DODGE SPRINTER 3500

AIR BAGS:FRONTAL:PASSENGER SIDE:INFLATOR MODULE

Daimler Vans USA, LLC (DVUSA) is recalling certain 2007-2009 Freightliner and Dodge Sprinter 2500 and 3500 vehicles. These vehicles are equipped with certain air bag inflators assembled into the passenger frontal air bag modules used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the passenger frontal air bag, these inflators may rupture due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling.

Risk: An inflator rupture may result in metal fragments striking the vehicle occupants resulting in serious injury or death.

AIR BAGS:FRONTAL:DRIVER SIDE:INFLATOR MODULE

Daimler Vans USA, LLC (Daimler Vans) is recalling certain model year 2007-2009 Dodge Sprinter 2500 and 3500 vehicles manufactured July 1, 2006, to July 31, 2008, 2007-2014 Freightliner Sprinter 2500 and 3500 vehicles manufactured July 1, 2006, to July 1, 2014, and 2010-2014 Mercedes Benz Sprinter 2500 and 3500 vehicles manufactured July 1, 2010, to July 1, 2014. Upon deployment of the driver's frontal air bag, excessive internal pressure may cause the inflator to rupture.

Risk: In the event of a crash necessitating deployment of the driver's frontal air bag, the inflator could rupture with metal fragments striking the vehicle occupants potentially resulting in serious injury or death.

SERVICE BRAKES, HYDRAULIC

Daimler Vans USA, LLC (DVUSA) is recalling certain model year 2003-2006 Dodge and Freightliner Sprinter 2500 and 3500 vans manufactured June 30, 2003, to August 31, 2006. The instrument cluster on the affected vehicles fails to illuminate the BRAKE warning lamp in the instrument cluster during the vehicle start up bulb-function check. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 105, "Hydraulic and Electric Brake Systems."

Risk: Without the BRAKE lamp illuminating during the vehicle start up bulb-function check, the driver has no confirmation that the lamp is working and therefore may not know whether or not the lamp will illuminate if the brake fluid level is low. If the operator is unaware that the vehicle has low brake fluid, there would be an increased risk of a crash.

EQUIPMENT ADAPTIVE/MOBILITY

Cummings Mobility Conversion & Supply (Cummings) is recalling certain model year 2006-2014 Ford E-150, E-250, E-350, Chevrolet Express, 2006-2008 Dodge Sprinter, and 2009-2014 Mercedes-Benz Sprinter, and 2013 Ford Transit Connect vehicles manufactured January 1, 2006, to October 8, 2014, equipped with certain model S2005, S2010, S5005, S5010, S5505, and S5510 wheelchair lifts manufactured by Ricon Corporation after January 1, 2006. The platform side plate of the affected wheelchair lifts may crack.

Risk: If the platform side plates crack, the lift platform can separate from the lift and come to rest against the vehicle's lift door. When the doors are opened, the platform may fall out, increasing the risk of injury to the lift operator.

ENGINE AND ENGINE COOLING:EXHAUST SYSTEM

MERCEDES-BENZ USA (MBUSA) IS RECALLING CERTAIN MODEL YEAR 2002- 2003 SPRINTER 2500 AND 3500 VANS SOLD AS DODGE AND FREIGHTLINER VEHICLES. THE INTAKE MANIFOLDS MAY HAVE CORRODED. A CHEMICAL REACTION INVOLVING SULFUR IN THE DIESEL FUEL THAT TAKES PLACE UNDER CERTAIN CONDITIONS CAN LEAD TO THE FORMATION OF SULFURIC ACID IN THE EXHAUST CHANNEL OF THE INTAKE MANIFOLD.

Risk: INTAKE MANIFOLD CORROSION MAY LEAD TO AN EXHAUST GAS LEAK, DAMAGE TO THE FUEL RETURN LINE WHICH COULD CAUSE A FUEL LEAK, AND HEAT DAMAGE TO THE INSULATION AT THE FIRE WALL. FUEL LEAKAGE, IN THE PRESENCE OF AN IGNITION SOURCE, COULD RESULT IN A FIRE.

SEAT BELTS

MERCEDES-BENZ IS RECALLING CERTAIN MODEL YEAR 2008-2011 2500 AND 3500 SPRINTER VEHICLES EQUIPPED WITH AN OPTIONAL THREE-SEAT BENCH IN THE PASSENGER COMPARTMENT. THE SEAT BENCHES IN THE SECOND SEATING ROW MAY HAVE BEEN EQUIPPED WITH SAFETY BELTS THAT DO NOT MEET THE MINIMUM REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD 208, "OCCUPANT PROTECTION IN INTERIOR IMPACT," AND MOTOR VEHICLE SAFETY STANDARD 209, "SEAT BELT ASSEMBLIES." FIRST, THOSE SAFETY BELTS MAY NOT LOCK AS REQUIRED. SECOND, THE ASSEMBLY LOOP MAY NOT PERFORM TO MINIMUM FORCE REQUIREMENTS.

Risk: IN THE EVENT OF A CRASH, THE SAFETY BELTS IN THESE VEHICLES MAY NOT PERFORM AS REQUIRED SUCH THAT A SEAT OCCUPANT MAY NOT BE PROPERLY RESTRAINED, INCREASING THE RISK OF INJURY OR DEATH IN THE EVENT OF A CRASH.

ELECTRICAL SYSTEM

We've had multiple issues with starting the vehicle. After number attempts to eradicate the issue, I Google searched the problems and found that the y connect harness from battery to alternator and starter had been remanufactured for improvement 3 times. I'm uncertain why this part did not have a recall for my vehicle. Mercedes manufacturer for our motor should be responsible for this issue since there have been so many reported issues with this part. Can you please evaluate the complaint and advise.