KENWORTH W990
View complaints and recalls by year, or see all recent reports below.
KENWORTH W990 Summary
9
Model Years
0
Total Complaints
40
Total Recalls
2018 - 2026
Year Range
Select Year
Recent Recalls
2026 KENWORTH W990
56260 vehicles affected
EXTERIOR LIGHTING:LIGHTING CONTROL MODULE:SOFTWARE
PACCAR Incorporated (PACCAR) is recalling certain 2024-2026 Kenworth T480, T680, T880, W990, Peterbilt 520, 536, 537, 548, 567, 579, 589, 2025 Kenworth T180, Peterbilt 535, 2025-2026 Kenworth T280, T380 and L770 vehicles. The tail brake light, upper and lower beam headlights, reverse light, and turn signal may not illuminate as intended. In addition, the lift axles, if lowered, may revert to a raised position, or oscillate up and down when the signal warning lights are activated. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 108, "Lamps, Reflective Devices and Associated Equipment."
Risk: Delayed and unsteady headlights can result in insufficient illumination of the road, decreasing the driver's visibility and increasing the risk of a crash. In addition, an unexpected position change of the lift axles may increase the risk of injury.
2026 KENWORTH W990
13908 vehicles affected
ELECTRICAL SYSTEM: INSTRUMENT CLUSTER/PANEL
PACCAR Incorporated (PACCAR) is recalling certain 2024-2026 Kenworth T680, T880, and W990 trucks. The 15-inch digital display may fail to display warning lights or vehicle speed. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) numbers 101, "Controls and Displays" and 121, "Air Brake Systems."
Risk: An instrument panel display that does not show critical information, such as warning lights or vehicle speed, increases the risk of a crash.
2025 KENWORTH W990
782 vehicles affected
STEERING:GEAR BOX:SHAFT SECTOR
PACCAR Incorporated (PACCAR) is recalling certain 2025 Peterbilt 536, 548, 567, 579, and Kenworth T280, T380, T480, T680, T880, and W990 vehicles. The steering gear sector shaft may have been improperly heat-treated, which can cause the gear teeth to crack or fracture.
Risk: Fractured steering gear teeth can cause a loss of steering control, increasing the risk of a crash.
2025 KENWORTH W990
7410 vehicles affected
STEERING:LINKAGES:DRAG:LINK:CONNECTION
PACCAR Incorporated (PACCAR) is recalling certain 2025 Kenworth K270, K370, L770, T280, T380, T480, T680, T880, W900, W990, 2025 Peterbilt 220, 520, 536, 537, 548, 567, 579, and 589 trucks. The tie rod or drag link assembly may contain an improperly heat-treated ball stud, causing the ball stud to break.
Risk: A broken ball stud can cause a complete loss of steering control, increasing the risk of a crash.
2025 KENWORTH W990
220764 vehicles affected
SERVICE BRAKES, HYDRAULIC:ANTILOCK/TRACTION CONTROL/ELECTRONIC LIMITED SLIP:CONTROL UNIT/MODULE
PACCAR Incorporated (PACCAR) is recalling certain 2021-2025 Peterbilt and Kenworth vehicles, equipped with Bendix EC80 Advanced Electronic Control Units (ECU). Please see the recall report for a complete list of models. Electrical noise and low signal to the power line carrier may cause the ECU to incorrectly process commands or stop functioning.
Risk: Safety systems that depend on the ECU (Automatic Traction Control, ABS, Electronic Stability Control, Active Cruise Control, and Collison Mitigation System) may not function properly or at all, increasing the risk of a crash.
2025 KENWORTH W990
70509 vehicles affected
POWER TRAIN:AUTOMATIC TRANSMISSION:LEVER AND LINKAGE:COLUMN SHIFT
PACCAR Incorporated (PACCAR) is recalling certain 2021-2024 Peterbilt 365, 367, 389, 535, 536, 537, 548, 567, 579, and 2021-2025 Kenworth T180, T280, T380, T480, T680, T880 and W990 trucks. The right-hand gear shifter stalk connectors may have been improperly crimped, resulting in a loss of communication.
Risk: A loss of communication between the gear shifter and the transmission may result in the vehicle becoming disabled after coming to a stop, increasing the risk of a crash.
2024 KENWORTH W990
68 vehicles affected
STEERING:LINKAGES:KNUCKLE:SPINDLE:ARM
PACCAR Incorporated (PACCAR) is recalling certain 2024 Peterbilt 367, 389, 520, 567, and Kenworth T800, T880, W900, and W990 trucks. The bearing journals may not be fully seated in the steering knuckle assemblies, preventing the proper installation of the wheel end hub assemblies.
Risk: An improperly installed wheel end hub assembly can leak oil, causing the axle spindles to loosen or fracture and increasing the risk of a crash.
2025 KENWORTH W990
45887 vehicles affected
STEERING
PACCAR Incorporated (PACCAR) is recalling certain 2024-2025 Kenworth T280, T380, T480, T680, T880, L770, W990, and 2024-2025 Peterbilt 389, 520, 535, 536, 537, 548, 567, 579, 589 trucks. The steering gear assemblies may have been assembled incorrectly with fewer recirculating balls than are required, which may result in a loss of steering control.
Risk: A loss of steering control increases the risk of a crash.
2025 KENWORTH W990
5690 vehicles affected
FUEL SYSTEM, DIESEL:DELIVERY:FUEL PUMP
PACCAR Incorporated (PACCAR) is recalling certain 2025 Kenworth C500, T680, T800, T880, W900, W990, Peterbilt 567, 579, and 589 trucks, equipped with Cummins X15 diesel engines. The fuel pump barrels may fracture and cause a fuel leak, which can result in an engine stall.
Risk: An engine stall increases the risk of a crash.
2020 KENWORTH W990
17641 vehicles affected
STEERING:CRITICAL FASTENERS
PACCAR Incorporated (PACCAR) is recalling certain 2018-2020 Kenworth T270, T370, T440, T470, T660, T680, T880, T800, W900, W990; and 2018-2020 Peterbilt 330, 337, 348, 365, 367, 389, 520, 567, and 579 vehicles. The Dana D-Series axle steer arm fasteners that attach the steering arm to the steering knuckle may fail.
Risk: Fastener failure can result in a loss of steering control, increasing the risk of a crash or injury.
Recent Complaints
No recent complaints found.