IC BUS FESB

EQUIPMENT ADAPTIVE/MOBILITY

Navistar, Inc. is recalling certain model year 2007-2015 IC BE and CE school buses, 2013-2015 IC AE school buses, 2007-2011 IC FE school buses, and 2007-2014 IC RE school buses equipped with certain model S2005, S2010, S5005, S5010, S5505, and S5510 wheelchair lifts by Ricon. The affected lifts are equipped with folding link arms that may have pivot holes that are too big, allowing the bearings to move out of position.

Risk: If the bearings move out of position, the stowed platform may have excessive movement resulting in failure of the platform mounting. This failure could cause the wheel chair lift platform to fall out of the vehicle when the doors are opened, increasing the risk of injury for the lift operator.

EQUIPMENT ADAPTIVE/MOBILITY

Navistar, Inc. (Navistar) is recalling certain model year 2013-2015 IC AE, 2007-2015 IC BE, CE, 2007-2011 IC FE, and 2007-2014 IC RE school buses equipped with certain model S2005, S2010, S5005, S5010, S5505, and S5510 wheelchair lifts manufactured by Ricon Corporation after January 1, 2006. The platform side plate of the affected wheelchair lifts may crack.

Risk: If the platform side plates crack, the lift platform can separate from the lift and come to rest against the vehicle's lift door. When the doors are opened, the platform may fall out, increasing the risk of injury to the lift operator.

ENGINE AND ENGINE COOLING

Navistar is recalling certain model year 2006 through 2011 IC school buses, models CESB, RESB, and FESB, manufactured from June 17, 2004, through October 15, 2009, equipped with I-6 engines within feature codes 12N (PL, PM, PN, PR, PS, PT, PU, PV, SA, SG, SK, SL, SM, SV, SZ, TB, UA, UB, UC, and UD). The high pressure engine oil line may develop a leak or possibly rupture.

Risk: A leak or rupture of the high pressure oil line could possibly result in an unexpected engine stall or may result in an engine compartment fire.

STRUCTURE:BODY:DOOR

NAVISTAR IS RECALLING CERTAIN MODEL YEAR 2008 THROUGH 2012 IC BE, CE, AND FE SCHOOL BUSES MANUFACTURED FROM NOVEMBER 1, 2006, THROUGH MAY 2, 2011. THE REFLECTIVE TAPE FOR THE REAR EXIT DOOR MAY NOT HAVE BEEN TOTALLY COMPLETED. ACCORDINGLY, THE BUSES FAIL TO CONFORM TO THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 217, "BUS EMERGENCY EXITS AND WINDOW RETENTION AND RELEASE."

Risk: THIS NONCOMPLIANCE MAY REDUCE CONSPICUITY OF THE REAR DOOR, REDUCING THE ABILITY OF EMERGENCY PERSONNEL TO IDENTIFY AND GAIN ACCESS TO THE REAR EXIT DURING AN EMERGENCY, POSSIBLY INCREASING THE OCCUPANT'S RISK OF PERSONAL INJURY OR DEATH DURING AN EMERGENCY.

EQUIPMENT ADAPTIVE/MOBILITY

NAVISTAR IS RECALLING CERTAIN MODEL YEAR 2009 THROUGH 2011 IC CE, FE, RE, AND BE MODEL SCHOOL BUSES MANUFACTURED FROM DECEMBER 10, 2007 THROUGH JANUARY 12, 2010 AND FITTED WITH RICON PUBLIC USE LIFTS. THE RESTRAINT BELT ON THESE LIFTS WAS DESIGNED TO PREVENT THE LIFT FROM MOVING, UNLESS THE TONGUE OF THE BELT IS FULLY ENGAGED AND LATCHED IN THE BUCKLE. RICON HAS DISCOVERED, HOWEVER, THAT IT IS POSSIBLE FOR THE OPERATOR TO INSERT THE BELT TONGUE INTO THE BUCKLE WITHOUT FULLY ENGAGING THE LATCHING MECHANISM. IN THIS CASE, THE RESTRAINT BELT WOULD APPEAR TO BE LATCHED, AND THE OPERATOR COULD RUN THE LIFT. IF THE RESTRAINT BELT TONGUE IS NOT FULLY ENGAGED INTO THE RESTRAINT BELT BUCKLE, AND LATCHED, THE LIFT MAY OPERATE WITH AN OCCUPANT ON THE PLATFORM.

Risk: THE USER OF THE LIFT COULD BE INJURED SHOULD THE LIFT MOVE WITHOUT THE RESTRAINT BELT PROPERLY BUCKLED.