2019 FCCC MT45 Complaints and Recall Information

The 2019 FCCC MT45 has zero complaints and eight recalls filed with NHTSA. Owners commonly report no documented issues in formal complaints. The recalls primarily address mechanical and safety components related to braking and steering systems.

The vehicle has eight recalls affecting brake, steering, and suspension systems. These recalls involve potential risks of brake light failure and loss of vehicle control due to loose or defective components. Repairs include inspections and replacements performed free of charge by dealers.

• Brake pedal clevis pin clip. Recall 19V371000 affects 9,702 vehicles. The clip may rub or bend on the throttle pedal and detach, leading to brake light failure. Loss of brake lights increases crash risk by misleading other drivers. Dealers inspect and correct the clevis pin clearance at no cost.
• Brake light failure risk. Also part of recall 19V371000, failure of the clevis pin clip can cause the brake pedal to detach, raising crash risk. Owners received interim notifications before the recall began August 28, 2019.
• Loose steering bolts. Recall 18V913000 affects 501 vehicles including the MT45 chassis. Loose tie rod arm bolts can cause separation of the tie rod arm resulting in loss of vehicle control and increased crash risk.
• Tie rod arm bolt inspection. Dealers inspect and tighten steering and tie rod arm bolts under recall 18V913000, installing new fasteners if necessary. The recall started February 9, 2019.
• Steering linkage defects. Included in recall 18V913000, defective or loose steering components affect handling and safety. Repairs involve thorough inspections and necessary corrections at no charge.
• Control arm issues. Front control arms may be affected, causing alignment or handling problems under recall 18V913000. Dealer inspections ensure proper fastener torque and replace hardware if needed.

Owners facing repeated repairs or unresolved safety recall issues may want to consider their rights under state lemon laws.