📧 info@texaslemonlaw.com 📞 +1 866 777 5045
Free Consultation Available

2015 BMW 428I

View all complaints and recalls for this specific model year.

2015 BMW 428I Summary

2015

Model Year

46

Total Complaints

5

Total Recalls

747823

Vehicles Affected

Recalls

2015 BMW 428I

720796 vehicles affected

24V608000

ENGINE AND ENGINE COOLING:COOLING SYSTEM:PUMP

BMW of North America, LLC. (BMW) is recalling certain 2012-2015 X1 sDrive28i, X1 xDrive28i, 2012-2016 Z4 sDrive28i, 528i, 528i xDrive, 328i, 328xi, 2016-2018 X5 xdrive 40e, 2014-2016 228i, 228xi, 428i, 428i xDrive, 328xi Gran Turismo, 2013-2017 X3 sDrive28i, X3 xDrive28i, 2015-2018 X4 xDrive28i, 2015-2016 428xi vehicles. An improperly sealed electrical connector on the water pump may be exposed to water and short circuit.

Risk: An electrical short increases the risk of a fire.

2015 BMW 428I

1145 vehicles affected

24V527000

AIR BAGS:FRONTAL:DRIVER SIDE:INFLATOR MODULE

BMW of North America, LLC (BMW) is recalling certain 2015 6 Series Gran Coupe, 2014 5 Series Gran Turismo, 2014 5 Series Sedan, 2015 6 Series Convertible, 2015 6 Series Coupe, 2014 X5, 2013-2014 X3, 2014-2015 3 Series Sedan, 2014 4 Series Coupe, 2014 4 Series Convertible, 2014 3 Series Gran Turismo, and 2015 4 Series Gran Coupe vehicles. Please see the recall report for the complete list of models. The driver's air bag inflator may explode during deployment, due to a manufacturing defect.

Risk: An inflator explosion may result in sharp metal fragments striking the driver or other occupants, increasing the risk of injury or death.

2015 BMW 428I

5761 vehicles affected

24V288000

AIR BAGS:SIDE/WINDOW

BMW of North America, LLC (BMW) is recalling certain 2014-2015 2 Series Coupe (228i, 228i xDrive, M235i), 3 Series Sedan (320i, 320i xDrive, 328i, 328i xDrive, 335i, 335i xDrive, M3, 328d, 328d xDrive), 4 Series Coupe (428i, 428i xDrive, 435i, 435i xDrive, M4), and 2015 4 Series Gran Coupe (428i, 428i xDrive, 435i, 435i xDrive) vehicles. The head air bag inflator may fail at the weld joint, which can cause gas to leak from the inflator or result in an inflator rupture.

Risk: An inflator that ruptures may cause sharp metal fragments to enter or exit the vehicle, increasing the risk of injury. Additionally, an inflator that leaks gas may only partially inflate during a crash, increasing the risk of injury.

2015 BMW 428I

2067 vehicles affected

15V148000

AIR BAGS

BMW of North America, LLC (BMW) is recalling certain model year 2015 428i Convertible, 428i xDrive Convertible, 435i Convertible, and 435i xDrive Convertible vehicles manufactured October 22, 2014, to February 27, 2015. Due to a programming error, the driver's front air bag deployment timing may be incorrect. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) No. 208, "Occupant Crash Protection."

Risk: If the driver's front air bag deployment timing is incorrect, there is an increased risk of personal injury in the event of a vehicle crash.

2015 BMW 428I

18054 vehicles affected

15V189000

FUEL SYSTEM, GASOLINE:DELIVERY:FUEL PUMP

BMW of North America LLC (BMW) is recalling certain model year 2014 228i Coupe, M235i Coupe, 320i, 320xi, 328i, 328xi, 335i, 335xi, ActiveHybrid 3, 328xi Sports Wagon, 428i Coupe, 428xi Coupe, 435i Coupe, 435xi Coupe, 428i Convertible, 428xi Convertible, 435i Convertible, 328xi Gran Turismo, 335xi Gran Turismo, and 2015 428i Gran Coupe, 428xi Gran Coupe, and 435i Gran Coupe vehicles. Improper nickel plating of components within the fuel pump may result in the fuel pump failing.

Risk: If the fuel pump fails, the vehicle may stall without warning, increasing the risk of a crash.

Complaints

2015 BMW 428I

ID: 2121269

ELECTRICAL SYSTEM

The contact owns a 2015 BMW 428I. The contact received notification of NHTSA Campaign Number: 24V608000 (Engine and Engine Cooling, Electrical System). The contact called the local dealer, who confirmed that recall parts were not yet available and advised the contact to wait for another notification to arrive when parts become available. The vehicle was not diagnosed or repaired. The manufacturer was not contacted about the issue. The contact had not experienced a failure.

2015 BMW 428I

ID: 2121268

ENGINE AND ENGINE COOLING

The contact owns a 2015 BMW 428I. The contact received notification of NHTSA Campaign Number: 24V608000 (Engine and Engine Cooling, Electrical System). The contact called the local dealer, who confirmed that recall parts were not yet available and advised the contact to wait for another notification to arrive when parts become available. The vehicle was not diagnosed or repaired. The manufacturer was not contacted about the issue. The contact had not experienced a failure.

2015 BMW 428I

ID: 2118812

ELECTRICAL SYSTEM

The contact owns a 2015 BMW 428I. The contact received notification of NHTSA Campaign Number: 24V608000 (Engine and Engine Cooling, Electrical System); however, the part to do the recall repair was not yet available. The contact stated that while driving 20 MPH, the check engine warning light illuminated, and the messages "Engine Overheated" and "Please Pull Over" were displayed on the instrument panel. The contact replaced the water pump and the thermostat; however, the failure persisted, and the vehicle was taken to an independent mechanic to be diagnosed and the contact was informed that the water pump had failed and needed to be replaced. The water pump and thermostat were replaced; however, the failure persisted, and the engine kept overheating. The vehicle was taken back to the independent mechanic. The water pump and thermostat were replaced. The independent mechanic checked the electrical system. However, no cause for the failure was found. The contact stated that the failure persisted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the failure. The failure mileage was unknown.

2015 BMW 428I

ID: 2118811

ENGINE AND ENGINE COOLING

The contact owns a 2015 BMW 428I. The contact received notification of NHTSA Campaign Number: 24V608000 (Engine and Engine Cooling, Electrical System); however, the part to do the recall repair was not yet available. The contact stated that while driving 20 MPH, the check engine warning light illuminated, and the messages "Engine Overheated" and "Please Pull Over" were displayed on the instrument panel. The contact replaced the water pump and the thermostat; however, the failure persisted, and the vehicle was taken to an independent mechanic to be diagnosed and the contact was informed that the water pump had failed and needed to be replaced. The water pump and thermostat were replaced; however, the failure persisted, and the engine kept overheating. The vehicle was taken back to the independent mechanic. The water pump and thermostat were replaced. The independent mechanic checked the electrical system. However, no cause for the failure was found. The contact stated that the failure persisted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the failure. The failure mileage was unknown.

2015 BMW 428I

ID: 2114708

ENGINE AND ENGINE COOLING

The contact owns a 2015 BMW 428i. The contact received notification of NHTSA Campaign Number: 24V608000(Engine and Engine Cooling, Electrical System); however, the part to do the recall repair was not yet available. The contact stated while operating the vehicle, the contact noticed smoke coming from the engine compartment. An unknown local dealer was contacted. The vehicle was not diagnosed or repaired. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the failure. The failure mileage was 63,000. VIN tool confirms parts not available.

2015 BMW 428I

ID: 2110661

ELECTRICAL SYSTEM

Recall #24V-609. Recall was issued in October 2024. My wife drives this car....BMW has no update. Need it repaired ASAP! Please inquire. Thank you, [XXX] [XXX] [XXX] INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

2015 BMW 428I

ID: 2106965

ELECTRICAL SYSTEM

The contact owns a 2015 BMW 428I. The contact received notification of NHTSA Campaign Number: 24V608000 (Engine and Engine Cooling, Electrical System); however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.

2015 BMW 428I

ID: 2106964

ENGINE AND ENGINE COOLING

The contact owns a 2015 BMW 428I. The contact received notification of NHTSA Campaign Number: 24V608000 (Engine and Engine Cooling, Electrical System); however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.

2015 BMW 428I

ID: 2099162

ELECTRICAL SYSTEM

The contact owns a 2015 BMW 428I. The contact received notification of NHTSA Campaign Number: 24V608000 (ENGINE AND ENGINE COOLING, ELECTRICAL SYSTEM); however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.

2015 BMW 428I

ID: 2099161

ENGINE AND ENGINE COOLING

The contact owns a 2015 BMW 428I. The contact received notification of NHTSA Campaign Number: 24V608000 (ENGINE AND ENGINE COOLING, ELECTRICAL SYSTEM); however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.

2015 BMW 428I

ID: 2095179

ELECTRICAL SYSTEM

The contact owns a 2015 BMW 428I. The contact stated while driving at an undisclosed speed, the engine overheated and the vehicle started shaking with the drivetrain malfunction message displayed. The contact received notification of NHTSA Campaign Number: 24V608000 (Engine and Engine Cooling, Electrical System); however, the part to do the recall repair was unavailable. The dealer was contacted and confirmed that parts were not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the failure but was unable to confirm when parts would become available. The failure mileage was approximately 93,000. VIN tool confirms parts not available.

2015 BMW 428I

ID: 2095178

ENGINE AND ENGINE COOLING

The contact owns a 2015 BMW 428I. The contact stated while driving at an undisclosed speed, the engine overheated and the vehicle started shaking with the drivetrain malfunction message displayed. The contact received notification of NHTSA Campaign Number: 24V608000 (Engine and Engine Cooling, Electrical System); however, the part to do the recall repair was unavailable. The dealer was contacted and confirmed that parts were not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the failure but was unable to confirm when parts would become available. The failure mileage was approximately 93,000. VIN tool confirms parts not available.

2015 BMW 428I

ID: 2095012

ELECTRICAL SYSTEM

The contact owns a 2015 BMW 428I. The contact received notification of NHTSA Campaign Number: 24V608000 (ENGINE AND ENGINE COOLING, ELECTRICAL SYSTEM); however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.

2015 BMW 428I

ID: 2095011

ENGINE AND ENGINE COOLING

The contact owns a 2015 BMW 428I. The contact received notification of NHTSA Campaign Number: 24V608000 (ENGINE AND ENGINE COOLING, ELECTRICAL SYSTEM); however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.

2015 BMW 428I

ID: 2093274

AIR BAGS

A warning message comes on saying the front passenger air bag sensor is defective. I checked with the BMW dealership and with the used car company I bought the car and "bumper to bumper" warranty. The used car company confirmed the car has a bad sensor but I have to pay $1,100. BMW has had several recalls involving sensors in other models and even problems with the 2015 428i convertible. My car had less than 50,000 miles when the fault 1st popped up July 2024. I believe this should be recallled.

2015 BMW 428I

ID: 2089416

ELECTRICAL SYSTEM

The contact owns a 2015 BMW 428I. The contact received notification of NHTSA Campaign Number: 24V608000 (Engine and Engine Cooling, Electrical System); however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The contact stated while driving approximately 30-40 MPH, there was smoke coming from underneath the hood of the vehicle. The dealer was not contacted. The manufacturer was made aware of the issue. The failure mileage was 151,940. VIN tool confirms parts not available.

2015 BMW 428I

ID: 2089415

ENGINE AND ENGINE COOLING

The contact owns a 2015 BMW 428I. The contact received notification of NHTSA Campaign Number: 24V608000 (Engine and Engine Cooling, Electrical System); however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The contact stated while driving approximately 30-40 MPH, there was smoke coming from underneath the hood of the vehicle. The dealer was not contacted. The manufacturer was made aware of the issue. The failure mileage was 151,940. VIN tool confirms parts not available.

2015 BMW 428I

ID: 2089340

ELECTRICAL SYSTEM

The manufacturer has failed or is unable to remedy this safety recall for my vehicle in a timely manner. Issue: 1 open recall since Aug 13, 2024 for: ENGINE COOLANT PUMP: The electrical connector of the engine coolant pump could become damaged. Small drops of liquid from the positive crankcase ventilation (PCV) system could drip down onto the electrical connector of the pump.

2015 BMW 428I

ID: 2088787

ELECTRICAL SYSTEM

The contact owns a 2015 BMW 428I. The contact received notification of NHTSA Campaign Number: 24V608000 (Engine and Engine Cooling, Electrical System); however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.

2015 BMW 428I

ID: 2088786

ENGINE AND ENGINE COOLING

The contact owns a 2015 BMW 428I. The contact received notification of NHTSA Campaign Number: 24V608000 (Engine and Engine Cooling, Electrical System); however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.

2015 BMW 428I

ID: 2086254

ELECTRICAL SYSTEM

The contact owns a 2015 BMW 428I. The contact received notification of NHTSA Campaign Number: 24V608000 (ENGINE AND ENGINE COOLING, ELECTRICAL SYSTEM); however, the part to do the recall repair was unavailable. The local dealer was contacted, and it was confirmed that the part was not available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact stated while driving at an undisclosed speed, there was smoke coming from the engine compartment into the cabin of the vehicle. The cause of the failure was not determined, and the vehicle was not yet repaired. The failure mileage was 60,000. VIN tool confirms parts not available.

2015 BMW 428I

ID: 2086253

ENGINE AND ENGINE COOLING

The contact owns a 2015 BMW 428I. The contact received notification of NHTSA Campaign Number: 24V608000 (ENGINE AND ENGINE COOLING, ELECTRICAL SYSTEM); however, the part to do the recall repair was unavailable. The local dealer was contacted, and it was confirmed that the part was not available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact stated while driving at an undisclosed speed, there was smoke coming from the engine compartment into the cabin of the vehicle. The cause of the failure was not determined, and the vehicle was not yet repaired. The failure mileage was 60,000. VIN tool confirms parts not available.

2015 BMW 428I

ID: 2079599

UNKNOWN OR OTHER

The contact owns a 2015 BMW 428I. The contact received notification of NHTSA Campaign Number: 24V608000 (Engine and Engine Cooling, Electrical System); however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.

2015 BMW 428I

ID: 2079598

ELECTRICAL SYSTEM

The contact owns a 2015 BMW 428I. The contact received notification of NHTSA Campaign Number: 24V608000 (Engine and Engine Cooling, Electrical System); however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.

2015 BMW 428I

ID: 2079597

ENGINE

The contact owns a 2015 BMW 428I. The contact received notification of NHTSA Campaign Number: 24V608000 (Engine and Engine Cooling, Electrical System); however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.

2015 BMW 428I

ID: 2076476

ELECTRICAL SYSTEM

The contact owns a 2015 BMW 428I. The contact received notification of NHTSA Campaign Number: 24V608000 (Engine and Engine Cooling, Electrical System); however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.

2015 BMW 428I

ID: 2076475

ENGINE AND ENGINE COOLING

The contact owns a 2015 BMW 428I. The contact received notification of NHTSA Campaign Number: 24V608000 (Engine and Engine Cooling, Electrical System); however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.

2015 BMW 428I

ID: 2071190

ELECTRICAL SYSTEM

The contact owns a 2015 BMW 428I. The contact stated while driving at approximately 15-20 MPH, the message “Do not Drive” was displayed. The vehicle sat overnight; however, upon starting the vehicle the next day, the messages “Do not Drive” and “Add Coolant” were displayed. There were no visible leaks found. The contact added additional BMW coolant. The contact received notification of NHTSA Campaign Number: 24V608000 (Engine and Engine Cooling, Electrical System); however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact scheduled an appointment with the dealer. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The approximate failure mileage was 138,000. VIN tool confirms parts not available.

2015 BMW 428I

ID: 2071189

ENGINE AND ENGINE COOLING

The contact owns a 2015 BMW 428I. The contact stated while driving at approximately 15-20 MPH, the message “Do not Drive” was displayed. The vehicle sat overnight; however, upon starting the vehicle the next day, the messages “Do not Drive” and “Add Coolant” were displayed. There were no visible leaks found. The contact added additional BMW coolant. The contact received notification of NHTSA Campaign Number: 24V608000 (Engine and Engine Cooling, Electrical System); however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact scheduled an appointment with the dealer. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The approximate failure mileage was 138,000. VIN tool confirms parts not available.

2015 BMW 428I

ID: 2070476

ELECTRICAL SYSTEM

The contact owns a 2015 BMW 428I. The contact received notification of NHTSA Campaign Number: 24V608000 (Engine and Engine Cooling, Electrical System); however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.

2015 BMW 428I

ID: 2070475

ENGINE AND ENGINE COOLING

The contact owns a 2015 BMW 428I. The contact received notification of NHTSA Campaign Number: 24V608000 (Engine and Engine Cooling, Electrical System); however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.

2015 BMW 428I

ID: 2068917

ELECTRICAL SYSTEM

The contact owns a 2015 BMW 428I. The contact received notification of NHTSA Campaign Number: 24V608000 (ENGINE AND ENGINE COOLING, ELECTRICAL SYSTEM); however, the part to do the recall repair was not yet available. The contact stated while driving at undisclosed speeds, smoke was coming from under the hood, entering the vehicle through the A/C vents. The local dealer was not contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The failure mileage was approximately 84,000. VIN tool confirms parts not available.

2015 BMW 428I

ID: 2068916

ENGINE AND ENGINE COOLING

The contact owns a 2015 BMW 428I. The contact received notification of NHTSA Campaign Number: 24V608000 (ENGINE AND ENGINE COOLING, ELECTRICAL SYSTEM); however, the part to do the recall repair was not yet available. The contact stated while driving at undisclosed speeds, smoke was coming from under the hood, entering the vehicle through the A/C vents. The local dealer was not contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The failure mileage was approximately 84,000. VIN tool confirms parts not available.

2015 BMW 428I

ID: 2068643

ELECTRICAL SYSTEM

Turbo lines leaking. My model vehicle is the same N20 engine components that were installed with the f30s in prior years. BMW had an in house recall for specific models and vins but did not include mine even though they were installed with the same issues that the previous models had. Now, the turbo lines are leaking, my car only has 85000. I shouldn’t have to pay over 3k for them to correct this.

2015 BMW 428I

ID: 2068642

VEHICLE SPEED CONTROL

Turbo lines leaking. My model vehicle is the same N20 engine components that were installed with the f30s in prior years. BMW had an in house recall for specific models and vins but did not include mine even though they were installed with the same issues that the previous models had. Now, the turbo lines are leaking, my car only has 85000. I shouldn’t have to pay over 3k for them to correct this.

2015 BMW 428I

ID: 2068641

ENGINE

Turbo lines leaking. My model vehicle is the same N20 engine components that were installed with the f30s in prior years. BMW had an in house recall for specific models and vins but did not include mine even though they were installed with the same issues that the previous models had. Now, the turbo lines are leaking, my car only has 85000. I shouldn’t have to pay over 3k for them to correct this.

2015 BMW 428I

ID: 2067355

ELECTRICAL SYSTEM

The contact owns a 2015 BMW 428I. The contact received notification of NHTSA Campaign Number: 24V608000 (Engine an Engine Cooling, Electrical System); however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.

2015 BMW 428I

ID: 2067354

ENGINE AND ENGINE COOLING

The contact owns a 2015 BMW 428I. The contact received notification of NHTSA Campaign Number: 24V608000 (Engine an Engine Cooling, Electrical System); however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.

2015 BMW 428I

ID: 2066773

ELECTRICAL SYSTEM

The contact owns a 2015 BMW 428I. The contact was notified of NHTSA Campaign Number: 24V608000 (Engine and Engine Cooling, Electrical System); however, the part to do the recall repair was not yet available. The local dealer was made aware of the issue and confirmed that parts were not yet available. The contact stated that an abnormal oil burning odor was coming from the vehicle. The check engine warning light became illuminated. The vehicle was taken to an independent mechanic, and it was discovered that there was oil leaking from the gasket and onto the bank 1 sensor, which caused the sensor to become corroded. The mechanic linked the failure to the recall. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The vehicle was taken to a dealer and the contact was provided an estimate for a diagnostic test. The contact stated that the vehicle was not repaired, and the engine was overheating. The failure mileage was approximately 84,000. VIN tool confirms parts not available.

2015 BMW 428I

ID: 2066772

ENGINE AND ENGINE COOLING

The contact owns a 2015 BMW 428I. The contact was notified of NHTSA Campaign Number: 24V608000 (Engine and Engine Cooling, Electrical System); however, the part to do the recall repair was not yet available. The local dealer was made aware of the issue and confirmed that parts were not yet available. The contact stated that an abnormal oil burning odor was coming from the vehicle. The check engine warning light became illuminated. The vehicle was taken to an independent mechanic, and it was discovered that there was oil leaking from the gasket and onto the bank 1 sensor, which caused the sensor to become corroded. The mechanic linked the failure to the recall. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The vehicle was taken to a dealer and the contact was provided an estimate for a diagnostic test. The contact stated that the vehicle was not repaired, and the engine was overheating. The failure mileage was approximately 84,000. VIN tool confirms parts not available.

2015 BMW 428I

ID: 2066675

ELECTRICAL SYSTEM

The contact owns a 2015 BMW 428I. The contact received notification of NHTSA Campaign Number: 24V608000 (Engine and Engine Cooling, Electrical System); however, the part to do the recall repair was not yet available. The contact stated that while driving at an undisclosed speed, there was white smoke coming from under the hood. No warning light was illuminated. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the failure. The failure mileage was approximately 61,000. VIN tool confirms parts not available.

2015 BMW 428I

ID: 2066674

ENGINE AND ENGINE COOLING

The contact owns a 2015 BMW 428I. The contact received notification of NHTSA Campaign Number: 24V608000 (Engine and Engine Cooling, Electrical System); however, the part to do the recall repair was not yet available. The contact stated that while driving at an undisclosed speed, there was white smoke coming from under the hood. No warning light was illuminated. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the failure. The failure mileage was approximately 61,000. VIN tool confirms parts not available.

2015 BMW 428I

ID: 2058427

ELECTRICAL SYSTEM

The contact's daughter owns a 2015 BMW 428I. The contact received notification of NHTSA Campaign Number: 24V608000 (Engine and Engine Cooling, Electrical System); however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.

2015 BMW 428I

ID: 2058426

ENGINE AND ENGINE COOLING

The contact's daughter owns a 2015 BMW 428I. The contact received notification of NHTSA Campaign Number: 24V608000 (Engine and Engine Cooling, Electrical System); however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.

2015 BMW 428I

ID: 2052291

ELECTRICAL SYSTEM

The contact owns a 2015 BMW 428I. The contact received notification of NHTSA Campaign Number: 24V608000 (Engine and Engine Cooling, Electrical System); however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The dealer was contacted and confirmed that parts were not yet available. The manufacturer was not made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.

2015 BMW 428I

ID: 2052290

ENGINE AND ENGINE COOLING

The contact owns a 2015 BMW 428I. The contact received notification of NHTSA Campaign Number: 24V608000 (Engine and Engine Cooling, Electrical System); however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The dealer was contacted and confirmed that parts were not yet available. The manufacturer was not made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.