage was approximately 12,000.

ELECTRICAL SYSTEM

The contact owns a 2025 Mitsubishi Outlander PHEV. The contact stated upon pulling into her neighbor's driveway while depressing the brake pedal, the vehicle accelerated unintendedly and crashed into a brick wall that was 4 feet away. The brick wall was damaged. The air bags did not deploy. The contact stated that upon shifting to reverse while depressing the brake pedal, the vehicle accelerated unintendedly onto the road. The contact continuously depressed the brake pedal and the vehicle stopped in the middle of the road. The contact turned off the vehicle for a moment. The contact then restarted the vehicle and was able to safely pull to the side of the road. The contact stated that the regenerative braking mode was engaged at the time the incident occurred. The contact stated that there was a passenger in the front passenger's side seat at the time the incident occurred. The contact stated that the mason who provided an estimate of the brick wall damage and repair stated that the brick wall was severely damaged as if the vehicle that crashed into it was going at a high rate of speed. There was no injury sustained. No police report was filed. The vehicle was towed to an auto collision repair shop to be repaired. The manufacturer was notified of the failure and a case was filed. The manufacturer referred the contact to the dealer for assistance. The dealer was notified of the failure, but the vehicle was not diagnosed or repaired. The failure mileage was approximately 985.

SERVICE BRAKES, HYDRAULIC

The contact owns a 2025 Mitsubishi Outlander PHEV. The contact stated upon pulling into her neighbor's driveway while depressing the brake pedal, the vehicle accelerated unintendedly and crashed into a brick wall that was 4 feet away. The brick wall was damaged. The air bags did not deploy. The contact stated that upon shifting to reverse while depressing the brake pedal, the vehicle accelerated unintendedly onto the road. The contact continuously depressed the brake pedal and the vehicle stopped in the middle of the road. The contact turned off the vehicle for a moment. The contact then restarted the vehicle and was able to safely pull to the side of the road. The contact stated that the regenerative braking mode was engaged at the time the incident occurred. The contact stated that there was a passenger in the front passenger's side seat at the time the incident occurred. The contact stated that the mason who provided an estimate of the brick wall damage and repair stated that the brick wall was severely damaged as if the vehicle that crashed into it was going at a high rate of speed. There was no injury sustained. No police report was filed. The vehicle was towed to an auto collision repair shop to be repaired. The manufacturer was notified of the failure and a case was filed. The manufacturer referred the contact to the dealer for assistance. The dealer was notified of the failure, but the vehicle was not diagnosed or repaired. The failure mileage was approximately 985.