2008 FORD E-350

EQUIPMENT ADAPTIVE/MOBILITY

New England Wheels (New England) is recalling certain model year 2006-2014 Ford E-250, E-350, and 2015 Ford Transit vans equipped with certain model S2005, S2010, S5005, S5010, S5505, and S5510 wheelchair lifts by Ricon. The platform side plate of the affected wheelchair lifts may crack. Additionally, the lifts are equipped with folding link arms that may have pivot holes that are too big, allowing the bearings to move out of position.

Risk: If the platform side plates crack or the platform mounting fails from out-of-position bearings, the lift platform can separate from the lift and come to rest against the vehicle's lift door. When the vehicle's doors are opened, the platform may fall onto the lift operator, increasing their risk of injury.

EQUIPMENT ADAPTIVE/MOBILITY

New England Wheels is recalling certain model year 2006-2014 Ford E-250, and E-350 cargo vans modified to be equipped with certain model S2005, S2010, S5005, S5010, S5505, and S5510 wheelchair lifts built by the Ricon Corporation. The affected lifts are equipped with folding link arms that may have pivot holes that are too big, allowing the bearings to move out of position.

Risk: If the bearings move out of position, the stowed platform may have excessive movement resulting in failure of the platform mounting. This failure could cause the wheel chair lift platform to fall out of the vehicle when the doors are opened, increasing the risk of injury for the lift operator.

EQUIPMENT ADAPTIVE/MOBILITY

MobilityWorks (WMK Inc.) is recalling certain model year 2006-2014 Ford E-150, E-250, and E-350 vans modified by MobilityWorks to be equipped with certain model S2005, S2010, S5005, S5010, S5505, and S5510 wheelchair lifts manufactured by Ricon Corporation. The affected lifts are equipped with folding link arms that may have pivot holes that are too big, allowing the bearings to move out of position.

Risk: If the bearings move out of position, the stowed platform may have excessive movement resulting in failure of the platform mounting. This failure could cause the wheel chair lift platform to fall out of the vehicle when the doors are opened, increasing the risk of injury for the lift operator.

EQUIPMENT ADAPTIVE/MOBILITY

Mobility Specialists, Inc. (Mobility Specialists) is recalling certain model year 2006-2014 Ford E-250, and E-350 vehicles modified to be equipped with certain model S2005, S2010, S5005, S5010, S5505, and S5510 wheelchair lifts manufactured by Ricon Corporation. The platform side plate of the affected wheelchair lifts may crack. Additionally, the affected lifts are equipped with folding link arms that may have pivot holes that are too big, allowing the bearings to move out of position.

Risk: If the platform side plates crack, the lift platform can separate from the lift and come to rest against the vehicle's lift door. When the doors are opened, the platform may fall out, increasing the risk of injury to the lift operator. Additionally, if the bearings move out of position, the stowed platform may have excessive movement resulting in failure of the platform mounting. This failure could cause the wheel chair lift platform to fall out of the vehicle when the doors are opened, increasing the risk of injury for the lift operator.

EQUIPMENT ADAPTIVE/MOBILITY

Advanced Wheels of Technology, Inc. (Advanced Wheels) is recalling certain model year 2008-2010 Ford E-350 vehicles modified by Advanced Wheels and equipped with Braun NCL-2, and NVL-2 wheel chair lifts manufactured November 20, 2006, through September 10, 2010. Over time, and with frequent use, the roll stop latches on the outer barrier of the lifts in these vans may become bent or misaligned.

Risk: A wheelchair occupant may defeat or ride over the insufficiently latched roll stop. If this occurs when the lift platform is in an elevated position, the wheelchair's occupant could fall and sustain injury.

EQUIPMENT ADAPTIVE/MOBILITY

Cummings Mobility Conversion & Supply, Inc. (Cummings) is recalling various model year 1994-2011 Ford and Chevrolet vans equipped with Braun NCL-2, and NVL-2 wheel chair lifts manufactured November 20, 2006, through September 10, 2010. Over time, and with frequent use, the roll stop latches on the outer barrier of the lifts in these vans may become bent or misaligned.

Risk: A wheelchair occupant may defeat or ride over the insufficiently latched roll stop. If this occurs when the lift platform is in an elevated position, the wheelchair's occupant could fall and sustain injury.

EQUIPMENT ADAPTIVE/MOBILITY

Cummings Mobility Conversion & Supply (Cummings) is recalling certain model year 2006-2014 Ford E-150, E-250, E-350, Chevrolet Express, 2006-2008 Dodge Sprinter, and 2009-2014 Mercedes-Benz Sprinter, and 2013 Ford Transit Connect vehicles manufactured January 1, 2006, to October 8, 2014, equipped with certain model S2005, S2010, S5005, S5010, S5505, and S5510 wheelchair lifts manufactured by Ricon Corporation after January 1, 2006. The platform side plate of the affected wheelchair lifts may crack.

Risk: If the platform side plates crack, the lift platform can separate from the lift and come to rest against the vehicle's lift door. When the doors are opened, the platform may fall out, increasing the risk of injury to the lift operator.

EQUIPMENT ADAPTIVE/MOBILITY

New England Wheels (New England) is recalling certain model year 2006-2014 E-250, and E-350 vehicles modified by New England to be equipped with certain model S2005, S2010, S5005, S5010, S5505, and S5510 wheelchair lifts manufactured by Ricon Corporation. The platform side plate of the affected wheelchair lifts may crack.

Risk: If the platform side plates crack, the lift platform can separate from the lift and come to rest against the vehicle's lift door. When the doors are opened, the platform may fall out, increasing the risk of injury to the lift operator.

EQUIPMENT ADAPTIVE/MOBILITY

Elkhart Coach (Elkhart) is recalling certain model year 2006-2014 Ford E-350 and Ford E-450 vehicles manufactured January 1, 2006, to May 1, 2014 and equipped with certain model S2005, S2010, S5005, S5010, S5505, and S5510 wheelchair lifts manufactured by Ricon Corporation. The platform side plate of the affected wheelchair lifts may crack.

Risk: If the platform side plates crack, the lift platform can separate from the lift and come to rest against the vehicle's lift door. When the doors are opened, the platform may fall out, increasing the risk of injury to the lift operator.

EQUIPMENT

Mobility Works is recalling certain model year 2006-2012 Ford E-150, E-250 and E-350 vehicles manufactured August 2006 through August 2012. The vehicles are equipped with certain Ricon S series and K Series wheelchair lifts with an optional armored pendant cable. The armored cable may be positioned such that it does not clear the wheelchair lift.

Risk: If the cable does not clear the wheel chair lift it may contact the power lug and, if it does not have a nonconductive cover, or it has an improperly installed non-conductive cover, a short circuit may occur that could result in a fire.

EQUIPMENT:APPLIANCE:AIR CONDITIONER

BRAUN IS RECALLING CERTAIN MODEL YEAR 2005 THROUGH 2011 PARATRANSIT VANS BUILT ON FORD E-350 CHASSIS FROM APRIL 27, 2005, THROUGH JULY 29, 2010, EQUIPPED WITH CARRIER GENV EM-1 EVAPORATOR UNITS (EM-1) MANUFACTURED FROM JANUARY 1, 2006 THROUGH DECEMBER 2010, CONTAINING A DELPHI PACK-CON III FUSE HOLDER IN AN ALLIED MOTION MOTOR ASSEMBLY; EM-1 UNIT PART NUMBERS 77-62112-XX AND 77-62512-XX, STARTING WITH SERIAL NUMBER KNT90890232 TO SERIAL NUMBER NNE91230058. DUE TO TIME, TEMPERATURE, AND/OR VIBRATION, THE FUSE MAY LOOSEN IN THE FUSE HOLDER RESULTING IN HIGH RESISTANCE AND ARCING.

Risk: IF SUFFICIENT ARCING OCCURS, THE FUSE HOLDER MAY MELT, AND MAY BE ACCOMPANIED BY FLAME, SMOKE AND POTENTIAL FIRE.

FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY

FORD IS RECALLING CERTAIN REPLACEMENT FUEL TANKS THAT COULD BE INSTALLED INTO MODEL YEAR 2004 THROUGH 2008 E-150, E-250, AND E-350 VANS AND WAGONS. THE AFFECTED FUEL TANKS HAVE AN EXTRA OBDII SENSOR HOLE ON THE TOP OF THE TANK THAT MAY NOT BE PROPERLY SEALED AND MAY LEAK FUEL.

Risk: A FUEL LEAK IN THE PRESENCE OF AN IGNITION SOURCE MAY RESULT IN A FIRE.

SUSPENSION:REAR

FRONTLINE IS RECALLING CERTAIN MODEL YEAR 2006-2011 ELECTRONIC NEWS GATHERING (ENG) VEHICLES BUILT ON A FORD E-350 CHASSIS WITH AN AFTERMARKET REAR ANTI-SWAY BAR AND MANUFACTURED FROM OCTOBER 31, 2006, THROUGH JULY 12, 2011. THESE VEHICLES MAY BE SUSCEPTIBLE TO REAR HYDRAULIC BRAKE LINE DAMAGE. THE REAR ANTI-SWAY BAR FRAME MOUNTING BOLT THREADS MAY COME IN CONTACT WITH THE STEEL HYDRAULIC BRAKE LINE. IF METAL-TO-METAL ABRASION OCCURS, THE BRAKE LINE MAY EVENTUALLY RUPTURE AND CAUSE A LOSS OF HYDRAULIC SERVICE BRAKE PRESSURE.

Risk: IF A LOSS OF SERVICE BRAKE PRESSURE OCCURS, THE DRIVER MAY NOT BE ABLE TO CONTROL THE VEHICLE, INCREASING THE RISK OF A CRASH

FUEL SYSTEM, OTHER:FUEL INJECTION SYSTEM

ROUSH IS RECALLING CERTAIN AFTERMARKET ROUSH CLEAN TECH LIQUID PROPANE AUTOGAS FUEL SYSTEM KITS USED FOR INSTALLATION ON THE FOLLOWING VEHICLES: MODEL YEAR 2007 AND 2008 FORD E-350 (DUEL REAR WHEEL), MY 2009-2011 FORD E- 150, E-250, AND E-350, AND MY 2009-2011 FORD E-450 CUTAWAYS. THE FUEL RAILS INCLUDED IN THE KITS CONTAIN IMPROPERLY SEATED INJECTOR RETENTION CLIPS. THIS COULD RESULT IN LEAKAGE OF PROPANE AUTOGAS. THE PART NUMBERS OF THE AFFECTED KITS ARE: P07C2-176KIT-AB, P10C2-RCOMMKIT-AB, P10C2-R150KIT-AA, P10C2-R150KIT-AC, P10C2-R350KIT-AC, P11C2-R150KIT-AA, P11C2-R150KIT-AB, P11C2-R350KIT-AA, P11C2-R350KIT-AB, P10-SO-RKIT-BA, PBC2-RKIT158-AB, PBC2-RKIT176-AB, AND PBC2-RKITMB-AC.

Risk: A GAS LEAK IN THE PRESENCE OF AN IGNITION SOURCE CAN RESULT IN A FIRE.

EQUIPMENT ADAPTIVE/MOBILITY

MOBILITY TRANSPORTATION (MTS) IS RECALLING CERTAIN MODEL YEAR 2007 THROUGH 2009 CONVERSION VANS BUILT ON FORD E150, E250, AND E350 CHASSIS FROM SEPTEMBER 16, 2008 THROUGH APRIL 15, 2009 AND FITTED WITH CERTAIN RICON S SERIES AND K SERIES L-MODEL WHEELCHAIR LIFTS. DUE TO A PROBLEM IN THE SOFTWARE THAT CONTROLS THE LIFT'S "UP" FUNCTION, SHOULD THE "UP" BUTTON BE RELEASED BEFORE THE FLOOR LEVEL LIMIT SWITCH IS ACTIVATED, THE LIFT MAY CONTINUE ITS UPWARD TRAVEL AND MAY OVERRUN THE FLOOR LEVEL CUT OFF POINT.

Risk: WHEN THE PLATFORM OVERRUNS THE VEHICLE FLOOR LEVEL AND STOPS AT AN ANGLE FROM 15-20 DEGREES, IT IS POSSIBLE FOR A PERSON IN A WHEELCHAIR TO TIP OVER AND FOR SOMEONE STANDING ON THE PLATFORM TO FALL, POSSIBLY RESULTING IN INJURIES.

EQUIPMENT ADAPTIVE/MOBILITY

ELKHART COACH HAS NOTIFIED NHTSA ABOUT A DEFECT IN CERTAIN TRANSIT BUSES EQUIPPED WITH CERTAIN RICON S SERIES AND K SERIES L-MODEL WHEELCHAIR LIFTS, DUE TO A PROBLEM IN THE SOFTWARE THAT CONTROLS THE LIFT'S "UP" FUNCTION. IF THE "UP" SWITCH IS RELEASED BEFORE THE FLOOR LEVEL LIMIT SWITCH IS ACTIVATED, THE LIFT MAY CONTINUE ITS UPWARD TRAVEL FOR APPROXIMATELY 1 SECOND BEFORE STOPPING. THE CONTINUED UPWARD TRAVEL MAY OVERRUN THE FLOOR LEVEL CUT OFF POINT.

Risk: WHEN THE PLATFORM OVERRUNS THE VEHICLE FLOOR LEVEL AND STOPS AT AN ANGLE FROM 15-20 DEGREES, IT IS POSSIBLE FOR A PERSON IN A WHEELCHAIR TO TIP OVER AND FOR SOMEONE STANDING ON THE PLATFORM TO FALL, POSSIBLY RESULTING IN INJURIES.

EQUIPMENT ADAPTIVE/MOBILITY

MOBILITY TRANSPORTATION (MTS) IS RECALLING CERTAIN MODEL YEAR 2007 THROUGH 2009 CONVERSION VANS BUILT ON FORD E150, E250, AND E350 CHASSIS FROM SEPTEMBER 16, 2008 THROUGH APRIL 15, 2009 AND FITTED WITH RICON PUBLIC USE LIFTS. THE RESTRAINT BELT ON THESE LIFTS WAS DESIGNED TO PREVENT THE LIFT FROM MOVING, UNLESS THE TONGUE OF THE BELT IS FULLY ENGAGED AND LATCHED IN THE BUCKLE. RICON HAS DISCOVERED, HOWEVER, THAT IT IS POSSIBLE FOR THE OPERATOR TO INSERT THE BELT TONGUE INTO THE BUCKLE WITHOUT FULLY ENGAGING THE LATCHING MECHANISM. IN THIS CASE, THE RESTRAINT BELT WOULD APPEAR TO BE LATCHED, AND THE OPERATOR COULD RUN THE LIFT. IF THE RESTRAINT BELT TONGUE IS NOT FULLY ENGAGED INTO THE RESTRAINT BELT BUCKLE, AND LATCHED, THE LIFT MAY OPERATE WITH AN OCCUPANT ON THE PLATFORM.

Risk: THE USER OF THE LIFT COULD BE INJURED SHOULD THE LIFT MOVE WITHOUT THE RESTRAINT BELT PROPERLY BUCKLED.

EQUIPMENT ADAPTIVE/MOBILITY

MOBILITY WORKS IS RECALLING CERTAIN MODEL YEAR 2008 AND 2009 CONVERSION VANS BUILT ON FORD E150, E250, AND E350 CHASSIS AFTER NOVEMBER 2007 AND FITTED WITH RICON PUBLIC USE LIFTS. THE RESTRAINT BELT ON THESE LIFTS WAS DESIGNED TO PREVENT THE LIFT FROM MOVING, UNLESS THE TONGUE OF THE BELT IS FULLY ENGAGED AND LATCHED IN THE BUCKLE. RICON HAS DISCOVERED, HOWEVER, THAT IT IS POSSIBLE FOR THE OPERATOR TO INSERT THE BELT TONGUE INTO THE BUCKLE WITHOUT FULLY ENGAGING THE LATCHING MECHANISM. IN THIS CASE, THE RESTRAINT BELT WOULD APPEAR TO BE LATCHED, AND THE OPERATOR COULD RUN THE LIFT. IF THE RESTRAINT BELT TONGUE IS NOT FULLY ENGAGED INTO THE RESTRAINT BELT BUCKLE, AND LATCHED, THE LIFT MAY OPERATE WITH AN OCCUPANT ON THE PLATFORM.

Risk: THE USER OF THE LIFT COULD BE INJURED SHOULD THE LIFT MOVE WITHOUT THE RESTRAINT BELT PROPERLY BUCKLED.

EQUIPMENT ADAPTIVE/MOBILITY

COMM-TRANS IS RECALLING CERTAIN MODEL YEAR 2007-2009 ADA CONVERSION VANS BUILT ON FORD E-150, E-250, AND E-350 CHASSIS BETWEEN DECEMBER 7, 2007 AND DECEMBER 23, 2009 AND FITTED WITH CERTAIN RICON S SERIES AND K SERIES L-MODEL WHEELCHAIR LIFTS. DUE TO A PROBLEM IN THE SOFTWARE THAT CONTROLS THE LIFT'S "UP" FUNCTION, SHOULD THE "UP" BUTTON BE RELEASED BEFORE THE FLOOR LEVEL LIMIT SWITCH IS ACTIVATED, THE LIFT MAY CONTINUE ITS UPWARD TRAVEL AND MAY OVERRUN THE FLOOR LEVEL CUT OFF POINT.

Risk: WHEN THE PLATFORM OVERRUNS THE VEHICLE FLOOR LEVEL AND STOPS AT AN ANGLE FROM 15-20 DEGREES, IT IS POSSIBLE FOR A PERSON IN A WHEELCHAIR TO TIP OVER AND FOR SOMEONE STANDING ON THE PLATFORM TO FALL, POSSIBLY RESULTING IN INJURIES.

EQUIPMENT ADAPTIVE/MOBILITY

COMM-TRANS IS RECALLING CERTAIN MODEL YEAR 2007-2009 ADA CONVERSION VANS BUILT ON FORD E-150, E-250, AND E-350 CHASSIS BETWEEN DECEMBER 7, 2007 AND DECEMBER 23, 2009 AND FITTED WITH RICON PUBLIC USE LIFTS. THE RESTRAINT BELT ON THESE LIFTS WAS DESIGNED TO PREVENT THE LIFT FROM MOVING, UNLESS THE TONGUE OF THE BELT IS FULLY ENGAGED AND LATCHED IN THE BUCKLE. RICON HAS DISCOVERED, HOWEVER, THAT IT IS POSSIBLE FOR THE OPERATOR TO INSERT THE BELT TONGUE INTO THE BUCKLE WITHOUT FULLY ENGAGING THE LATCHING MECHANISM. IN THIS CASE, THE RESTRAINT BELT WOULD APPEAR TO BE LATCHED, AND THE OPERATOR COULD RUN THE LIFT. IF THE RESTRAINT BELT TONGUE IS NOT FULLY ENGAGED INTO THE RESTRAINT BELT BUCKLE, AND LATCHED, THE LIFT MAY OPERATE WITH AN OCCUPANT ON THE PLATFORM.

Risk: THE USER OF THE LIFT COULD BE INJURED SHOULD THE LIFT MOVE WITHOUT THE RESTRAINT BELT PROPERLY BUCKLED.

EQUIPMENT ADAPTIVE/MOBILITY

ELKHART COACH HAS NOTIFIED NHTSA OF A DEFECT IN CERTAIN TRANSIT BUSES FITTED WITH RICON PUBLIC USE LIFTS. THE RESTRAINT BELT ON THESE LIFTS WAS DESIGNED TO PREVENT THE LIFT FROM MOVING, UNLESS THE TONGUE OF THE BELT IS FULLY ENGAGED AND LATCHED IN THE BUCKLE. RICON HAS DISCOVERED, HOWEVER, THAT IT IS POSSIBLE FOR THE OPERATOR TO INSERT THE BELT TONGUE INTO THE BUCKLE WITHOUT FULLY ENGAGING THE LATCHING MECHANISM. IN THIS CASE, THE RESTRAINT BELT WOULD APPEAR TO BE LATCHED, AND THE OPERATOR COULD RUN THE LIFT. IF THE RESTRAINT BELT TONGUE IS NOT FULLY ENGAGED INTO THE RESTRAINT BELT BUCKLE, AND LATCHED, THE LIFT MAY OPERATE WITH AN OCCUPANT ON THE PLATFORM.

Risk: THE USER OF THE LIFT COULD BE INJURED SHOULD THE LIFT MOVE WITHOUT THE RESTRAINT BELT PROPERLY BUCKLED.

ENGINE

When there is any dew or moisture of any kind on the road the truck wont stop without the front breaks locking up and wont stop, Also the spark plugs have blown out of the motor prior to this it starts to develop A misfire, And The rear sustention is so weak the rear of the truck drags the ground when there is A low spot or dup in the road and has worn the metal off the bottom of the tow hitch making it unsafe and useless