2012 AUTOCAR XPERT

PARKING BRAKE

Autocar, LLC (Autocar) is recalling certain 2012-2016 Xpert, 2010-2020 Xspotter, 2008-2020 Xpeditor, 2008-2010 WXLL and WX vehicles. A worn parking brake control valve can leak air into the vent line, creating excessive back pressure and causing the parking brake to release unexpectedly.

Risk: The unexpected release of the parking brake may allow the vehicle to rollaway, increasing the risk of a crash.

SUSPENSION

Autocar Industries, LLC (Autocar) is recalling certain model year 2012-2015 Xpert trucks manufactured November 30, 2011, to November 5, 2014 and having a 164-inch wheelbase and a sweeper body which is mounted with a gap between the cab and the body (where optional equipment could be installed). When being driven at speeds above 25mph, the affected vehicles may have an unexpected bounce.

Risk: The unexpected bounce may cause the operator to lose control of the vehicle, increasing the risk of a crash.

STEERING:COLUMN

Autocar Industries, LLC (Autocar) is recalling certain model year 2012-2014 Xpert vehicles manufactured July 11, 2011, through March 5, 2014. The bolts that secure the steering column mounting bracket could be below the required torque and possibly cause the steering column to come loose.

Risk: A loose steering column may make it difficult to steer the vehicle, increasing the risk of a crash.

SERVICE BRAKES, AIR

Autocar Industries, LLC (Autocar) is recalling certain model year 2012-2014 Xpert vehicles manufactured July 11, 2011, through March 5, 2014. The bolts securing the brake valve to the cab may be below the required torque which could cause a failure in the connection of the airlines and the brake valve. Thus, the vehicles do not conform to Federal Motor Vehicle Safety Standard (FMVSS) number 121, "Air Brake Systems."

Risk: Low bolt torque may result in a loss of brake line air pressure, increasing the risk of a crash.

SEAT BELTS

Autocar Industries, LLC (Autocar) is recalling certain model year 2012-2014 Xpert vehicles manufactured July 11, 2011, through March 5, 2014. The bolts used to anchor the seat belts may be insufficiently tight to withstand the forces experienced in certain crashes. As such, these vehicles do not conform to Federal Motor Vehicles Safety Standard (FMVSS) number 209, "Seat Belt Assemblies."

Risk: If the seat belt does not properly restrain the seat occupant, there is an increased risk of injury in the event of a crash.

SEATS

Autocar Industries, LLC (Autocar) is recalling certain model year 2012-2014 Xpert vehicles manufactured July 11, 2011, through March 5, 2014. During manufacturing, the floor mat may have been captured between the seat brackets and the cab sheet metal at all four connection points. This could cause the torque on the bolts to relax to below the required torque, allowing them to loosen. As such, these vehicles do not conform to Federal Motor Vehicle Safety Standard (FMVSS) number 207, "Seating Systems."

Risk: Loose bolts may allow the seat to move in the event of a crash, increasing the risk of injury to the seat occupant.

SEAT BELTS

Autocar Industries, LLC is recalling certain model year 2012 Xpert vehicles manufactured October 17, 2011, through September 17, 2012; and with serial numbers in the range 213522 through 215336. The seat belt anchorages fail to sustain the 3000 pound forces for the specified length of time. Therefore, these vehicles fail to conform to the requirements of Federal Motor Vehicle Safety Standard No. 210, "Seat Belt Assembly Anchorages."

Risk: In the event of a crash, an insufficient seat belt anchorage may prevent the seat belt from properly restraining the occupant. This increases the risk of injury to the seat occupant.