2017 BMW X5

ENGINE AND ENGINE COOLING:COOLING SYSTEM:PUMP

BMW of North America, LLC. (BMW) is recalling certain 2012-2015 X1 sDrive28i, X1 xDrive28i, 2012-2016 Z4 sDrive28i, 528i, 528i xDrive, 328i, 328xi, 2016-2018 X5 xdrive 40e, 2014-2016 228i, 228xi, 428i, 428i xDrive, 328xi Gran Turismo, 2013-2017 X3 sDrive28i, X3 xDrive28i, 2015-2018 X4 xDrive28i, 2015-2016 428xi vehicles. An improperly sealed electrical connector on the water pump may be exposed to water and short circuit.

Risk: An electrical short increases the risk of a fire.

FUEL SYSTEM, DIESEL:DELIVERY:FUEL PUMP

BMW of North America, LLC (BMW) is recalling certain 2014-2018 328d, 328d xDrive, X5 xDrive35d, 2014-2016 535d, 535d xDrive, 2015 740Ld xDrive, and 2015-2017 X3 xDrive28d vehicles. The high-pressure fuel pump may fail.

Risk: Fuel pump failure can cause an engine stall while driving, increasing the risk of a crash.

FUEL SYSTEM, DIESEL

BMW of North America, LLC (BMW) is recalling certain 2013-2018 328d, 328d xDrive, 2014-2018 328d Sports Wagon, 328d xDrive Sports Wagon, 2014-2016 535d, 535d xDrive, 2015 740Ld xDrive, 2015-2017 X3 xDrive28d SAV, and 2014-2017 X5 xDrive35d SAV diesel vehicles equipped with an Exhaust Gas Recirculation (EGR) module with an integrated cooler. The EGR cooler may leak internally, causing coolant to mix with diesel engine soot, which could result in smoldering particles and a melting intake manifold.

Risk: A melting intake manifold increases the risk of a fire.

ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:GAS RECIRCULATION VALVE (EGR VALVE)

BMW of North America, LLC (BMW) is recalling certain 2013-2018 BMW 328d and 328d xDrive, 2014-2018 328d Sports Wagon and 328d xDrive Sports Wagon, 2014-2016 535d and 535d xDrive, 2015 740Ld xDrive, 2015-2017 X3 xDrive28d SAV and 2014-2017 X5 xDrive35d SAV vehicles equipped with an Exhaust Gas Recirculation (EGR) module with an integrated cooler. If the EGR cooler leaks internally, the coolant can mix with diesel engine soot. The high EGR temperatures may result in these particles possibly smoldering and melting the intake manifold.

Risk: The melting intake manifold can increase the risk of a fire.

AIR BAGS:FRONTAL:PASSENGER SIDE:INFLATOR MODULE

BMW of North America, Inc. (BMW) is recalling certain 2017 X5 sDrive35i, X5 xDrive35i, X5 xDrive50i, X5 xDrive35d, and X5 xDrive40e vehicles. These vehicles are equipped with passenger frontal air bag modules using certain air bag inflators that may not vent properly in the event of a crash necessitating deployment of the passenger frontal air bag.

Risk: If the inflator cannot vent properly, the inflator may rupture, resulting in metal fragments striking the vehicle occupants and causing serious injury or death.

FUEL/PROPULSION SYSTEM

No remedy for recall and no plan

ELECTRICAL SYSTEM

No remedy for recall and no plan

ENGINE

No remedy for recall and no plan

ELECTRICAL SYSTEM

The contact owns a 2017 BMW X5. The contact stated while driving at an undisclosed speed, the engine overheated with several unknown warning lights illuminated. In addition, the vehicle lost electrical functions. The vehicle was towed to an independent mechanic where it was diagnosed with a failed coolant pump. The contact was informed that the coolant pump needed to be replaced. The vehicle was not repaired. The manufacturer was made aware of the failure but provided no assistance. The contact referenced NHTSA Campaign Number: 24V608000 (Engine and Engine Cooling, Electrical System); however, the VIN was not associated with the recall. The contact was advised to contact the NHTSA Hotline to report the failure. The failure mileage was approximately 78,000.

ENGINE AND ENGINE COOLING

The contact owns a 2017 BMW X5. The contact stated while driving at an undisclosed speed, the engine overheated with several unknown warning lights illuminated. In addition, the vehicle lost electrical functions. The vehicle was towed to an independent mechanic where it was diagnosed with a failed coolant pump. The contact was informed that the coolant pump needed to be replaced. The vehicle was not repaired. The manufacturer was made aware of the failure but provided no assistance. The contact referenced NHTSA Campaign Number: 24V608000 (Engine and Engine Cooling, Electrical System); however, the VIN was not associated with the recall. The contact was advised to contact the NHTSA Hotline to report the failure. The failure mileage was approximately 78,000.

ELECTRICAL SYSTEM

Battery overheated and melted plastic cover

ENGINE

The contact owns a 2017 BMW X5. The contact stated that the oil drain plug and the oil pan do not have adequate space after being stripped. The metal in the oil pan was very thin. There was oil located on the engine and the ground. The contact was losing a quart of oil every 600 miles driven. The contact added oil to the vehicle as needed. There were no warning lights illuminated. The vehicle was taken to the local dealer where it was diagnosed that the oil pan needed to be replaced. The vehicle was not repaired. The manufacturer was not notified about the failure. The failure mileage was approximately 30,000.

FUEL/PROPULSION SYSTEM

I am writing to formally document two significant incidents involving the complete failure of the high-pressure fuel system in my BMW vehicle, VIN [XXX] , which have raised concerns about the reliability of this component. On [XXX], while navigating city street traffic, my vehicle, with 57,376 miles, experienced a total loss of power, resulting in the vehicle stalling in the left lane. The vehicle was towed to an authorized BMW dealership, where the entire high-pressure fuel system was diagnosed and replaced under warranty. As the second owner of this vehicle, I acquired it from my neighbor, the original owner. Upon reviewing the complete service records provided by the previous owner, I discovered that a nearly identical issue occurred at 39,066 miles. The service documentation states, "Client reports that while driving, the vehicle lost power and stalled." At that time, the high-pressure fuel system was also fully replaced. Further investigation revealed that BMW issued a safety recall notice between these two incidents, acknowledging potential failures in the high-pressure fuel pumps. However, the recall indicated that no remedy was available at the time. I've attached all the service records for both incidents and BMW North America's letter. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

UNKNOWN OR OTHER

I am writing to express my concern regarding the recent recall identified under NHTSA Campaign ID: 24V608000 related to BMW vehicles. I own a 2017 BMW X5 with the VIN number [XXX]. Although my vehicle is currently not listed under this recall, it is exhibiting the exact symptoms described, including engine overheating with coolant pump failure warnings. Given the similarities, I am concerned about the safety of my vehicle and would like to know what steps I should take next. I respectfully request that my case be reviewed, and I would appreciate any guidance or assistance you can offer to help ensure my vehicle’s safety. Thank you for your attention to this matter. I look forward to your response. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

SERVICE BRAKES, HYDRAULIC

The contact owns a 2017 BMW X5. The contact stated that while driving at an undisclosed speed, the brake pedal was heavily depressed for the brakes to engage. No warning light was illuminated. The vehicle was taken to a dealer to be diagnosed; however, the cause for the failure was not yet determined. The dealer informed the contact that there was air in the brake lines and that the air needed to be bled from the brake lines to repair the vehicle. The vehicle was repaired; however, the failure persisted. The contact researched and was made aware of an unknown recall; however, the VIN was not included. The manufacturer was notified of the failure and referred the contact to the NHTSA Hotline to report the failure. The failure mileage was approximately 60,000.