2010 FORD FUSION
View all complaints and recalls for this specific model year.
2010 FORD FUSION Summary
2010
Model Year
44
Total Complaints
13
Total Recalls
6862563
Vehicles Affected
Recalls
2010 FORD FUSION
249 vehicles affected
AIR BAGS:FRONTAL
Ford Motor Company (Ford) is recalling certain air bag inflator and/or module replacement service parts that may have been used as part of a collision repair. The parts include certain driver-side air bag inflators and/or modules, designed to fit 2005-2014 Ford Mustang and Mustang GT500. It also includes certain passenger-side air bag inflators and/or modules designed to fit 2005-2014 Ford Mustang, 2010-2012 Lincoln MKZ, 2010-2012 Ford Fusion, 2010-2011 Mercury Milan, 2007-2011 Ford Ranger, and 2007-2010 Lincoln MKX vehicles. Please see Ford's recall report for the specific part numbers. These parts may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, temperature and temperature cycling.
Risk: In the event of a crash necessitating deployment of the frontal air bag, an inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.
2010 FORD FUSION
1067 vehicles affected
AIR BAGS:FRONTAL
Ford Motor Company (Ford) is recalling certain 2005-2014 Mustang, 2004-2011 Ranger, 2009-2011 Mercury Milan, 2006 Ford GT, 2008-2012 Fusion, 2007-2010 Edge and Lincoln MKX, and 2009-2010 Lincoln MKZ vehicles. These vehicles may be equipped with a driver or passenger frontal air bag inflator used as a replacement service part, that may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, temperature and temperature cycling.
Risk: In the event of a crash necessitating deployment of the frontal air bag, an inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.
2010 FORD FUSION
2602668 vehicles affected
AIR BAGS:FRONTAL:DRIVER SIDE:INFLATOR MODULE
Ford Motor Company (Ford) is recalling certain 2007-2011 Ranger, 2006-2012 Fusion, Lincoln Zephyr, Lincoln MKZ, 2006-2011 Mercury Milan, 2007-2010 Ford Edge, and Lincoln MKX vehicles. The driver's side air bag inflator may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, high temperatures, and high temperature cycling.
Risk: An inflator explosion may result in sharp metal fragments striking the driver or other occupants, resulting in serious injury or death.
2010 FORD FUSION
782384 vehicles affected
AIR BAGS:FRONTAL:PASSENGER SIDE:INFLATOR MODULE
Ford Motor Company (Ford) is recalling certain 2014 Ford Mustang vehicles sold, or ever registered, in the states of Alabama, California, Florida, Georgia, Hawaii, Louisiana, Mississippi, South Carolina, Texas, Puerto Rico, American Samoa, Guam, the Northern Mariana Islands (Saipan), and the U.S. Virgin Islands or "Zone A." Additionally, Ford is recalling certain 2011 Ford Ranger and Mercury Milan vehicles, 2011-2012 Ford Fusion and Lincoln Zephyr/MKZ vehicles and 2011-2014 Ford Mustang vehicles sold, or ever registered, in the states of Arizona, Arkansas, Delaware, District of Columbia, Illinois, Indiana, Kansas, Kentucky, Maryland, Missouri, Nebraska, Nevada, New Jersey, New Mexico, North Carolina, Ohio, Oklahoma, Pennsylvania, Tennessee, Virginia, and West Virginia or "Zone B." Ford is also recalling certain 2010 Ford Edge and Lincoln MKX vehicles, 2010-2011 Ford Ranger and Mercury Milan vehicles, 2010-2012 Ford Fusion and Lincoln Zephyr/MKZ vehicles, and 2010-2014 Ford Mustang vehicles sold, or ever registered, in the states of AK, CO, CT, ID, IA, ME, MA, MI, MN, MT, NH, NY, ND, OR, RI, SD, UT, VT, WA, WI, and WY or "Zone C." These vehicles are equipped with air bag inflators assembled as part of the passenger frontal air bag modules, used as original equipment or replacement equipment (such as after a vehicle crash necessitating replacement of the original air bags), that may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, temperature and temperature cycling.
Risk: An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.
2010 FORD FUSION
600166 vehicles affected
SERVICE BRAKES, HYDRAULIC:ANTILOCK/TRACTION CONTROL/ELECTRONIC LIMITED SLIP:CONTROL UNIT/MODULE
Ford Motor Company (Ford) is recalling certain 2006-2010 Ford Fusion, Mercury Milan, Lincoln Zephyr and MKZ vehicles. The valves within the ABS Hydraulic Control Units (HCU) may react with brake fluids containing specific corrosion preventative additives. This reaction may cause the valves to not close properly.
Risk: If the valves do not properly close, additional brake pedal travel may be required to stop the vehicle, increasing the risk of a crash.
2010 FORD FUSION
327796 vehicles affected
AIR BAGS:FRONTAL:PASSENGER SIDE:INFLATOR MODULE
Ford Motor Company (Ford) is recalling certain 2013 Ford Mustang vehicles sold, or ever registered in the states of Alabama, California, Florida, Georgia, Hawaii, Louisiana, Mississippi, South Carolina, Texas, Puerto Rico, American Samoa, Guam, the Northern Mariana Islands (Saipan), and the U.S. Virgin Islands or "Zone A." Additionally, Ford is recalling certain 2010 Ford Edge, Fusion, Mustang and Ranger, Lincoln MKX and Zephyr/MKZ, and Mercury Milan vehicles ever registered in the states of Arizona, Arkansas, Delaware, District of Columbia, Illinois, Indiana, Kansas, Kentucky, Maryland, Missouri, Nebraska, Nevada, New Jersey, New Mexico, North Carolina, Ohio, Oklahoma, Pennsylvania, Tennessee, Virginia, and West Virginia or "Zone B." Ford is also recalling certain 2009 Ford Edge, Fusion, Mustang and Ranger, Lincoln MKX and Zephyr/MKZ, and Mercury Milan vehicles ever registered in the states of Alaska, Colorado, Connecticut, Idaho, Iowa, Maine, Massachusetts, Michigan, Minnesota, Montana, New Hampshire, New York, North Dakota, Oregon, Rhode Island, South Dakota, Utah, Vermont, Washington, Wisconsin, and Wyoming or "Zone C." These vehicles are equipped with air bag inflators assembled as part of the passenger frontal air bag modules, used as original equipment or replacement equipment (such as after a vehicle crash necessitating replacement of the original air bags), that may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, temperature and temperature cycling.
Risk: An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.
2010 FORD FUSION
215 vehicles affected
AIR BAGS:FRONTAL:PASSENGER SIDE:INFLATOR MODULE
Ford Motor Company (Ford) is recalling certain 2010 Ford Fusion, Mercury Milan and 2010-2012 Lincoln MKZ vehicles that previously received a replacement passenger air bag under recall 16V-384, 17V-024 or 18V-046. In the event of a crash requiring deployment of the passenger air bag, the bracket that secures the air bag inflator to the module housing may deform, allowing the gas that inflates the air bag to leak out.
Risk: If the air bag does not inflate as intended, there is an increased risk of injury in the event of a crash.
2010 FORD FUSION
1892343 vehicles affected
AIR BAGS:FRONTAL:PASSENGER SIDE:INFLATOR MODULE
Ford Motor Company (Ford) is recalling certain model year 2007-2011 Ford Ranger vehicles, 2006-2011 Ford Fusion, Mercury Milan and Lincoln Zephyr/MKZ vehicles, 2007-2010 Ford Edge, Lincoln MKX vehicles, 2005-2006 Ford GT vehicles, and 2005-2011 Ford Mustang vehicles originally sold, or ever registered, in Alabama, California, Florida, Georgia, Hawaii, Louisiana, Mississippi, South Carolina, Texas, Puerto Rico, American Samoa, Guam, the Northern Mariana Islands (Saipan), and the U.S. Virgin Islands, or "Zone A." Additionally, unless included in "Zone A" above, Ford is recalling certain model year 2007-2008 Ford Ranger, Edge and Lincoln MKX vehicles, 2006-2008 Ford Fusion, Mercury Milan and Lincoln Zephyr/MKZ vehicles, 2005-2006 Ford GT vehicles and 2005-2008 Ford Mustang vehicles originally sold, or ever registered, in Arizona, Arkansas, Delaware, District of Columbia, Illinois, Indiana, Kansas, Kentucky, Maryland, Missouri, Nebraska, Nevada, New Jersey, New Mexico, North Carolina, Ohio, Oklahoma, Pennsylvania, Tennessee, Virginia, and West Virginia, or "Zone B." Any vehicle not included in "Zone A", or "Zone B" is not included in the safety recall. These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules, and used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the front air bags, these inflators may rupture due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling.
Risk: An inflator rupture may result in metal fragments striking the vehicle occupants resulting in serious injury or death.
2010 FORD FUSION
411205 vehicles affected
FUEL SYSTEM, GASOLINE:STORAGE:AUXILLARY TANK
Ford Motor Company (Ford) is recalling certain model year 2010-2011 Ford Fusion vehicles manufactured July 21, 2008, to March 4, 2011, and 2010-2011 Mercury Milan vehicles manufactured July 23, 2008, to December 10, 2010. The affected vehicles have fuel vapor canisters whose purge valves may not operate properly resulting in abnormal pressure changes in the fuel tank.
Risk: The pressure changes may cause the tank to crack and leak fuel. A fuel leak in the presence of an ignition source increases the risk of a fire.
2010 FORD FUSION
82579 vehicles affected
EQUIPMENT
Ford Motor Company (Ford) is recalling certain all weather driver side accessory floor mats sold for use in model year 2006-2011 Ford Fusion and Mercury Milan, 2006 Lincoln Zephyr, and 2007-2011 Lincoln MKZ vehicles manufactured November 9, 2007, through October 31, 2010. The affected floor mats may move and possibly interfere with the accelerator pedal.
Risk: The floor mat could shift such that it could interfere with the accelerator pedal, preventing its return to an idle position, which could result in unintended vehicle speeds, increasing the risk of a crash.
2010 FORD FUSION
128616 vehicles affected
WHEELS:LUGS/NUTS/BOLTS/STUDS
FORD IS RECALLING CERTAIN MODEL YEAR 2010-2011 FORD FUSION AND MERCURY MILAN VEHICLES EQUIPPED WITH 17 INCH STEEL WHEELS AND BUILT FROM APRIL 1, 2009, THROUGH APRIL 30, 2009, AND FROM DECEMBER 1, 2009, THROUGH NOVEMBER 13, 2010. THE WHEEL STUDS MAY FRACTURE, POTENTIALLY CAUSING A WHEEL TO SEPARATE.
Risk: WHILE DRIVING, MULTIPLE STUD FRACTURES COULD OCCUR AT THE WHEEL LOCATION, AND THE OPERATOR MAY EXPERIENCE VEHICLE VIBRATION AND/OR WHEEL SEPARATION, INCREASING THE RISK OF A CRASH.
2010 FORD FUSION
33256 vehicles affected
SEATS:FRONT ASSEMBLY:RECLINER
FORD IS RECALLING CERTAIN MODEL YEAR 2010 FUSION, EXPLORER, EXPLORER SPORT TRAC, AND MERCURY MILAN AND MOUNTAINEER VEHICLES MANUFACTURED BETWEEN DECEMBER 15, 2009 THROUGH FEBRUARY 3, 2010 EQUIPPED WITH FRONT SEAT MANUAL RECLINERS. THESE VEHICLES FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 202, "HEAD RESTRAINT." THE RECLINER GEAR PLATE TEETH MAY BE OUT OF DIMENSION SPECIFICATION WHICH COULD RESULT IN LIMITED PAWL TO GEAR PLATE TOOTH ENGAGEMENT.
Risk: IN THE EVENT OF A CRASH, THE SEATBACK AND HEAD RESTRAINT MAY MOVE REARWARD, INCREASING THE RISK OF INJURY.
2010 FORD FUSION
19 vehicles affected
POWER TRAIN:AUTOMATIC TRANSMISSION
FORD IS RECALLING CERTAIN MODEL YEAR 2010 FUSION, MILAN, AND ESCAPE VEHICLES MANUFACTURED FROM FEBRUARY 27, THROUGH MARCH 26, 2010. THE PARK ROD GUIDE RETENTION PIN MAY NOT HAVE BEEN PROPERLY INSTALLED WHICH FAILS TO CONFORM TO THE REQUIREMENT OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 114, "THEFT PROTECTION AND ROLLAWAY PREVENTION".
Risk: A VEHICLE PARKED WITHOUT AN ENGAGED PARK PAWL AND WITHOUT AN APPLIED PARKING BRAKE MAY HAVE UNINTENDED MOVEMENT WHICH MAY CAUSE A CRASH.
Complaints
2010 FORD FUSION
ID: 2127411SERVICE BRAKES
On [XXX] when leaving a shopping center parking lot, the brake system suddenly failed. I was able to press hard on the foot brake to stop the vehicle near the middle of the intersection. I pulled over to a parking space and replicated the issue. The car was towed to West 40 Auto Care on 284 Montvue Lane in Frederick, MD. Today, they told me they could not fix the issue. I made an appointment with the Ford Motor Company on 1 Waverly Drive for 9/15. I drove the car home slowly (about 1 mile) with the emergency lights on and going about 10 mph. Pressing hard on the foot brake will slowly stop the car. ABS icon and Service Advance Trac appear on the dashboard. Yesterday, the brake and wrench lights were also on. The footbrake does not go all the way to the floor. This issue is of course dangerous and might have caused an issue if I had to brake suddenly on a busy road at a higher speed. The issue appears to correspond with the link at [XXX] and summarized at [XXX] . I did not previously receive a recall issue in 2020. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
2010 FORD FUSION
ID: 2122867SERVICE BRAKES
ABS control module valves stuck open and or closed. Leading to no brakes/ brake pressure. Same issue and part that was recalled on 2006-2009.5 models. Issue has been inspected by Ford dealership in Tigard Oregon (Landmark Ford/Lincoln). Part was removed and sent to a 3rd party shop to be rebuilt per Landmark Ford and was unable to do so. There was 2 or 3 dash lights that came on along with no brakes. The issue first happened [XXX]. Dealership told me they had another vehicle in the shop at the same time with the same issue. Luckily the issue presented itself the morning of [XXX] as my wife was attempting to back out of her parking spot. She was able to pull the e-brake before the car got away from her. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
2010 FORD FUSION
ID: 2120344WHEELS:LUGS/NUTS/BOLTS/STUDS
The contact owns a 2010 Ford Fusion. The contact stated that while the vehicle was parked, the wheel studs on the front passenger’s wheel detached from the wheel. The dealer was not contacted. The vehicle was not diagnosed or repaired. The manufacturer was made aware of the failure and referred the contact to the NHTSA Hotline for further assistance. The failure mileage was approximately 61,000.
2010 FORD FUSION
ID: 2111693STEERING
The contact owns a 2010 Ford Fusion. The contact stated that while driving at various speeds, the steering wheel failed to turn in either direction. There was no warning light illuminated. In addition, the contact scanned the vehicle with an OBD2 scanner, and the vehicle was diagnosed, and the contact received with message that there was no powertrain DTCS present. The local dealer was not contacted. The vehicle was not diagnosed or repaired. The manufacturer was not made aware of the failure. The failure mileage was approximately 46,000.
2010 FORD FUSION
ID: 2111675STEERING
The contact owns a 2010 Ford Fusion. The contact stated that after starting the vehicle, the steering wheel became difficult to turn in either direction. The contact stated that the failure was intermittent. The cause of the failure was not yet determined. The local dealer was notified of the failure. The manufacturer was not yet contacted. The failure mileage was 46,000.
2010 FORD FUSION
ID: 2109714STEERING
The contact owned a 2010 Ford Fusion. The contact stated that while her son was driving 35 MPH, the steering wheel locked, became difficult to maneuver, causing the contact son vehicle to encounter a tree. No warning light was illuminated. The air bag did not deploy. The contacts son called 911 after the failure. The contact son sustained injuries to the chest, face, back of his neck, and his knees. A police report was filed. Medical attention was required. The vehicle was towed to Larry Campbell's Towing Garage. The insurance company deemed the vehicle a total loss. The vehicle's steering wheel was repaired once. The manufacturer was notified of the failure and closed contact case due to not being able to obtain the vehicle to remove a part of the vehicle. The failure mileage was 189,000.
2010 FORD FUSION
ID: 2108651STEERING
The contact owns a 2010 Ford Fusion. The contact stated that while driving at an undisclosed speed, the steering wheel seized with the power steering warning light illuminated. The contact stated that the steering wheel became difficult to turn. The dealer was not contacted. The vehicle was not diagnosed or repaired. The manufacturer was made aware of the failure and referred the contact to the NHTSA Hotline for assistance. The failure mileage was not available.
2010 FORD FUSION
ID: 2106800SERVICE BRAKES, HYDRAULIC
The contact's mother owns a 2010 Ford Fusion. The contact stated that while her mother was driving at various speeds, the power steering assist failed to perform as needed and excessive force was needed to steer the vehicle. The contact stated that the "Check Brake System" and "Brake" messages were displayed on the instrument panel. The contact took the vehicle to an independent mechanic and was informed that the ABS module and power steering gear assembly needed to be replaced. The mechanic was notified of the failure and referred the contact to the NHTSA Hotline to report the failure. The vehicle was not repaired. The failure mileage was 98,062.
2010 FORD FUSION
ID: 2106799STEERING
The contact's mother owns a 2010 Ford Fusion. The contact stated that while her mother was driving at various speeds, the power steering assist failed to perform as needed and excessive force was needed to steer the vehicle. The contact stated that the "Check Brake System" and "Brake" messages were displayed on the instrument panel. The contact took the vehicle to an independent mechanic and was informed that the ABS module and power steering gear assembly needed to be replaced. The mechanic was notified of the failure and referred the contact to the NHTSA Hotline to report the failure. The vehicle was not repaired. The failure mileage was 98,062.
2010 FORD FUSION
ID: 2105015STEERING
The contact owns a 2010 Ford Fusion. The contact stated while driving 40 MPH and attempting to make a right turn, the steering wheel became difficult to maneuver. The contact stated that the vehicle was still drivable. The contact stated that the “Service Power Steering Now” warning light was illuminated. The contact attempted to reset the vehicle and the message was displayed on the instrument panel. The vehicle was taken to an independent mechanic to be diagnosed; however, the result was unknown. The vehicle was not repaired. The manufacturer was notified of the failure but offered no assistance. The approximate failure mileage was 267,281.
2010 FORD FUSION
ID: 2104330ELECTRICAL SYSTEM
The power steering has failed. The dashboard showed these two phrases "Service Advancetrac" - yellow "Service power steering now" - red When that happened the first time the dealership was able to fix it under the customer satisfaction program by providing a module software update. But the issue happened again and I believe it is related to the 15V340 recall. I would like that to be investigated.
2010 FORD FUSION
ID: 2104329STEERING
The power steering has failed. The dashboard showed these two phrases "Service Advancetrac" - yellow "Service power steering now" - red When that happened the first time the dealership was able to fix it under the customer satisfaction program by providing a module software update. But the issue happened again and I believe it is related to the 15V340 recall. I would like that to be investigated.
2010 FORD FUSION
ID: 2104270SERVICE BRAKES
There is a recall date on this car dating back 2021. I bought this car in 2024. The recall problems was never addressed or fixed. This had created an electrical error in the car, given no airbags, and windows do not roll, nor does it give accurate reads on tire pressure. Unbeknownst of all this, a tire popped nearly cause me to wreck on I-5 early 2024. I have documentation supporting the sale of the car, the replacement of tires, oil changes, repairs & towing incurred all on behalf of this car. I would not have bought it knowing there was a recall that was not addressed. This car is a rebuilt title that has been in accidents.
2010 FORD FUSION
ID: 2104269ELECTRICAL SYSTEM
There is a recall date on this car dating back 2021. I bought this car in 2024. The recall problems was never addressed or fixed. This had created an electrical error in the car, given no airbags, and windows do not roll, nor does it give accurate reads on tire pressure. Unbeknownst of all this, a tire popped nearly cause me to wreck on I-5 early 2024. I have documentation supporting the sale of the car, the replacement of tires, oil changes, repairs & towing incurred all on behalf of this car. I would not have bought it knowing there was a recall that was not addressed. This car is a rebuilt title that has been in accidents.
2010 FORD FUSION
ID: 2104268AIR BAGS
There is a recall date on this car dating back 2021. I bought this car in 2024. The recall problems was never addressed or fixed. This had created an electrical error in the car, given no airbags, and windows do not roll, nor does it give accurate reads on tire pressure. Unbeknownst of all this, a tire popped nearly cause me to wreck on I-5 early 2024. I have documentation supporting the sale of the car, the replacement of tires, oil changes, repairs & towing incurred all on behalf of this car. I would not have bought it knowing there was a recall that was not addressed. This car is a rebuilt title that has been in accidents.
2010 FORD FUSION
ID: 2102791FUEL/PROPULSION SYSTEM
Car was checked for recall 15S34 and incorrectly determined to not have a problem. This recall deals with the gas tank cracking open. This car will pool gas on the ground under the car. Ford says since this was previously looked at, even if the determination was false, they will not take any action or help with it. Please assist - this is a known problem and should be repaired under the recall.
2010 FORD FUSION
ID: 2097935SERVICE BRAKES
Hydrologic control and abs unit failed. Ford addressed the issue but did NOT include ever vin that was affected. Almost got into an accident and crashed when my brakes completely failed from a defective part. The problem has been confirmed by a independent service, no warning light or messages. Many other people with this issue that were not covered by the lackluster recall.
2010 FORD FUSION
ID: 2097209STEERING
The steering wheel locks up. It happens when you make a sharp turn or when you turn on air conditioning a few minutes later steering locks. There has been a recall why wasn’t Ford Fusion included. If it was can I still get if repaired.
2010 FORD FUSION
ID: 2097021SERVICE BRAKES, HYDRAULIC
The contact called on behalf of the owner of a 2010 Ford Fusion. The contact stated that while the vehicle was being serviced, the owner was informed that the brake pads, calipers, and rotors were damaged and needed to be replaced. The vehicle was repaired. While the vehicle was having the emissions test performed, there was smoke coming from the front of the vehicle. The vehicle was taken to the dealer where it was diagnosed and determined that the brake lines were damaged and needed to be replaced. The vehicle was repaired. The contact stated that after investigating the failure, the vehicle owner related the failure to NHTSA Campaign Number: 19V904000 (SERVICE BRAKES, HYDRAULIC); however, the VIN was not included. The manufacturer was contacted and referred the contact to NHTSA Hotline to report the failure. The failure mileage was 148,550.
2010 FORD FUSION
ID: 2093858SERVICE BRAKES
I have a 2010 Ford Fusion. Two days ago I was backing out of the parking lot and I had to brake hard to avoid a fast moving car zooming past behind me. After that I noticed the brake was very mushy and I have to press the brake almost to the floor to get the car to stop. I did some research on the internet and found out it was a common problem with Ford fusion between 2006 and 2010 and there is a safety recall 19S54 for the 2006-2010 Ford Fusion. Ford also has an internal Customer Satisfaction program 21N11 that covers the repair of the said issue. However, the recall only covers cars manufactured between February 22, 2006 through July 15, 2009 and my car was manufactured in Dec 2009 and was not included on the recall list. Obviously the problem was not fixed for Ford Fusion manufactured after the 7/15/2009. I have seen many similar complaints on the net and some have indicated that they have filed NHSTA complaints for the same issue. I contacted Ford and see if they will fix the problem with my car as a goodwill gesture even though my car was not on the recall list. They absolutely refused to take responsibility. I think it is a serious, serious safety issue for the driving public and Ford should be told to extend the 19S54 recall cut off date to cover any vehicle that experienced this ABS/HCU braking problem and fix this manufacturing defect.
2010 FORD FUSION
ID: 2093415FORWARD COLLISION AVOIDANCE: AUTOMATIC EMERGENCY BRAKING
My brakes failed but I had them changed twice and that wasn’t the problem I had the cylinder change and still no brakes when I bought it it had some issues with the brakes going to the floor
2010 FORD FUSION
ID: 2093414SERVICE BRAKES
My brakes failed but I had them changed twice and that wasn’t the problem I had the cylinder change and still no brakes when I bought it it had some issues with the brakes going to the floor
2010 FORD FUSION
ID: 2092658POWER TRAIN
Driver side CV AXLE broke.
2010 FORD FUSION
ID: 2092571FUEL/PROPULSION SYSTEM
Unknown, I was driving in my wheel stop moving , it’s saying now power steering wheel, for my breaks, it keep saying check brake system
2010 FORD FUSION
ID: 2092570SERVICE BRAKES
Unknown, I was driving in my wheel stop moving , it’s saying now power steering wheel, for my breaks, it keep saying check brake system
2010 FORD FUSION
ID: 2092569STEERING
Unknown, I was driving in my wheel stop moving , it’s saying now power steering wheel, for my breaks, it keep saying check brake system
2010 FORD FUSION
ID: 2092248SERVICE BRAKES
I got a letter from ford awhile ago about my brakes. I brought it in then they stated I was fine. But you have to push my brake peddle all the way to the floor of the car to make my vehicle stop. I feel this is VERY UNSAFE for me and my family, And also others around me if something where to happen do to this problem. We have done multiply things to try to correct the problem with no luck.
2010 FORD FUSION
ID: 2090166STEERING
The contact owns a 2010 Ford Fusion. The contact stated that when the vehicle was started, the message of a failure with the power steering was displayed. The contact attempted to turn the steering wheel and was unable to turn the steering wheel. The vehicle was turned off and restarted and regained power steering assist. The vehicle was driven to a local dealer who diagnosed the vehicle and determined that the power steering assist module and the steering gears needed to be replaced. The vehicle was not repaired. The manufacturer was informed of the failure. The contact researched online and related the failure to a manufacturer’s recall for the failure. The failure mileage was 25,525.
2010 FORD FUSION
ID: 2086137STEERING
THE RACK - POWER STEERING FAILURE. DAUGHTER IS DRIVING THE CAR ON THE HIGHWAY AND NO POWER STEERING. 2 YEARS AGO HAD THE DEALER PUT ONE IN, 3 TIMES TO GET IT RIGHT. JUST FAILED NOW. WARNING LIGHTS ARE STEERING POWER ASSIST, AND I BELIEVE TRACTION CONTROL.
2010 FORD FUSION
ID: 2081280STEERING
The contact owns a 2010 Ford Fusion. The contact stated that while driving at various speeds, the vehicle lost power steering functionality, and the steering became stiff and was difficult to turn. The Electronic Power Steering (EPS) warning light was illuminated. The vehicle was taken to an independent mechanic, where the vehicle was diagnosed, and the contact was informed that the power steering was faulty and needed to be replaced. The contact stated that the failure had occurred three times. The vehicle was not repaired. The manufacturer was notified of the failure. The approximate failure mileage was 100,000.
2010 FORD FUSION
ID: 2079946UNKNOWN OR OTHER
Unknown
2010 FORD FUSION
ID: 2076610SERVICE BRAKES, HYDRAULIC
The contact owns a 2010 Ford Fusion. The contact stated that while her daughter was driving at an undisclosed speed, the brake pedal was depressed and went to the floorboard. The vehicle was taken to an independent mechanic, who replaced the ABS hydraulic control unit. The contact related the failure to NHTSA Campaign Number: 19V904000 (Service Brakes, Hydraulic); however, the VIN was not included in the recall. The manufacturer was made aware of the failure and advised the contact to file a complaint with the NHTSA Hotline. The failure mileage was 106,699.
2010 FORD FUSION
ID: 2076590SERVICE BRAKES
While merging onto the interstate the brakes abruptly failed. They didn't respond at all then responded weakly with several attempts. The mechanic said the abs failed.
2010 FORD FUSION
ID: 2075872STEERING
Power steering assist failure. Happening while not in motion.
2010 FORD FUSION
ID: 2070527POWER TRAIN
Car parking selector, cable, parking prowler/bearing or module sensor inside transmission when car is placed in park indicator indicate as in park but vehicle still motions forward as not in park and if key can be taking out an car shut off will not start because not in the park position an is tough trying to get back in park to start the vehicle but indicator indicates as car in the park position has happened 3-4 times once almost causing a accident in a shopping enter whiling trying to park in parking space an vehicle indicated as in the park position an turn off vehicle it continued to roll forward almost hitting the vehicle in front parking space
2010 FORD FUSION
ID: 2065592STEERING
Lost all Electric Power Steering.This need to be addressed ASP
2010 FORD FUSION
ID: 2065519SERVICE BRAKES
Brake pedal suddenly got "soft" - pedal has to be pressed further before braking begins and requires more pressure for the same amount of braking prior to the issue. Mechanic replaced brake pads and rotors and master cylinder. This did not correct the problem. Rear brake pads/rotors are wearing abnormally fast. Symptoms are consistent with malfunction of the hydraulic control unit for which there is a recall from Ford Motor Company. Although this vehicle model year (2010) is included in the recall period, my VIN number is not included. There are numerous anecdotal stories on search results for this problem where many Ford Fusion owners have the same problem and also are not included in the recall.
2010 FORD FUSION
ID: 2063051STEERING
The contact owns a 2010 Ford Fusion. The contact stated that upon starting the vehicle, the "Power Steering Assist Fault" message was displayed on the instrument panel. The contact stated that excessive force was needed to steer the vehicle. The vehicle was not taken to a dealer or independent mechanic to be diagnosed or repaired. The manufacturer was notified of the failure and referred the contact to the NHTSA Hotline to report the failure. The failure mileage was unknown.
2010 FORD FUSION
ID: 2062008SERVICE BRAKES, HYDRAULIC
The contact's friend owns a 2010 Ford Fusion. The contact stated that while his friend was driving 30 MPH and attempting to slow down, the brake pedal was depressed and went to the floorboard, and the vehicle failed to stop as intended. The driver was able to bring the vehicle to a complete stop by engaging the parking brake. The ABS warning light was illuminated. The vehicle was towed to the dealer, who diagnosed a failure with the hydraulic control unit. The vehicle was repaired. After investigating the failure, the contact related the failure to NHTSA Campaign Number: 19V904000 (Service Brake, Hydraulic); but the VIN was not included. The manufacturer was notified of the failure, a case was opened, and the contact was referred to the NHTSA Hotline for assistance. The failure mileage was 182,500.
2010 FORD FUSION
ID: 2061120STEERING
The contact owns a 2010 Ford Fusion. The contact stated that while the vehicle was parked and started, the message “Power Steering Assist Fault” was displayed. The contact stated that the steering wheel was locked. The vehicle was restarted, and the failure was self-corrected. The vehicle was taken to an independent mechanic where it was diagnosed that the power steering control module needed to be replaced or reprogrammed. The vehicle was not repaired. The manufacturer was notified of the failure. The failure mileage was 160,000.
2010 FORD FUSION
ID: 2059260WHEELS
My steering wheel keeps locking up after I had the air bag recall taken care of
2010 FORD FUSION
ID: 2059259STEERING
My steering wheel keeps locking up after I had the air bag recall taken care of
2010 FORD FUSION
ID: 2055028STEERING
The contact owns a 2010 Ford Fusion. The contact stated that while driving 25 MPH, the "Power Steering Fault" message was displayed, and the vehicle lost power steering functionality. The vehicle was not taken to a dealer or independent mechanic to be diagnosed or repaired. The manufacturer was not notified of the failure. The failure mileage was unknown.
2010 FORD FUSION
ID: 2053416SERVICE BRAKES, HYDRAULIC
The contact owns a 2010 Ford Fusion. The contact received notification of NHTSA Campaign Number: 19V904000 (Service Brakes, Hydraulic); however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The contact stated that while depressing the brake pedal, the brake pedal went to the floorboard causing the braking distance to be extended. There were no warning lights illuminated. The failure was intermittent. The vehicle was taken to the dealer, and it was determined that the brake module had failed and needed to be replaced. The dealer informed that the contact there were no trouble codes retrieved, and the repair was not covered under the recall. The vehicle had not been repaired. The manufacturer was made aware of the failure and opened a case for possible assistance with the cost of the repair. The failure mileage was 65,000. Parts distribution disconnect.