📧 info@texaslemonlaw.com 📞 +1 866 777 5045
Free Consultation Available

2020 ALTEC AERIAL DEVICE

View all complaints and recalls for this specific model year.

2020 ALTEC AERIAL DEVICE Summary

2020

Model Year

0

Total Complaints

22

Total Recalls

16303

Vehicles Affected

Recalls

2020 ALTEC AERIAL DEVICE

1128 vehicles affected

24V362000

EQUIPMENT:MECHANICAL:BOOM/CRANE/LADDER

Altec Industries, Inc. (Altec) is recalling certain 2020-2024 Altec LR7 and LR8 aerial devices. The hydraulic cylinder feeder tube routed near the cylinder rest bracket may become damaged and leak oil, which can result in uncontrolled boom movement.

Risk: Uncontrolled movement of the boom can increase the risk of injury.

2020 ALTEC AERIAL DEVICE

437 vehicles affected

24V015000

ELECTRICAL SYSTEM:12V/24V/48V BATTERY:CABLES

Altec Industries, Inc. (Altec) is recalling certain 2004-2023 AT Series aerial devices. The cables in the engine compartment may contact the vehicle's hood, damaging the cables and causing a short circuit.

Risk: A short circuit increases the risk of a fire.

2020 ALTEC AERIAL DEVICE

59 vehicles affected

23V395000

FORWARD COLLISION AVOIDANCE: AUTOMATIC EMERGENCY BRAKING

Altec Industries, Inc. (Altec) is recalling certain 2020-2023 D4000B, D2000B, and AC18 trucks. The collision mitigation system software may not be calibrated correctly, prohibiting the active braking system from activating.

Risk: An active braking system that fails to activate as intended increases the risk of a crash.

2020 ALTEC AERIAL DEVICE

1967 vehicles affected

23V216000

STRUCTURE:BODY

Altec Industries, Inc. (Altec) is recalling certain 2016-2022 DM, DH, DC, DL, D2000, D3000, and D4000 series digger derricks, and AM55 aerial devices. The base of the rear pole rack may be missing a weld.

Risk: A missing weld on the rear pole rack can lead to a crack that could cause the pole and rack to drop in height, increasing the risk of an injury.

2020 ALTEC AERIAL DEVICE

18 vehicles affected

23V438000

ELECTRICAL SYSTEM

Altec Industries, Inc. (Altec) is recalling certain 2019-2022 AT335 vehicles. An inverter-powered outlet may have been installed at the aerial boom tip without ground-fault interrupter (GFCI) protection.

Risk: An outlet without GFCI protection may fail to shut off electrical power when a ground-fault occurs, increasing the risk of injury or fire.

2020 ALTEC AERIAL DEVICE

167 vehicles affected

22V071000

EQUIPMENT:MECHANICAL:BOOM/CRANE/LADDER

Altec Industries, Inc. (Altec) is recalling certain 2018-2021 DC and DM Series Digger Derricks and AM series Aerial Devices. The unit subbase may develop cracks in the bulkhead plate, which can cause the shear plates to fail.

Risk: Shear plate failure can result in the separation of the subbase and truck frame, increasing the risk of injury.

2020 ALTEC AERIAL DEVICE

46 vehicles affected

22V146000

EQUIPMENT

Altec Industries, Inc. (Altec) is recalling certain 2017-2021 SK185-MP, and SKC landscaping spray vans. The vehicles are not equipped with carbon monoxide detectors.

Risk: Elevated levels of carbon monoxide gas may not be detected, increasing the risk of injury.

2020 ALTEC AERIAL DEVICE

454 vehicles affected

22V072000

EQUIPMENT:MECHANICAL:BOOM/CRANE/LADDER:TURNTABLE

Altec Industries, Inc. (Altec) is recalling certain 2019-2021 ATTXX-M/P/S aerial devices. Bolts in the rotation bearing outer-race may have been over-tightened, allowing the bolts to break.

Risk: Broken bolts can cause separation of the pedestal and turntable, increasing the risk of injury.

2020 ALTEC AERIAL DEVICE

71 vehicles affected

22V794000

EQUIPMENT:MECHANICAL:BOOM/CRANE/LADDER

Altec Industries, Inc. (Altec) is recalling certain 2019-2022 AT41ME aerial devices. The material handling interlocking valve may lose power when the outriggers are not set, allowing the jib winch to be operated while the outriggers are up.

Risk: Outriggers that are not set when loads are being lifted by the jib winch may cause the unit to tip, increasing the risk of injury.

2020 ALTEC AERIAL DEVICE

594 vehicles affected

22V577000

ELECTRICAL SYSTEM:WIRING:FUSES AND CIRCUIT BREAKERS

Altec Industries, Inc. (Altec) is recalling certain 2017-2021 Altec AT200A, AT235, AT235P, AT237, AT37G, AT40G, AT41M, and CB5-132D-S aerial devices. A wire to the boom stow sensor may be routed over a sharp edge, which can expose the wire to metal and result in a blown ignition circuit fuse.

Risk: A blown fuse can cause an engine stall, increasing the risk of a crash.

2020 ALTEC AERIAL DEVICE

157 vehicles affected

22V058000

EQUIPMENT:MECHANICAL:BOOM/CRANE/LADDER:TURNTABLE

Altec Industries, Inc. (Altec) is recalling certain 2017-2021 LS60 aerial devices. The outer-race rotation bearing bolt washers may interfere with an adjacent pedestal weld, which could cause the rotation bearing bolts to break.

Risk: Broken bolts can cause the pedestal to separate from the turntable, increasing the risk of injury.

2020 ALTEC AERIAL DEVICE

213 vehicles affected

21V012000

EQUIPMENT:MECHANICAL:BOOM/CRANE/LADDER

Altec Industries, Inc. (Altec) is recalling certain 2016-2020 DH-B Series, DH-E Series, and D3000-E digger derricks set up for combined use and equipped with radio remote upper controls. These units only have the derrick use capacity chart and do not have the combined use capacity chart.

Risk: The operator may not have access to the rated capacity information while they are operating the equipment in combined use, increasing the risk of an injury.

2020 ALTEC AERIAL DEVICE

150 vehicles affected

21V998000

EQUIPMENT:MECHANICAL:BOOM/CRANE/LADDER:MOTOR/HYDRAULIC PUMP

Altec Industries, Inc. (Altec) is recalling certain 2017-2021 AN67-E100, AA67-E100, AN67, AA67, and AN55-E88 aerial devices. The hydraulic plumbing to the lift cylinders of the lower and upper booms could be connected incorrectly, allowing the boom to overextend.

Risk: The operator could overextend the boom while using the material handling jib, causing the aerial device to tip over and increasing the risk of injury.

2020 ALTEC AERIAL DEVICE

218 vehicles affected

21V464000

EQUIPMENT

Altec Industries, Inc. (Altec) is recalling certain 2020-2021 AT200A, AT235, AT235P Aerial Devices. Bolts of insufficient strength may have been used to connect the pedestal and sub-base, which could cause the bolts to become overloaded.

Risk: Overloaded bolts can fail, causing the pedestal to separate and increasing the risk of injury or death.

2020 ALTEC AERIAL DEVICE

94 vehicles affected

21V722000

EQUIPMENT:MECHANICAL:BOOM/CRANE/LADDER:TURNTABLE

Altec Industries, Inc. (Altec) is recalling certain 2016-2021 LS87 aerial devices. The outer-race rotation bearing bolt washers may interfere with an adjacent pedestal weld, which could cause the rotation bearing bolts to break.

Risk: Broken bolts can cause the pedestal to separate from the turntable, increasing the risk of injury.

2020 ALTEC AERIAL DEVICE

1977 vehicles affected

21V409000

EQUIPMENT

Altec Industries, Inc. (Altec) is recalling certain 2005-2021 A65, A70, A75, A72-T, A77-T, and A82-T vehicles. The lower and upper boom raise spools can shift after releasing the joystick or control interlock.

Risk: Unintended movement of the lower and upper booms increases the risk of injury.

2020 ALTEC AERIAL DEVICE

396 vehicles affected

20V301000

TRAILER HITCHES

Altec Industries Inc. (Altec) is recalling certain 2014-2020 Aerial Devices and body only units equipped with Class 3 towing hitches. The tow hitch may have incorrect load rating markings, and may have been damaged by unintentional overloading.

Risk: If the tow hitch is overloaded, the hitch may fail, increasing the risk of a crash.

2020 ALTEC AERIAL DEVICE

157 vehicles affected

20V282000

EQUIPMENT

Altec Industries Inc. (Altec) is recalling certain 2018-2020 AA55, AM50 and A77 Aerial Devices and D2, D3, D4, DH-B and DH-H Digger Derricks. The bolts that secure the pedestal to the turntable (with head marking 5185) may fail.

Risk: If the fasteners break, the pedestal may separate from turntable, increasing the risk of injury or death.

2020 ALTEC AERIAL DEVICE

280 vehicles affected

20V587000

EQUIPMENT

Altec Industries Inc. (Altec) is recalling certain 2019-2020 AA55, AM50, A77-T Aerial Devices and D2/3/4B, D3E, DHB, DHH and DHE Digger Derricks. The bolts that secure the pedestal to the turntable (with head marking 5252) may fail.

Risk: If the fasteners break, the pedestal may separate from the turntable, increasing the risk of injury or death.

2020 ALTEC AERIAL DEVICE

2550 vehicles affected

20V401000

ENGINE AND ENGINE COOLING:EXHAUST SYSTEM

Altec Industries, Inc. (Altec) is recalling certain 2017-2020 AT200A, AT235, AT37-G, AT40-G, AT41/48M Aerial Devices mounted on a Ford F-350, F-450 or F-550 chassis equipped with a gas engine and Chelsea 249 Power Take-Off (PTO). The PTO may leak oil onto the exhaust heat shield thermal blanket.

Risk: Oil absorbed by the exhaust heat shield thermal blanket has an increased risk of a fire from being exposed to hot engine components.

2020 ALTEC AERIAL DEVICE

183 vehicles affected

20V777000

EQUIPMENT

Altec Industries, Inc. (Altec) is recalling certain 2020 AN67-E100 articulating non-overcenter aerial device vehicles. The boom valve has a shuttle cartridge installed instead of a plug.

Risk: The valve not having a plug could result in unintended boom movement, increasing the risk of an injury.

2020 ALTEC AERIAL DEVICE

4987 vehicles affected

20V765000

EQUIPMENT

Altec Industries, Inc. (Altec) is recalling certain 2018-2020 AA, AM, AN, A-Class, TA, DM, DL, DXXXX, DC, and DT digger derricks and aerial device vehicles equipped with a DC pump. A hydraulic check valve can have a snap ring failure resulting in the snap ring becoming lodged in a counterbalance or control valve allowing continued movement.

Risk: Unintended boom movement may result in potential injury and or property damage.

Complaints

No complaints found.