2010 BMW 328I

AIR BAGS:FRONTAL

BMW of North America, LLC (BMW) is recalling certain 2006-2011 3 Series Sedan (324i, 325i, 325xi, 328i, 328xi, 330i, 330xi, 335i, 335xi), 2006-2012 3 Series Sportswagon (325xi, 328i, 328xi), and 2009-2011 3 Series Sedan (335d) vehicles. The original steering wheel may have been replaced with a sport or M-sport steering wheel equipped with an inflator that can explode during deployment.

Risk: An inflator explosion may result in sharp metal fragments striking the driver or other occupants, resulting in serious injury or death.

AIR BAGS:FRONTAL:DRIVER SIDE:INFLATOR MODULE

BMW of North America, LLC (BMW) is recalling certain 2008-2013 128i and 135i Convertibles, 128i, 135i, and M Coupes, 2007-2010 X3 30si and X3 xDrive30i, 2013-2015 X1 sDrive28i, X1 xDrive28i and X1 xDrive35i, 2007-2013 328i, 328i xDrive, 335i, 335is, 335i xDrive and M3 Coupes, 2006-2011 328i, 328xi, 328i xDrive, 325i, 325xi, 330i, 330xi, 335i, 335xi, 335i xDrive and M3, 2009-2011 335D, 2006-2012 325xi, 328i, 328xi and 328i xDrive, 2010-2011 X6 ActiveHybrid, 2007-2013 328i, 335i, 335is, M3 Coupes, X5 30si, X5 xDrive30i, X5 xDrive35i, X5 48i, X5 xDrive48i, X5 xDrive50i and X5 M, 2009-2013 X5 xDrive35d and 2008-2014 X6 xDrive35i, X6 xDrive50i and X6M vehicles equipped with non-desiccated driver frontal air bag inflators containing phase stabilized ammonium nitrate (PSAN) that were used as interim remedy parts for previous Takata recalls. These inflators may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, high temperatures, and high temperature cycling.

Risk: An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.

ELECTRICAL SYSTEM:WIRING

BMW of North America, LLC (BMW) is recalling certain 2006-2011 323i, 325i, 325xi, 328i, 328xi, 330i, 330xi, 335i, 335xi and M3, 2007-2011 328i xDrive, 335i xDrive and 335is and 2009-2011 335d vehicles. The wiring and electrical connectors for the system that controls air flow for the heating and air conditioning system may overheat.

Risk: Wiring that overheats could cause the electrical connectors to melt, and increase the risk of a fire, even when the vehicle is unattended.

ENGINE AND ENGINE COOLING:EXHAUST SYSTEM:EMISSION CONTROL:CRANKCASE (PCV)

BMW of North America, LLC (BMW) is recalling certain 2008-2011 128i and 2007-2011 328i, 328xi, 328i xDrive, 525i, 525xi, 528i, 528xi, 530i, 530xi, X3 3.0si, X3 xDrive30i, X5 xDrive30i, Z4 3.0i, Z4 3.0si and Z4 sDrive30i vehicles. The heater for the positive crankcase ventilation (PCV) valve may short circuit.

Risk: An electrical short can cause the parts within the PCV valve to melt, increasing the risk of a fire, even when the vehicle is not in use.

ENGINE AND ENGINE COOLING:ENGINE

BMW of North America, LLC (BMW) is recalling certain model year 2010-2011 128i Coupe, 128i Convertible, 328i Sedan, 328i xDrive Sedan, 328i Coupe, 328i Convertible, 328i Sports Wagon and Z4 sDrive 30i, 2011-2012 135i Coupe, 135i Convertible, 335i Sedan, X5 xDrive 35i, and X6 xDrive 35i, 2011 335i xDrive Sedan, 335i Coupe, 335i Convertible, 528i Sedan, 535i Sedan, 535i xDrive Sedan, X3 xDrive 28i, and X3 xDrive 35i, 2010 X3 xDrive 30i, and X5 xDrive 30i, 2012 640i Coupe, and 640i Convertible and 2010-2012 535i Gran Turismo vehicles. In the affected vehicles, the bolts that secure the housing for the variable camshaft timing adjustment (VANOS) unit can loosen over time and may possibly break.

Risk: If the bolts loosen or break the engine may have reduced power or stall. An engine stall increases the risk of a crash.

ENGINE AND ENGINE COOLING

A few months ago, I tried to get the above-referenced recall item taken care of at BMW of West Houston (Texas). I was told by the dealership service advisor that it would take at least two days to get the work done. The recall notice, of course, says the work should take about four hours. I was also told that in many cases the valve cover gets bent when performing this work and the cost of the replacement valve cover would be my responsibility. I was very disappointed of course. I don't think that I should pay for anything related to getting a safety recall taken care of. Safety recalls are very serious and for that reason I have sent the enclosed letter to BMW of North America I have also sent a letter to BMW of West Houston, 20822 Katy Freeway, Katy, TX 77449 expressing my disappointment. I am hopeful that I can get this recall, and the several other recalls this particularly car is subject to, taken care· of soon and without much drama. I would appreciate any guidance you can provide.

VEHICLE SPEED CONTROL

The contact owns a 2010 BMW 328I. The contact stated that while driving at an undisclosed speed, the accelerator pedal was depressed; however, the vehicle failed to accelerate as intended. The contact stated the vehicle lost motive power, and the contact drifted over to the shoulder of the roadway. The vehicle was restarted and driven to the intended destination. The vehicle was not diagnosed or repaired by an independent mechanic or the dealer. The manufacturer was made aware of the failure but provided no assistance. The contact was advised to contact the NHTSA Hotline to report the failure. The failure mileage was approximately 135,645.

ENGINE

The contact owns a 2010 BMW 328I. The contact stated that while driving at an undisclosed speed, the accelerator pedal was depressed; however, the vehicle failed to accelerate as intended. The contact stated the vehicle lost motive power, and the contact drifted over to the shoulder of the roadway. The vehicle was restarted and driven to the intended destination. The vehicle was not diagnosed or repaired by an independent mechanic or the dealer. The manufacturer was made aware of the failure but provided no assistance. The contact was advised to contact the NHTSA Hotline to report the failure. The failure mileage was approximately 135,645.