2022 GRAND DESIGN IMAGINE

EQUIPMENT:RECREATIONAL VEHICLE/TRAILER:LPG SYSTEMS:LINES AND FITTINGS

Grand Design RV, LLC (Grand Design) is recalling certain 2022 Imagine, Reflection, Momentum, Solitude, and Transcend travel trailers. The quick disconnect fittings in the LP gas system may be cracked, causing a gas leak.

Risk: A gas leak in the presence of an ignition source can increase the risk of a fire.

EQUIPMENT:RECREATIONAL VEHICLE/TRAILER:LPG SYSTEMS:LINES AND FITTINGS

Grand Design RV, LLC (Grand Design) is recalling certain 2022 Grand Design Imagine, Reflection, Momentum, Solitude and Transcend travel trailers. The quick disconnect fittings in the LP gas system may be cracked, causing a gas leak.

Risk: A gas leak in the presence of an ignition source can increase the risk of a fire.

LATCHES/LOCKS/LINKAGES:DOORS:LATCH

Cracks in I-beams Cargo doors opening during transport Roof membrane structural issues Unit Information Date of Manufacture: 3/30/2022 Retail Sold Date: 7/11/2022

UNKNOWN OR OTHER

Cracks in I-beams Cargo doors opening during transport Roof membrane structural issues Unit Information Date of Manufacture: 3/30/2022 Retail Sold Date: 7/11/2022

STRUCTURE

While driving i had the frame ibeam break above rear passenger side shackle that holds the leaf spring and axel to frame. This was the actual ibeam/frame itself that broke about 2 inches above shackle weld. After further inspection we found an additional crack that started in the frame above the driver side rear shackle as well. If it broke it would have meant complete loss of axel. Luckily the leaf spring on passenger side with shackle and frame pined against bottom of frame.

UNKNOWN OR OTHER

While driving i had the frame ibeam break above rear passenger side shackle that holds the leaf spring and axel to frame. This was the actual ibeam/frame itself that broke about 2 inches above shackle weld. After further inspection we found an additional crack that started in the frame above the driver side rear shackle as well. If it broke it would have meant complete loss of axel. Luckily the leaf spring on passenger side with shackle and frame pined against bottom of frame.

SUSPENSION

While driving i had the frame ibeam break above rear passenger side shackle that holds the leaf spring and axel to frame. This was the actual ibeam/frame itself that broke about 2 inches above shackle weld. After further inspection we found an additional crack that started in the frame above the driver side rear shackle as well. If it broke it would have meant complete loss of axel. Luckily the leaf spring on passenger side with shackle and frame pined against bottom of frame.

UNKNOWN OR OTHER

We have been having problems with our slide out for 2 years. The slide mechanism kept getting damaged/"chewed up" and kept needing to be replaced. We could not get the slide to go in or out on its own several times over the 2-year period. After 2 years of taking it for repeated repairs, a Lippert tech came to the shop to inspect it. Per Lippert, the manufacturer of the chassis, "Inspection of chassis found cracks in mains at crossmember near center hanger. Hangers start to roll in one direction. Front header bent." We were told verbally by Lippert that there are, "Cracks in iBeams and unit is deflecting - rear of unit sagging - causing issues with slide." We now also have water damage in the opposing slide at the rear of the unit as well as mold, something we only recently discovered as we do not access that area often.

STRUCTURE

We have been having problems with our slide out for 2 years. The slide mechanism kept getting damaged/"chewed up" and kept needing to be replaced. We could not get the slide to go in or out on its own several times over the 2-year period. After 2 years of taking it for repeated repairs, a Lippert tech came to the shop to inspect it. Per Lippert, the manufacturer of the chassis, "Inspection of chassis found cracks in mains at crossmember near center hanger. Hangers start to roll in one direction. Front header bent." We were told verbally by Lippert that there are, "Cracks in iBeams and unit is deflecting - rear of unit sagging - causing issues with slide." We now also have water damage in the opposing slide at the rear of the unit as well as mold, something we only recently discovered as we do not access that area often.