2016 IC BUS RESB

SERVICE BRAKES, AIR:SUPPLY:HOSES, LINES/PIPING, AND FITTINGS

Navistar, Inc. (Navistar) is recalling certain 2015-2018 IC Bus RE school buses. The drop hose fittings for the air brakes may not be oriented correctly, and, as a result, the brake hoses may contact the tire when the wheels are turned to the limit.

Risk: Contact with the tires may damage the service brake air hose, causing the brakes to become inoperative or lengthening the distance needed to stop the bus, increasing the risk of a crash.

SEAT BELTS

Navistar, Inc. (Navistar) is recalling certain 2017 IC Bus CE and 2016-2017 IC Bus RE school buses, equipped with certain IMMI school bus seat assemblies equipped with 3-point lap and shoulder belts. Under load, the seat belt buckle mount rod can fracture. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 210, "Seat Belt Assembly Anchorages."

Risk: In the event of a crash, if the buckle mount rod fractures, the seat occupant may not be restrained, increasing their risk of injury.

EQUIPMENT ADAPTIVE/MOBILITY

Navistar, Inc. (Navistar) is recalling certain model year 2015 IC Bus AE and BE, 2015-2017 CE and 2016-2017 RE school buses, equipped with certain model S2005, S2010, S5005, S5010, S5505, and S5510 wheelchair lifts by Ricon. The affected lifts are equipped with folding link arms that may have pivot holes that are too big, allowing the bearings to move out of position.

Risk: If the bearings move out of position, the stowed platform may have excessive movement resulting in failure of the platform mounting. This failure could cause the wheel chair lift platform to fall out of the vehicle when the doors are opened, increasing the risk of injury for the lift operator.

OTHER:SCHOOL BUS STOP ARM ASSEMBLY

Navistar, Inc. (Navistar) is recalling certain model year 2016-2017 IC CE school buses manufactured May 4, 2015, to December 15, 2015, and 2016 IC RE school buses manufactured July 17, 2015, to December 15, 2015, and equipped with certain Transpec T6000, T6100, and T7000 series school bus stop arms. The affected stop arms have a reflective decal that may peel loose from the stop arm. As such, these stop arms fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 131, "School Bus Pedestrian Safety Devices."

Risk: Without a reflective decal, the stop arms would have reduced visibility to other drivers, increasing the risk of a crash.

SEATS

Navistar, Inc. (Navistar) is recalling certain model year 2016 IC Bus RE school buses manufactured January 25, 2016, to March 31, 2016, equipped with Freedman-brand passenger seats with integrated child seats (ICS). These seats may separate from the base frame due to bolt failure. As, such these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 222, "School Bus Passenger Seating and Crash Protection."

Risk: In the event of a crash, the seat can separate from the base frame, increasing the risk of injury to the seat occupant.

STRUCTURE:EMERGENCY:ESCAPE/EGRESS/EXIT

Navistar, Inc. (Navistar) is recalling certain 2016-2017 IC Bus CE school buses manufactured June 15, 2015, to May 20, 2016, and RE school buses manufactured June 18, 2015, to April 27, 2016. These buses may have been manufactured without reflective outline tape around the emergency exit roof hatches. As a result, these vehicles fail to comply with the requirements for Federal Motor Vehicle Safety Standard (FMVSS) number 217, "Bus Emergency Exits and Window Retention and Release."

Risk: Absence of the reflective outline tape may reduce conspicuity of the emergency exit roof hatches, reducing the ability of emergency personnel to identify and gain access to the emergency roof hatches, possibly increasing the passenger's risk of personal injury or death during an emergency.

SERVICE BRAKES, AIR

Navistar, Inc. (Navistar) is recalling certain model year 2015-2016 IC CE school buses manufactured August 8, 2014, to February 20, 2015, and 2015-2016 IC RE school buses manufactured July 31, 2014, to January 9, 2015, equipped with Haldex air brake actuators. The affected brake actuators may have been manufactured with an incomplete attachment of the internal rubber diaphragm to the actuation mechanism. This could cause dragging or overheated brakes.

Risk: If the brakes drag and overheat there is an increased risk of a wheel end fire.